1U Intel Single-CPU RI1102H Server with TKmon

Please note that this article / this category refers either on older software / hardware components or is no longer maintained for other reasons. This page is no longer updated and is purely for reference purposes still here in the archive available.

This article will show you details about the 1U Intel Single-CPU RI1102H Server with pre-installed TKmon.

Further details on BIOS versions and other Wiki articles can be found at the linked Wiki article of the motherboard.

Server Details

Motherboard: Asus P9D-MV Motherboard
Chassis: CSE-512L-260B
New with version 1.0:
- Motherboard Asus P9D-MV
- Intel Xeon E3-1200 v3 CPUs (Haswell)

Can the same battery be used for every Motherboard? Yes, all systems use a CR2032 battery.
Why is no Red Hat or Suse software available for this server / pc? Thomas Krenn servers / pcs are not officially certified by Red Hat or Suse certification programs. There would be no support by Red Hat or Suse in case of issues with the operating system.
What is the recommended ambient temperature and air humidity for this system? The recommended ambient temperature is between 20-22 degrees celsius, the max. air humidity 40%.

First steps to activate the RA1102H with TKmon. Afterwards, you can do the TKmon Set-up.
After starting the LES with TKmon the IP address is displayed on a connected monitor.
The web interface of TKmon clearly shows the status of all monitored services.
LES with TKmon uses Ubuntu 12.04 LTS (Kernel 3.2) as operating system. OS Updates can be applied via the web interface.