Adaptec Series 1 HBAs

Hinweis: Bitte beachten Sie, dass dieser Artikel / diese Kategorie sich entweder auf ältere Software/Hardware Komponenten bezieht oder aus sonstigen Gründen nicht mehr gewartet wird. Diese Seite wird nicht mehr aktualisiert und ist rein zu Referenzzwecken noch hier im Archiv abrufbar.

In diesem Artikel finden Sie Informationen zu Adaptec Serie 1 Host Bus Adapter.

Allgemeine Informationen

• HBA Serie: Adaptec Serie 1 HBAs
• Schnittstelle: 3GB/s SAS/SATA / PCIe
• Bauhöhe: Low Profile (zusätzliches belüftetes Slotblech für Low Profile)

Modelle

HBA	Ports intern	Ports extern	PCIe Lanes	Max. Anzahl HDDs/SSDs bei Verw. von SAS Expandern	Anmerkungen
Adaptec ASC-1405	4	-	4	128
Adaptec ASC-1045	-	4	4	128

Versionsinformationen

Build 5010 (08 Jan 2010)

• Release Notes Build 5010 (aus zip Datei), Auszug aus Enhancements and Bug Fixes:
  • Quick Boot option added to the CTRL-A BIOS, that when enabled will reduce the standard 10 second per device discovery to 4 seconds by default. Further configuration can be defined by setting a value between 1 and 10 seconds. Only devices displayed within this defined time frame will be dispayed.

Build 4012 (20 Mar 2009)

• Release Notes Build 4012 (aus zip Datei), Auszug aus Enhancements and Bug Fixes:
  • Resolved multiple issues with AFU Verify and Display functions.
    • AFU Verify function changes:
      • The message displayed during the reading of the flash content was changed to a single line.
      • When the content of the flash is different then the file, it will now display the checksum for the image in flash and the file for comparison.
      • The full flash build number is now displayed properly when a Verify is completed.
      • Increased response time of the Verify function.
    • AFU Display function changes:
      • The full flash build number is now displayed properly.
      • Increased response time of the Display function.
  • Resolved an issue with being unable to boot SLES 10 SP2 OS from attached SAS drives when a SATA CD was attached to the same controller and set as the primary boot device with media inserted.
  • Resolved an issue preventing Windows installation from seeing devices installed in an Enhance Technology RS8SS enclosure. During a Windows installation, after the driver was loaded (by pressing F6) Windows would respond with: "Setup either detected multiple disks in your machine that are indistinguishable or detected Raw disks. Setup has corrected the problem but a reboot is required. Setup cannot continue". Rebooting system would bring back to the same error. This error has been corrected and no reboot is required.
  • Resolved an issue where the BIOS would stop responding and displayed "Adaptec HBA Reset failure. Please reboot" error when no LUNs were assigned.

Autor: Thomas Niedermeier Thomas Niedermeier arbeitet im Product Management Team von Thomas-Krenn. Er absolvierte an der Hochschule Deggendorf sein Studium zum Bachelor Wirtschaftsinformatik. Seit 2013 ist Thomas bei Thomas-Krenn beschäftigt und kümmert sich unter anderem um OPNsense Firewalls, das Thomas-Krenn-Wiki und Firmware Sicherheitsupdates.