Intel D3-S4510 M.2 Series SSDs

Dieser Artikel enthält Detail-Informationen zu Intel D3-S4510 M.2 Series SSDs. Einen Überblick über alle Intel SSD Serien zeigt der Artikel Intel SSDs im Überblick.

IOPS Diagramm aus Intel D3-S4510 M.2 TKperf Testreport (PDF)

Intel D3-S4510 M.2 960 GB Modell
(Board Oberseite)

Intel D3-S4510 M.2 960 GB Modell
(Board Unterseite)

Allgemeine Informationen

SSD Serie: Intel D3-S4510 M.2
Datenblätter:
- Intel D3-S4510 M.2 Product Brief
- Intel D3-S4510 M.2 Product Specification
Formfaktor: M.2
NAND Flash Memory: 3D NAND TLC
Schnittstelle: SATA 6 Gb/s ("SATA III")
TKperf Testeinstellungen: Queue Depth 32 und 4 Jobs
Weitere Informationen:
- Intel Solid-State Drive Data Center Tool (Kommandozeilen-Werkzeug zur Verwaltung von Intel SSDs)
Besonderheiten:
- Enhanced Power Loss Data Protection
- Consistent I/O Latency
- Temperature Monitoring and Logging
- End-to-End Data Protection

TKperf Testreport

Intel D3-S4510 M.2 TKperf Testreport

Modelle

SSD	Kapazität (netto)	Kapazität (brutto)	Spare Area (GB und % zus. zur Netto-Kap.)	Flash-Chips	Haltbarkeit (Endurance)	Durchsatz (max. Bandbreite)		IOPS (max. Random IOPS Performance)
SSD	Kapazität (netto)	Kapazität (brutto)	Spare Area (GB und % zus. zur Netto-Kap.)	Flash-Chips	Haltbarkeit (Endurance)	Lesen	Schreiben	Lesen	Schreiben (über erste 8 GiB)	Schreiben (über ges. Datenbereich)
SSDSCKKB240G801	240 GB (n/a Byte)	n/a GiB (n/a GB)	n/a GB (n/a%)	n/a	0,85 PBW	555 MB/s	275 MB/s	87.000 IOPS	n/a	16.000 IOPS
SSDSCKKB480G801	480 GB (n/a Byte)	n/a GiB (n/a GB)	n/a GB (n/a%)	n/a	1,15 PBW	555 MB/s	480 MB/s	91.000 IOPS	n/a	18.000 IOPS
SSDSCKKB960G801	960 GB (n/a Byte)	n/a GiB (n/a GB)	n/a GB (n/a%)	n/a	1,3 PBW	555 MB/s	480 MB/s	91.000 IOPS	n/a	23.000 IOPS

Firmware

Date	Revision	Description
July 2020	XC311132	Information from Intel Solid-State Drive Data Center Tool 3.0.26 Release Notes: The following changes are included in this firmware update: n/a
May 2020	XC311120	Information from Intel Solid-State Drive Data Center Tool 3.0.26 Release Notes: The following changes are included in this firmware update: Smart attributes fix
March 2019	XC311102 (MR1)	Information from Intel Solid-State Drive Data Center Tool 3.0.19 Release Notes: The following changes are included in this firmware update: Resolved issue related to intermittent drive drop during initial boot.
n/a	XC311100	Keine Informationen zur Firmware verfügbar.

Quelle: Firmware Release Notes oder Auslesen von SSD-Informationen.

Programmausgaben

smartctl

smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-51-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Intel S4510/S4610/S4500/S4600 Series SSDs
Device Model:     INTEL SSDSCKKB960G8
Serial Number:    PHYH850500YA960L
LU WWN Device Id: 5 5cd2e4 150640a78
Firmware Version: XC311102
User Capacity:    960.197.124.096 bytes [960 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    Solid State Device
Form Factor:      M.2
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-3 T13/2161-D revision 5
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Mon Jun 17 10:53:00 2019 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x02) Offline data collection activity
                                        was completed without error.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (    2) seconds.
Offline data collection
capabilities:                    (0x79) SMART execute Offline immediate.
                                        No Auto Offline data collection support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        (   2) minutes.
Conveyance self-test routine
recommended polling time:        (   2) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  5 Reallocated_Sector_Ct   0x0032   100   100   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       354
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       61
170 Available_Reservd_Space 0x0033   100   100   010    Pre-fail  Always       -       0
171 Program_Fail_Count      0x0032   100   100   000    Old_age   Always       -       0
172 Erase_Fail_Count        0x0032   100   100   000    Old_age   Always       -       0
174 Unsafe_Shutdown_Count   0x0032   100   100   000    Old_age   Always       -       34
175 Power_Loss_Cap_Test     0x0033   100   100   010    Pre-fail  Always       -       2651 (61 21277)
183 SATA_Downshift_Count    0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error_Count  0x0033   100   100   090    Pre-fail  Always       -       0
187 Uncorrectable_Error_Cnt 0x0032   100   100   000    Old_age   Always       -       0
190 Drive_Temperature       0x0022   062   062   000    Old_age   Always       -       38 (Min/Max 33/58)
192 Unsafe_Shutdown_Count   0x0032   100   100   000    Old_age   Always       -       34
194 Temperature_Celsius     0x0022   100   100   000    Old_age   Always       -       38
197 Pending_Sector_Count    0x0012   100   100   000    Old_age   Always       -       0
199 CRC_Error_Count         0x003e   100   100   000    Old_age   Always       -       0
225 Host_Writes_32MiB       0x0032   100   100   000    Old_age   Always       -       1646576
226 Workld_Media_Wear_Indic 0x0032   100   100   000    Old_age   Always       -       1515
227 Workld_Host_Reads_Perc  0x0032   100   100   000    Old_age   Always       -       19
228 Workload_Minutes        0x0032   100   100   000    Old_age   Always       -       20652
232 Available_Reservd_Space 0x0033   100   100   010    Pre-fail  Always       -       0
233 Media_Wearout_Indicator 0x0032   099   099   000    Old_age   Always       -       0
234 Thermal_Throttle_Status 0x0032   100   100   000    Old_age   Always       -       0/1
235 Power_Loss_Cap_Test     0x0033   100   100   010    Pre-fail  Always       -       2651 (61 21277)
241 Host_Writes_32MiB       0x0032   100   100   000    Old_age   Always       -       1646576
242 Host_Reads_32MiB        0x0032   100   100   000    Old_age   Always       -       390211
243 NAND_Writes_32MiB       0x0032   100   100   000    Old_age   Always       -       2437676

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Completed without error       00%        70         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

hdparm

/dev/sdb:

ATA device, with non-removable media
        Model Number:       INTEL SSDSCKKB960G8
        Serial Number:      PHYH850500YA960L
        Firmware Revision:  XC311102
        Media Serial Num:
        Media Manufacturer:
        Transport:          Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0
Standards:
        Used: unknown (minor revision code 0x006d)
        Supported: 10 9 8 7 6 5
        Likely used: 10
Configuration:
        Logical         max     current
        cylinders       16383   0
        heads           16      0
        sectors/track   63      0
        --
        LBA    user addressable sectors:   268435455
        LBA48  user addressable sectors:  1875385008
        Logical  Sector size:                   512 bytes
        Physical Sector size:                  4096 bytes
        Logical Sector-0 offset:                  0 bytes
        device size with M = 1024*1024:      915715 MBytes
        device size with M = 1000*1000:      960197 MBytes (960 GB)
        cache/buffer size  = unknown
        Form Factor: unknown (0x0007]
        Nominal Media Rotation Rate: Solid State Device
Capabilities:
        LBA, IORDY(can be disabled)
        Queue depth: 32
        Standby timer values: spec'd by Standard, no device specific minimum
        R/W multiple sector transfer: Max = 1   Current = 1
        DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
             Cycle time: min=120ns recommended=120ns
        PIO: pio0 pio1 pio2 pio3 pio4
             Cycle time: no flow control=120ns  IORDY flow control=120ns
Commands/features:
        Enabled Supported:
           *    SMART feature set
                Security Mode feature set
           *    Power Management feature set
           *    Write cache
           *    Look-ahead
           *    WRITE_BUFFER command
           *    READ_BUFFER command
           *    NOP cmd
           *    DOWNLOAD_MICROCODE
           *    48-bit Address feature set
           *    Mandatory FLUSH_CACHE
           *    FLUSH_CACHE_EXT
           *    SMART error logging
           *    SMART self-test
           *    General Purpose Logging feature set
           *    WRITE_{DMA|MULTIPLE}_FUA_EXT
           *    64-bit World wide name
           *    IDLE_IMMEDIATE with UNLOAD
           *    WRITE_UNCORRECTABLE_EXT command
           *    {READ,WRITE}_DMA_EXT_GPL commands
           *    Segmented DOWNLOAD_MICROCODE
           *    unknown 119[6]
           *    unknown 119[8]
           *    Gen1 signaling speed (1.5Gb/s)
           *    Gen2 signaling speed (3.0Gb/s)
           *    Gen3 signaling speed (6.0Gb/s)
           *    Native Command Queueing (NCQ)
           *    Phy event counters
           *    READ_LOG_DMA_EXT equivalent to READ_LOG_EXT
           *    Software settings preservation
           *    SMART Command Transport (SCT) feature set
           *    SCT Write Same (AC2)
           *    SCT Error Recovery Control (AC3)
           *    SCT Features Control (AC4)
           *    SCT Data Tables (AC5)
           *    SANITIZE_ANTIFREEZE_LOCK_EXT command
           *    SANITIZE feature set
           *    CRYPTO_SCRAMBLE_EXT command
           *    OVERWRITE_EXT command
           *    BLOCK_ERASE_EXT command
           *    reserved 69[2]
           *    reserved 69[3]
           *    reserved 69[4]
           *    Data Set Management TRIM supported (limit 4 blocks)
           *    Deterministic read ZEROs after TRIM
Security:
        Master password revision code = 65534
                supported
        not     enabled
        not     locked
        not     frozen
        not     expired: security count
                supported: enhanced erase
        6min for SECURITY ERASE UNIT. 6min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 55cd2e4150640a78
        NAA             : 5
        IEEE OUI        : 5cd2e4
        Unique ID       : 150640a78
Checksum: correct

Einzelnachweise

Autor: Werner Fischer

Werner Fischer arbeitet im Product Management Team von Thomas-Krenn. Er evaluiert dabei neueste Technologien und teilt sein Wissen in Fachartikeln, bei Konferenzen und im Thomas-Krenn Wiki. Bereits 2005 - ein Jahr nach seinem Abschluss des Studiums zu Computer- und Mediensicherheit an der FH Hagenberg - heuerte er beim bayerischen Server-Hersteller an. Als Öffi-Fan nutzt er gerne Bus & Bahn und genießt seinen morgendlichen Spaziergang ins Büro.