Data sheet (PDF) Data sheet (PDF)

Datasheet

Intel dual-CPU TI208 tower server

[Ver. 1.0]
Highlights at a glance:
  • Incl. 1x Intel Xeon Bronze 3204, can be expanded to up to 2x CPUs (6 - 24 cores)
  • Incl. 16 GB RAM, upgradable to 2TB RAM, (16 DIMMs)
  • Expandable with 6 FP/ FL add-on card(s), 4x PCIe 3.0 x16 2x PCIe 3.0 x8
  • 10GBase-T dual-port on board LAN (optional)
  • 8x 3.5" / 2.5" (Hot-swap) up to 176 TB, SSDs: 61.44 TB
  • Quiet operation with the low-noise kit (optional)
  • Integrated IPMI (dedicated NIC)
Mainboards
Manufacturer Supermicro
 Supermicro
Mainboards Supermicro X11DPi-N(T) X11DPi-NT
Chipset Intel C621 Intel C622
Socket Intel LGA 3647-0 Intel LGA 3647-0
Processor Intel Xeon Scalable 2nd Gen (Cascade Lake) Intel Xeon Scalable 2nd Gen (Cascade Lake)
Main Memory 16 DIMMs (of which 4x NvDIMM)
2 TB DDR4 2400/2666 RDIMM		 16 DIMMs (of which 4x NvDIMM)
2 TB DDR4 2400/2666 RDIMM
LAN Onboard 2 x 1 GBit/s LAN (RJ-45)
2x 10 Gbit/s LAN (RJ-45)
LAN chipset Marvell 88E1512 Intel X557
LAN Onboard (dedicated IPMI) 1x RJ45 dedicated IPMI LAN port 1x RJ45 Dedicated IPMI LAN port
Onboard graphic 1x VGA Aspeed AST2500 BMC 1x VGA Aspeed AST2500 BMC
Additional card (optional) PNY NVIDIA Quadro T1000 (4GB) PNY NVIDIA Quadro T1000 (4GB)
Onboard Input/Output USB (no PS2 ports!)
1x TPM Header
2x COM Ports (1 rear, 1 header)
 USB (no PS2 ports!)
1x TPM Header
2x COM Ports (1 rear, 1 header)
USB ports 2x USB (rear)

1x USB on board (type A)		 4x USB (rear)

1x USB on board (type A)
Extension-slots for additional cards
PCI slots (mainboard) 4x PCIe 3.0 x16
2x PCIe 3.0 x8

 4x PCIe 3.0 x16
2x PCIe 3.0 x8
Available slots in the chassis 6x Full profile/Full Length 6x Full profile/Full Length
Onboard ports
SATA-3 (6 Gb/s) 14x SATA-3 (6 Gbit/s) Intel C621
RAID 0, 1, 10, 5, Software-Raid
 14x SATA-3 (6 Gbit/s) Intel C622
RAID 0, 1, 10, 5, Software-Raid
Port distribution 8x Intel PCH
4x Intel SCU
2x SuperDOM support
 8x Intel PCH
4x Intel SCU
2x SuperDOM support
M.2 1 x M.2 PCIe 3.0 x4 1 x M.2 PCIe 3.0 x4
M.2 form factor 2260, 2280, 22110 2260, 2280, 22110
NVMe 2x NVMe onboard 2x NVMe onboard
Drives / storage capacity
Drive slots (total) 8x 3.5" / 2.5" (Hot-swap)
4x 2.5"

Backplane SATA / SAS-3 (12 Gb/s)
Max. capacity HDD (SAS) 176 TB
Max. capacity HDD (SATA) 176 TB
Max. capacity SSD (SATA) 61.44 TB
Max. capacity SSD (SATA) 61.44 TB
Server management
Management software Supermicro SuperDoctor 5
Remote management Integrated IPMI (dedicated NIC)
Features Managementsoftware IPMI View
IPMI with KVM Over LAN
Serial Over LAN (SOL)
Virtual Media Over LAN (Virtual USB Floppy/CD and Drive Redirection)
LAN Alert-SNMP Trap
Event Log
OS Independent
Hardware Health Monitor
Remote Power Control
Support RMCP & RMCP + Protocols
Fan Speed Control
Dedicated 3. network interface card
IPMI-sensors CPU-temperature (OK / warning)
system-temperature (Celsius degree)
Electronic voltage (volt)
Cooler speed (RPM)
Additional model-dependent sensors (www.thomas-krenn.com/ipmi-sensoren)
Chassis
Unit 5U
Dimensions 425 mm (H), 220 mm (W), 620 mm (D),
668 mm (D) (incl. front panel)
drives (in scope of delivery) not contained, optional available
Drives (optional) 2x 5,25'' Laufwerk
Front USB ports 2
Power supply
Power supply unit 750 Watt Silent Netzteil (80plus Gold)
energy efficiency 90%
Redundant power supply (selectable option) Optional
Rack Assembly
Assembly rails 19" conversion-kit possible, optional available
rail length 770 - 950 mm mm
Total length server front to end of assembly rail 800 mm
Max. extraction length 685 mm
Recommended maneuvering space 75 mm (minimum)
environment-requirements
Recommended ambient temperature 20 - 22 degree
Recommended humidity max. 40%
Recommended deployment location Thanks to its design and low noise output (with optional silent kit), the system is optimally equipped for use in the office. With the 19” rack assembly conversion kit, the server can also be installed in a rack.