Data sheet (PDF) Data sheet (PDF)

Datasheet

Intel single-CPU TI108+ tower server

[Ver. 1.0]
Highlights at a glance:
  • Incl. 1x Intel Xeon Bronze 3204, can be expanded to up to 1x CPUs (6 - 24 cores)
  • Incl. 16 GB RAM, upgradable to 1TB RAM, (8 DIMMs)
  • 8x 3.5" / 2.5" (Hot-swap) up to 176 TB, SSDs: 61.44 TB
  • Expandable with 5 FP/ FL add-on card(s), 2x PCIe 3.0 x16 1x PCIe 3.0 x4 (in x8) 2x PCIe 3.0 x8
  • Energy-efficient power supply 80 PLUS Gold (>87%) red. NT (opt.)
  • Integrated IPMI (dedicated NIC)
Mainboards
Manufacturer Supermicro
Mainboards Supermicro X11SPi-TF
Chipset Intel C622
Socket Intel LGA 3647-0
Processor Intel Xeon Scalable 2nd Gen (Cascade Lake)
Main Memory 8 DIMMs
1 TB DDR4 2133/2400/2666/2933 RDIMM
LAN Onboard 2x 10 Gbit/s LAN (RJ-45)
LAN chipset Intel X557, Intel X722
LAN Onboard (dedicated IPMI) 1x Aspeed AST2500 (dedicated IPMI)
Onboard graphic 1x VGA Aspeed AST2500 BMC
Additional card (optional) PNY NVIDIA Quadro T1000 (4GB)
Onboard Input/Output USB (no PS2 ports!)
1x TPM Header
2x COM Ports (1 rear, 1 header)
USB ports 4x USB (rear) (2x USB 2.0, 2x USB 3.0)
(4x USB 2.0, 2x USB 3.0)
1x USB on board (type A) (USB 3.0)
Extension-slots for additional cards
PCI slots (mainboard) 2x PCIe 3.0 x16
1x PCIe 3.0 x4 (in x8)
2x PCIe 3.0 x8

Available slots in the chassis 5x Full profile/Full Length
Onboard ports
SATA-3 (6 Gb/s) 10x SATA-3 (6 Gbit/s) Intel C622
RAID 0, 1, 10, 5, Software-Raid
M.2 1 x M.2 PCIe 3.0 x4, SATA
M.2 form factor 2280, 22110
Drives / storage capacity
Drive slots (total) 8x 3.5" / 2.5" (Hot-swap)
4x 2.5"

Backplane SATA / SAS-3 (12 Gb/s)
Max. capacity HDD (SAS) 176 TB
Max. capacity HDD (SATA) 176 TB
Max. capacity SSD (SATA) 61.44 TB
Max. capacity SSD (SATA) 61.44 TB
Server management
Management software Supermicro SuperDoctor 5
Remote management Integrated IPMI (dedicated NIC)
Features Managementsoftware IPMI View
IPMI with KVM Over LAN
Serial Over LAN (SOL)
Virtual Media Over LAN (Virtual USB Floppy/CD and Drive Redirection)
LAN Alert-SNMP Trap
Event Log
OS Independent
Hardware Health Monitor
Remote Power Control
Support RMCP & RMCP + Protocols
Fan Speed Control
Dedicated 3. network interface card
IPMI-sensors CPU-temperature (OK / warning)
system-temperature (Celsius degree)
Electronic voltage (volt)
Cooler speed (RPM)
Additional model-dependent sensors (www.thomas-krenn.com/ipmi-sensoren)
Chassis
Unit 5U
Dimensions 425 mm (H), 220 mm (W), 620 mm (D),
668 mm (D) (incl. front panel)
drives (in scope of delivery) not contained, optional available
Drives (optional) 2x 5,25'' Laufwerk
Front USB ports 2
Power supply
Power supply unit 750 Watt Silent Netzteil (80plus Gold)
energy efficiency 90%
Redundant power supply (selectable option) Optional
Rack Assembly
Assembly rails 19" conversion-kit possible, optional available
rail length 770 - 950 mm mm
Total length server front to end of assembly rail 800 mm
Max. extraction length 685 mm
Recommended maneuvering space 75 mm (minimum)
environment-requirements
Recommended ambient temperature 20 - 22 degree
Recommended humidity max. 40%
Recommended deployment location Thanks to its design and low noise output (with optional silent kit), the system is optimally equipped for use in the office. With the 19” rack assembly conversion kit, the server can also be installed in a rack.