Intel D3-S4610 Series SSDs

Dieser Artikel enthält Detail-Informationen zu Intel D3-S4610 Series SSDs. Einen Überblick über alle Intel SSD Serien zeigt der Artikel Intel SSDs im Überblick.

IOPS Diagramm aus Intel D3-S4610 TKperf Testreport (PDF)

Intel D3-S4610 480 GB Modell

Intel D3-S4610 480 GB Modell
(Board Oberseite)

Intel D3-S4610 480 GB Modell
(Board Unterseite)

Allgemeine Informationen

SSD Serie: Intel D3-S4610
Datenblätter:
- Intel D3-S4610 Product Brief
- Intel D3-S4610 Product Specification
Formfaktor: 2,5"
NAND Flash Memory: 3D NAND TLC
Schnittstelle: SATA 6 Gb/s ("SATA III")
TKperf Testeinstellungen: Queue Depth 64 und 4 Jobs
Weitere Informationen:
- Intel D3 S4610 Series SSDs (ark.intel.com)
- Intel Solid-State Drive Data Center Tool (Kommandozeilen-Werkzeug zur Verwaltung von Intel SSDs)
Besonderheiten:
- Enhanced Power Loss Data Protection
- AES 256 bit Hardware Encryption
- Temperature Monitoring and Logging
- End-to-End Data Protection

TKperf Testreport

Intel D3-S4610 TKperf Testreport

Modelle

SSD	Kapazität	Haltbarkeit (Endurance)	Durchsatz (max. Bandbreite)		IOPS (max. Random IOPS Performance)
SSD	Kapazität	Haltbarkeit (Endurance)	Lesen MB/s	Schreiben MB/s	Lesen IOPS	Schreiben IOPS
SSDSC2KG240G801	240 GB	1,4 PBW	560	320	92.000	28.000
SSDSC2KG480G801	480 GB	3,0 PBW	560	510	96.000	44.500
SSDSC2KG960G801	960 GB	6,0 PBW	560	510	96.000	51.000
SSDSC2KG019T801	1,92 TB	10,0 PBW	560	510	97.000	46.500
SSDSC2KG038T801	3,84 TB	22,0 PBW	560	510	96.000	42.000

Firmware

Date	Revision	Description
July 2020	XCV10132	Information from Intel Solid-State Drive Data Center Tool 3.0.26 Release Notes:^[1]This release of the Intel SSD Data Center Tool includes a firmware update for: Intel SSD D3-S4510 and SSD D3-S4610: Firmware update to XCV10132
May 2020	XCV10120 (MR2) with Hop-on Firmware XCV1011D	Information from Intel Solid-State Drive Data Center Tool 3.0.25 Release Notes:^[2]The following changes are included in this firmware update: Intel SSD D3-S4510 and SSD D3-S4610 Series: Firmware update to XCV10120 with smart attributes fix firmware Hop-on Firmware XCV1011D is integrated in the tool
October 2019	XCV10120 (MR2)	Information from Intel Solid-State Drive Data Center Tool 3.0.22 Release Notes:^[2] MR2 firmware release.
March 2019	XCV10110 (MR1)	Information from Intel Solid-State Drive Data Center Tool 3.0.19 Release Notes:^[2] The following changes are included in this firmware update: Resolved 1.92TB and 3.84TB SKUs may become unresponsive at 1700 hrs. of cumulative Idle Power On Hours.
n/a	XCV10100	Keine Informationen zur Firmware verfügbar.

Quelle: Firmware Release Notes oder Auslesen von SSD-Informationen.

Programmausgaben

smartctl

smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-39-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Family:     Intel S4510/S4610/S4500/S4600 Series SSDs
Device Model:     INTEL SSDSC2KG480G8
Serial Number:    BTYG83320430480BGN
LU WWN Device Id: 5 5cd2e4 14fdd9f27
Firmware Version: XCV10100
User Capacity:    480.103.981.056 bytes [480 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    Solid State Device
Form Factor:      2.5 inches
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   ACS-3 T13/2161-D revision 5
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Wed Nov 14 13:37:49 2018 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(    0) seconds.
Offline data collection
capabilities: 			 (0x79) SMART execute Offline immediate.
					No Auto Offline data collection support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (   2) minutes.
Conveyance self-test routine
recommended polling time: 	 (   2) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  5 Reallocated_Sector_Ct   0x0032   100   100   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       2
170 Available_Reservd_Space 0x0033   100   100   010    Pre-fail  Always       -       0
171 Program_Fail_Count      0x0032   100   100   000    Old_age   Always       -       0
172 Erase_Fail_Count        0x0032   100   100   000    Old_age   Always       -       0
174 Unsafe_Shutdown_Count   0x0032   100   100   000    Old_age   Always       -       2
175 Power_Loss_Cap_Test     0x0033   100   100   010    Pre-fail  Always       -       2762 (2 36)
183 SATA_Downshift_Count    0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error_Count  0x0033   100   100   090    Pre-fail  Always       -       0
187 Uncorrectable_Error_Cnt 0x0032   100   100   000    Old_age   Always       -       0
190 Drive_Temperature       0x0022   072   072   000    Old_age   Always       -       28 (Min/Max 15/28)
192 Unsafe_Shutdown_Count   0x0032   100   100   000    Old_age   Always       -       2
194 Temperature_Celsius     0x0022   100   100   000    Old_age   Always       -       28
197 Pending_Sector_Count    0x0012   100   100   000    Old_age   Always       -       0
199 CRC_Error_Count         0x003e   100   100   000    Old_age   Always       -       0
225 Host_Writes_32MiB       0x0032   100   100   000    Old_age   Always       -       0
226 Workld_Media_Wear_Indic 0x0032   100   100   000    Old_age   Always       -       65535
227 Workld_Host_Reads_Perc  0x0032   100   100   000    Old_age   Always       -       65535
228 Workload_Minutes        0x0032   100   100   000    Old_age   Always       -       65535
232 Available_Reservd_Space 0x0033   100   100   010    Pre-fail  Always       -       0
233 Media_Wearout_Indicator 0x0032   100   100   000    Old_age   Always       -       0
234 Thermal_Throttle_Status 0x0032   100   100   000    Old_age   Always       -       0/0
235 Power_Loss_Cap_Test     0x0033   100   100   010    Pre-fail  Always       -       2762 (2 36)
241 Host_Writes_32MiB       0x0032   100   100   000    Old_age   Always       -       0
242 Host_Reads_32MiB        0x0032   100   100   000    Old_age   Always       -       0
243 NAND_Writes_32MiB       0x0032   100   100   000    Old_age   Always       -       15

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

hdparm


/dev/sdb:

ATA device, with non-removable media
	Model Number:       INTEL SSDSC2KG480G8                     
	Serial Number:      BTYG83320430480BGN  
	Firmware Revision:  XCV10100
	Media Serial Num:   
	Media Manufacturer: 
	Transport:          Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0
Standards:
	Used: unknown (minor revision code 0x006d) 
	Supported: 10 9 8 7 6 5 
	Likely used: 10
Configuration:
	Logical		max	current
	cylinders	16383	0
	heads		16	0
	sectors/track	63	0
	--
	LBA    user addressable sectors:   268435455
	LBA48  user addressable sectors:   937703088
	Logical  Sector size:                   512 bytes
	Physical Sector size:                  4096 bytes
	Logical Sector-0 offset:                  0 bytes
	device size with M = 1024*1024:      457862 MBytes
	device size with M = 1000*1000:      480103 MBytes (480 GB)
	cache/buffer size  = unknown
	Form Factor: 2.5 inch
	Nominal Media Rotation Rate: Solid State Device
Capabilities:
	LBA, IORDY(can be disabled)
	Queue depth: 32
	Standby timer values: spec'd by Standard, no device specific minimum
	R/W multiple sector transfer: Max = 1	Current = 1
	DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 
	     Cycle time: min=120ns recommended=120ns
	PIO: pio0 pio1 pio2 pio3 pio4 
	     Cycle time: no flow control=120ns  IORDY flow control=120ns
Commands/features:
	Enabled	Supported:
	   *	SMART feature set
	    	Security Mode feature set
	   *	Power Management feature set
	   *	Write cache
	   *	Look-ahead
	   *	WRITE_BUFFER command
	   *	READ_BUFFER command
	   *	NOP cmd
	   *	DOWNLOAD_MICROCODE
	   *	48-bit Address feature set
	   *	Mandatory FLUSH_CACHE
	   *	FLUSH_CACHE_EXT
	   *	SMART error logging
	   *	SMART self-test
	   *	General Purpose Logging feature set
	   *	WRITE_{DMA|MULTIPLE}_FUA_EXT
	   *	64-bit World wide name
	   *	IDLE_IMMEDIATE with UNLOAD
	   *	WRITE_UNCORRECTABLE_EXT command
	   *	{READ,WRITE}_DMA_EXT_GPL commands
	   *	Segmented DOWNLOAD_MICROCODE
	   *	unknown 119[6]
	   *	unknown 119[8]
	   *	Gen1 signaling speed (1.5Gb/s)
	   *	Gen2 signaling speed (3.0Gb/s)
	   *	Gen3 signaling speed (6.0Gb/s)
	   *	Native Command Queueing (NCQ)
	   *	Phy event counters
	   *	READ_LOG_DMA_EXT equivalent to READ_LOG_EXT
	   *	Software settings preservation
	   *	SMART Command Transport (SCT) feature set
	   *	SCT Write Same (AC2)
	   *	SCT Error Recovery Control (AC3)
	   *	SCT Features Control (AC4)
	   *	SCT Data Tables (AC5)
	   *	SANITIZE_ANTIFREEZE_LOCK_EXT command
	   *	SANITIZE feature set
	   *	CRYPTO_SCRAMBLE_EXT command
	   *	OVERWRITE_EXT command
	   *	BLOCK_ERASE_EXT command
	   *	reserved 69[2]
	   *	reserved 69[3]
	   *	reserved 69[4]
	   *	Data Set Management TRIM supported (limit 4 blocks)
	   *	Deterministic read ZEROs after TRIM
Security: 
	Master password revision code = 65534
		supported
	not	enabled
	not	locked
		frozen
	not	expired: security count
		supported: enhanced erase
	4min for SECURITY ERASE UNIT. 4min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 55cd2e414fdd9f27
	NAA		: 5
	IEEE OUI	: 5cd2e4
	Unique ID	: 14fdd9f27
Checksum: correct

Einzelnachweise

↑ Intel Solid State Drive Data Center Tool Release Notes - July 2020 - Version 3.0.26 (downloadmirror.intel.com)
↑ ^2,0 ^2,1 ^2,2 Intel Solid State Drive Data Center Tool Release Notes - May 2020 - Version 3.0.25 (downloadmirror.intel.com)

Autor: Werner Fischer

Werner Fischer arbeitet im Product Management Team von Thomas-Krenn. Er evaluiert dabei neueste Technologien und teilt sein Wissen in Fachartikeln, bei Konferenzen und im Thomas-Krenn Wiki. Bereits 2005 - ein Jahr nach seinem Abschluss des Studiums zu Computer- und Mediensicherheit an der FH Hagenberg - heuerte er beim bayerischen Server-Hersteller an. Als Öffi-Fan nutzt er gerne Bus & Bahn und genießt seinen morgendlichen Spaziergang ins Büro.

Autor: Thomas Niedermeier

Thomas Niedermeier arbeitet im Product Management Team von Thomas-Krenn. Er absolvierte an der Hochschule Deggendorf sein Studium zum Bachelor Wirtschaftsinformatik. Seit 2013 ist Thomas bei Thomas-Krenn beschäftigt und kümmert sich unter anderem um OPNsense Firewalls, das Thomas-Krenn-Wiki und Firmware Sicherheitsupdates.

[ssd-tool-3026-1] Intel Solid State Drive Data Center Tool Release Notes - July 2020 - Version 3.0.26 (downloadmirror.intel.com)

[ssd-tool-3025-2] 2,0 ^2,1 ^2,2 Intel Solid State Drive Data Center Tool Release Notes - May 2020 - Version 3.0.25 (downloadmirror.intel.com)

[1]

[2]