Datasheet

1U AMD single-CPU RA1104-SMEPFH server

[Ver. 1.0]
Highlights at a glance:
  • Incl. 1x AMD EPYC 7252, can be equipped with a CPU (AMD EPYC 7002/7003 (Rome/Milan)) up to 16 cores
  • Incl. 16 GB RAM, upgradable to 1TB RAM, (8 DIMMs)
  • 4x 2.5" (Not hot-swap) up to 30.72 TB Non-Hotswap
  • Expandable with 2 LP/ HL additional card(s)
  • 429 mm (D) installation depth saves space
  • Energy-efficient power supply 80 PLUS Platinum (>94%)
  • Integrated IPMI (dedicated NIC)
Mainboards
Manufacturer Supermicro
Supermicro
Mainboards Supermicro H12SSW-iN Supermicro H12SSW-NT
Socket AMD SP3 AMD SP3
Processor AMD EPYC 7002/7003 (Rome/Milan) AMD EPYC 7002/7003 (Rome/Milan)
Main Memory 8 DIMMs
1 TB DDR4 3200 RDIMM/SDRAM Registered
8 DIMMs
1 TB DDR4 3200 RDIMM
LAN Onboard 2 x 1 GBit/s LAN (RJ-45)
2x 10 Gbit/s LAN (RJ-45)
LAN chipset Broadcom BCM5720L Broadcom BCM57416
LAN Onboard (dedicated IPMI) 1x Realtek RTL8211E PHY (dedicated IPMI) 1x Realtek RTL8211E PHY (dedicated IPMI)
Onboard graphic 1x VGA 1x VGA
Onboard Input/Output USB (no PS2 ports!)
1x TPM 2.0 header
1x COM port (rear)
USB (no PS2 ports!)
1x TPM 2.0 header
1x COM port (rear)
USB ports 4x USB (rear) (USB 3.0)

1x USB on board (type A) (USB 3.0)
4x USB (rear) (USB 3.0)

1x USB on board (type A) (USB 3.0)
Extension-slots for additional cards
PCI slots (mainboard) 2x PCIe 4.0 x16

2x PCIe 4.0 x16
Available slots in the chassis 2x Low profile/Half Length/Full profile 2x Low profile/Half Length/Full profile
Possible Riser cards 1x PCIe (x16) riser card
1x PCIe (x16) riser card
Onboard ports
SATA-3 (6 Gb/s) 16x SATA-3 (6 Gbit/s)

16x SATA-3 (6 Gbit/s)
M.2 2 x M.2 PCIe 3.0 x2, SATA 2 x M.2 PCIe 3.0 x2, SATA
M.2 form factor 2280, 22110 2280, 22110
NVMe 4x NVMe onboard 4x NVMe onboard
Drives / storage capacity
Drive slots (total) 4x 2.5" (Not hot-swap)
4x 2.5"

SAS / SATA slots 4x SAS / SATA
Backplane without Backplane
Max. capacity HDD (SATA) 30.72 TB
Max. capacity SSD (SATA) 30.72 TB
Server management
Management software Supermicro SuperDoctor 5
Remote management Integrated IPMI (dedicated NIC)
Features Managementsoftware IPMI View
IPMI with KVM Over LAN
Serial Over LAN (SOL)
Virtual Media Over LAN (Virtual USB Floppy/CD and Drive Redirection)
LAN Alert-SNMP Trap
Event Log
OS Independent
Hardware Health Monitor
Remote Power Control
Support RMCP & RMCP + Protocols
Fan Speed Control
Dedicated 3. network interface card
IPMI-sensors CPU-temperature (OK / warning)
system-temperature (Celsius degree)
Electronic voltage (volt)
Cooler speed (RPM)
Chassis
Unit 1U
Dimensions 43 mm (H), 437 mm (W), 429 mm (D),
drives (in scope of delivery) not contained, optional available
Drives (optional) External USB-drives
Coolers (rear) 4x 40x56mm Fans 40x56mm non-hot-swap (11000rpm, )
Silent blowerkit option no
Power supply
Power supply unit 350 Watt Netzteil (80plus Platinum)
energy efficiency 94%
PMBus support No
Rack Assembly
Assembly rails contained in the scope of supply
environment-requirements
Recommended ambient temperature 10 - 35 °C
Recommended humidity 10 - 90% (noncondensing)
Recommended deployment location To ensure the optimal cooling of the system, we recommend running the server in an air conditioned server room and as part of a rack installation. The server is not ideal for use in an office environment due to its high noise levels.