1U Intel Single-CPU CSE512 Server
Jump to navigation
Jump to search
This article will show you details about the Thomas Krenn 1U Intel Single-CPU CSE512 Server.
Further details on BIOS versions and other Wiki articles can be found at the linked Wiki article of the motherboard.
Server Details
Version 3.*
- Motherboard: Supermicro X9SCM-F Motherboard
- Chassis: CSE-512L-260B
- New with version 3.1:
- Intel Xeon E3-1200v2 CPUs (Codename Ivy Bridge, 22nm process technology)
- New with version 3.0:
- Supermicro Motherboard X9SCM-F
- Intel Xeon E3-1200 CPUs (Codename Sandy Bridge, 32nm process technology)
- energy-saving DDR3 ECC RAM, up to 32 GB
- 2x SATA-3 onboard ports
- 4x SATA-2 onboard ports
Version 2.*
- Motherboard: Supermicro X8SIL and X8SIL-F Motherboard
- Chassis: CSE-512L-260B
- New with version 2.0:
- Supermicro X8SIL/X8SIL-F Motherboard (X8SIL without remote management) / (X8SIL-F with remote management)
- Intel Xeon 3400 CPUs (Codename Nehalem, 45nm process technology)
- DDR3 ECC Registered memory
FAQs
- Can the same battery be used for every Motherboard? Yes, all systems use a CR2032 battery.
- Why is no Red Hat or Suse software available for this server / pc? Thomas Krenn servers / pcs are not officially certified by Red Hat or Suse certification programs. There would be no support by Red Hat or Suse in case of issues with the operating system.
- What is the recommended ambient temperature and air humidity for this system? The recommended ambient temperature is between 20-22 degrees celsius, the max. air humidity 40%.
- Can two 2,5" HDD Mounting Kits be used in a CSE512 chassis to install four 2,5" HDDs? No, although two Mounting Kits would fit in this chassis, the HDDs of one side could not be connected due to shortage of space.
- Is it possible to install a Desktop Operating System on a Thomas Krenn Server? Desktop Operating Systems get not tested, as we do not support running them on Thomas Krenn servers. A proper operating is not guaranteed. An installation of a Desktop Operating System on a Thomas Krenn is at one's own risk and not supported by Thomas Krenn.
- Is it possible to use the dedicated IPMI NIC as a normal NIC visible to the operating system? No, this dedicated NIC port can only be used for remote management purposes.
- Is it possible to use a 3Ware 9690 RAID controller in a server system with a X9SCM-F motherboard? No, in our tests such a system ran very slow, and the RAID controller reported "Drive Timeouts".
Related articles
1U AMD Single-CPU CSE512 Server
2U Intel Dual-CPU SR2625 Server
2U Intel Single-CPU SC825 Server