Data sheet (PDF) Data sheet (PDF)

Datasheet

1U AMD single-CPU RA1104-SMEPH

[Ver. 1.0]
Highlights at a glance:
  • Incl. 1x AMD EPYC 7252, can be equipped with a CPU (AMD EPYC 7002/7003 (Rome/Milan)) up to 64 cores
  • Incl. 16 GB RAM, upgradable to 1TB RAM, (8 DIMMs)
  • 4x 3.5" / 2.5" (Hot-swap) up to 88 TB, SSDs: 30.72 TB
  • Expandable with 1 FP/LP/ HL additional card(s)
  • Energy-efficient power supply 80 PLUS Platinum (>94%) red. NT (opt.)
  • 503 mm (D) installation depth saves space
  • Integrated IPMI (dedicated NIC)
Mainboards
Manufacturer Supermicro
 Supermicro Supermicro
Mainboards H12SSL-i H12SSL-NT H12SSL-CT
Chipset AMD System on Chip AMD System on Chip AMD System on Chip
Socket AMD SP3 AMD SP3 AMD SP3
Processor AMD EPYC 7002/7003 (Rome/Milan) AMD EPYC 7002/7003 (Rome/Milan) AMD EPYC 7002/7003 (Rome/Milan)
Main Memory 8 DIMMs
1 TB DDR4 3200 RDIMM/SDRAM		 8 DIMMs
1 TB DDR4 3200 RDIMM/SDRAM		 8 DIMMs
1 TB DDR4 3200 RDIMM/SDRAM
LAN Onboard 2 x 1 GBit/s LAN (RJ-45)
2x 10 Gbit/s LAN (RJ-45)
2x 10 Gbit/s LAN (RJ-45)
LAN chipset Broadcom BCM5720 Broadcom BCM57416 Broadcom BCM57416
LAN Onboard (dedicated IPMI) 1 1 1
Onboard graphic 1x VGA Aspeed AST2500 BMC 1x VGA Aspeed AST2500 BMC 1x VGA Aspeed AST2500 BMC
Onboard Input/Output USB (no PS2 ports!)
1x TPM 2.0 header
1x COM port (rear)
 USB (no PS2 ports!)
1x TPM 2.0 header
1x COM port (rear)
 USB (no PS2 ports!)
1x TPM 2.0 header
1x COM port (rear)
USB ports 4x USB (rear) (USB 3.0)

0x USB on board (type A)		 4x USB (rear) (USB 3.0)

0x USB on board (type A)		 4x USB (rear) (USB 3.0)

0x USB on board (type A)
Extension-slots for additional cards
PCI slots (mainboard) 5x PCIe 4.0 x16
2x PCIe 4.0 x8

 5x PCIe 4.0 x16
2x PCIe 4.0 x8
 5x PCIe 4.0 x16
2x PCIe 4.0 x8
Available slots in the chassis 1x Full profile/Half Length 1x Full profile/Half Length 1x Full profile/Half Length
Possible Riser cards 1x PCI-E (x16) riser card
 1x PCI-E (x16) riser card
 1x PCI-E (x16) riser card
Onboard ports
SATA-3 (6 Gb/s) 16x SATA-3 (6 Gbit/s) AMD SoC
No integrated RAID function
 16x SATA-3 (6 Gbit/s) AMD SoC
No integrated RAID function		 8x SATA-3 (6 Gbit/s) AMD SoC
RAID 0, 1, 10
M.2 2 x M.2 PCIe 3.0 x4 2 x M.2 PCIe 3.0 x4 2 x M.2 PCIe 3.0 x4
M.2 form factor 2280, 22110 2280, 22110 2280, 22110
SAS-3 (12Gb/s) 0x SAS-3 (12 Gb/s)
0x SAS-3 (12 Gb/s)
8x SAS-3 (12 Gb/s)
Raid 0, 1, 10
NVMe 2x NVMe onboard 4x NVMe onboard 0x NVMe onboard
Drives / storage capacity
Drive slots (total) 4x 3.5" / 2.5" (Hot-swap)


Backplane SATA / SAS-3 (12 Gb/s)
Max. capacity HDD (SAS) 88 TB
Max. capacity HDD (SATA) 88 TB
Max. capacity SSD (SATA) 30.72 TB
Max. capacity SSD (SATA) 30.72 TB
Server management
Management software Supermicro SuperDoctor 5
Remote management Integrated IPMI (dedicated NIC)
Features Managementsoftware IPMI View
IPMI with KVM Over LAN
Serial Over LAN (SOL)
Virtual Media Over LAN (Virtual USB Floppy/CD and Drive Redirection)
LAN Alert-SNMP Trap
Event Log
OS Independent
Hardware Health Monitor
Remote Power Control
Support RMCP & RMCP + Protocols
Fan Speed Control
Dedicated 3. network interface card
Temperature Monitoring and Recovery
Email Alerting
IPMI-sensors CPU-temperature (OK / warning)
system-temperature (Celsius degree)
Electronic voltage (volt)
Cooler speed (RPM)
Additional model-dependent sensors (www.thomas-krenn.com/ipmi-sensoren)
Chassis
Unit 1U
Dimensions 43 mm (H), 437 mm (W), 503 mm (D),
drives (in scope of delivery) not contained, optional available
Drives (optional) 1x Slim CD/DVD/DVD-R
External USB-drives
Fan (center) 4x 40x40x28mm non-hot-swap (17500rpm, 57.5dBA)
Silent blowerkit option no
Power supply
Power supply unit 1x 350 Watt Netzteil (80plus Platinum)
energy efficiency 92.51%
PMBus support PSU single: no, redundant PSU: Yes, Ver.1.2
Rack Assembly
Assembly rails contained in the scope of supply
rail length 660 - 845 mm
Total length server front to end of assembly rail 705 mm
Max. extraction length 710 mm
Recommended maneuvering space 75 mm (minimum)
environment-requirements
Recommended ambient temperature 20 - 22 degree
Recommended humidity max. 40%
Recommended deployment location To ensure the optimal cooling of the system, we recommend running the server in an air conditioned server room and as part of a rack installation. The server is not ideal for use in an office environment due to its high noise levels.