wikiSamsung SM883 SATA SSDs
Zur Navigation springen
Zur Suche springen
Dieser Artikel enthält Detail-Informationen zu Samsung SM883 SSDs.
IOPS Diagramm aus SM883 TKperf Testreport (PDF)
Allgemeine Informationen
- SSD Serie: SM883
- Datenblätter:
- Formfaktor: 2,5"
- NAND Flash Memory: V-NAND v4 (64 Layer)
- Schnittstelle: SATA 6 Gb/s ("SATA III")
- TKperf Testeinstellungen: Queue Depth 16 und 2 Jobs
- Weitere Informationen:
- Enterprise SSD (samsung.com)
- Besonderheiten:
- AES 256 bit Hardware Encryption
- Power Loss Data Protection
TKperf Testreport
Modelle
| SSD | Kapazität (netto) |
Kapazität (brutto) |
Spare Area (GB und % zus. zur Netto-Kap.) |
Flash-Chips | Haltbarkeit (Endurance) |
Durchsatz (max. Bandbreite) |
IOPS (max. Random IOPS Performance) | |||
|---|---|---|---|---|---|---|---|---|---|---|
| Lesen | Schreiben | Lesen | Schreiben (über erste 8 GiB) |
Schreiben (über ges. Datenbereich) | ||||||
| MZ7KH240HAHQ | 240 GB (n/a Byte) |
n/a GiB (n/a GB) | n/a GB (n/a%) |
n/a | 1,314 PBW | 540 MB/s | 480 MB/s | 97.000 IOPS | n/a | 22.000 IOPS |
| MZ7KH480HAHQ | 480 GB (n/a Byte) |
n/a GiB (n/a GB) | n/a GB (n/a%) |
n/a | 2,628 PBW | 540 MB/s | 520 MB/s | 97.000 IOPS | n/a | 27.000 IOPS |
| MZ7KH960HAJR | 960 GB (n/a Byte) |
n/a GiB (n/a GB) | n/a GB (n/a%) |
n/a | 5,256 PBW | 540 MB/s | 520 MB/s | 97.000 IOPS | n/a | 29.000 IOPS |
| MZ7KH1T9HAJR | 1,92 TB (n/a Byte) |
n/a GiB (n/a GB) | n/a GB (n/a%) |
n/a | 10,512 PBW | 540 MB/s | 520 MB/s | 97.000 IOPS | n/a | 29.000 IOPS |
| MZ7KH3T8HALS | 3,84 TB (n/a Byte) |
n/a GiB (n/a GB) | n/a GB (n/a%) |
n/a | 21,024 PBW | 540 MB/s | 520 MB/s | 97.000 IOPS | n/a | 29.000 IOPS |
Firmware
| Date | Revision | Description |
|---|---|---|
| n/a | HXM7004Q | Keine Informationen zur Firmware verfügbar. |
Quelle: Firmware Release Notes oder Auslesen von SSD-Informationen.
Programmausgaben
smartctl
smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-54-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Samsung based SSDs
Device Model: SAMSUNG MZ7KH480HAHQ-00005
Firmware Version: HXM7104Q
User Capacity: 480.103.981.056 bytes [480 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: Unknown(0x0ffc), ACS-4 T13/BSR INCITS 529 revision 5
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Tue Jul 9 16:01:11 2019 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, NOT FROZEN [SEC1]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x53) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 35) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
9 Power_On_Hours -O--CK 099 099 000 - 239
12 Power_Cycle_Count -O--CK 099 099 000 - 24
177 Wear_Leveling_Count PO--C- 099 099 005 - 1
179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0
180 Unused_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 2098
181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0
182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0
183 Runtime_Bad_Block PO--C- 100 100 010 - 0
184 End-to-End_Error PO--CK 100 100 097 - 0
187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0
190 Airflow_Temperature_Cel -O--CK 066 053 000 - 34
194 Temperature_Celsius -O---K 066 053 000 - 34 (Min/Max 19/47)
195 ECC_Error_Rate -O-RC- 200 200 000 - 0
197 Current_Pending_Sector -O--CK 100 100 000 - 0
199 CRC_Error_Count -OSRCK 100 100 000 - 0
202 Exception_Mode_Status PO--CK 100 100 010 - 0
235 POR_Recovery_Count -O--C- 099 099 000 - 16
241 Total_LBAs_Written -O--CK 099 099 000 - 9065282
242 Total_LBAs_Read -O--CK 099 099 000 - 1873717305
243 SATA_Downshift_Ct -O--CK 100 100 000 - 0
244 Thermal_Throttle_St -O--CK 100 100 000 - 0
245 Timed_Workld_Media_Wear -O--CK 100 100 000 - 65535
246 Timed_Workld_RdWr_Ratio -O--CK 100 100 000 - 65535
247 Timed_Workld_Timer -O--CK 100 100 000 - 65535
251 NAND_Writes -O--CK 100 100 000 - 10110976
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 SATA NCQ Queued Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x12 GPL R/O 1 SATA NCQ NON-DATA log
0x13 GPL R/O 1 SATA NCQ Send and Receive log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa5 SL VS 16 Device vendor specific log
0xce SL VS 16 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 34 Celsius
Power Cycle Min/Max Temperature: 34/35 Celsius
Lifetime Min/Max Temperature: 19/47 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 1 minute
Temperature Logging Interval: 10 minutes
Min/Max recommended Temperature: 0/70 Celsius
Min/Max Temperature Limit: 0/70 Celsius
Temperature History Size (Index): 128 (45)
Index Estimated Time Temperature Celsius
46 2019-07-08 18:50 29 **********
... ..(117 skipped). .. **********
36 2019-07-09 14:30 29 **********
37 2019-07-09 14:40 ? -
38 2019-07-09 14:50 ? -
39 2019-07-09 15:00 ? -
40 2019-07-09 15:10 34 ***************
41 2019-07-09 15:20 34 ***************
42 2019-07-09 15:30 34 ***************
43 2019-07-09 15:40 ? -
44 2019-07-09 15:50 35 ****************
45 2019-07-09 16:00 34 ***************
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 24 --- Lifetime Power-On Resets
0x01 0x010 4 239 --- Power-on Hours
0x01 0x018 6 9065282 --- Logical Sectors Written
0x01 0x020 6 25334 --- Number of Write Commands
0x01 0x028 6 1873717305 --- Logical Sectors Read
0x01 0x030 6 3673356 --- Number of Read Commands
0x01 0x038 6 3476000 --- Date and Time TimeStamp
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 34 --- Current Temperature
0x05 0x020 1 47 --- Highest Temperature
0x05 0x028 1 19 --- Lowest Temperature
0x05 0x058 1 70 --- Specified Maximum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 134 --- Number of Hardware Resets
0x06 0x010 4 0 --- Number of ASR Events
0x06 0x018 4 0 --- Number of Interface CRC Errors
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 0 N-- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 0 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
hdparm
/dev/sdb:
ATA device, with non-removable media
Model Number: SAMSUNG MZ7KH480HAHQ-00005
Serial Number: S47MNE0K900209
Firmware Revision: HXM7104Q
Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0
Standards:
Used: unknown (minor revision code 0x005e)
Supported: 11 10 9 8 7 6 5
Likely used: 11
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 937703088
Logical Sector size: 512 bytes
Physical Sector size: 4096 bytes
Logical Sector-0 offset: 0 bytes
device size with M = 1024*1024: 457862 MBytes
device size with M = 1000*1000: 480103 MBytes (480 GB)
cache/buffer size = unknown
Form Factor: 2.5 inch
Nominal Media Rotation Rate: Solid State Device
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
SET_MAX security extension
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* WRITE_{DMA|MULTIPLE}_FUA_EXT
* 64-bit World wide name
Write-Read-Verify feature set
* WRITE_UNCORRECTABLE_EXT command
* {READ,WRITE}_DMA_EXT_GPL commands
* Segmented DOWNLOAD_MICROCODE
* Gen1 signaling speed (1.5Gb/s)
* Gen2 signaling speed (3.0Gb/s)
* Gen3 signaling speed (6.0Gb/s)
* Native Command Queueing (NCQ)
* Phy event counters
* READ_LOG_DMA_EXT equivalent to READ_LOG_EXT
* DMA Setup Auto-Activate optimization
* Asynchronous notification (eg. media change)
* Software settings preservation
unknown 78[12]
* SMART Command Transport (SCT) feature set
* SCT Write Same (AC2)
* SCT Error Recovery Control (AC3)
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
* SANITIZE_ANTIFREEZE_LOCK_EXT command
* SANITIZE feature set
* CRYPTO_SCRAMBLE_EXT command
* BLOCK_ERASE_EXT command
* reserved 69[4]
* DOWNLOAD MICROCODE DMA command
* SET MAX SETPASSWORD/UNLOCK DMA commands
* WRITE BUFFER DMA command
* READ BUFFER DMA command
* Data Set Management TRIM supported (limit 8 blocks)
* Deterministic read ZEROs after TRIM
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
supported: enhanced erase
32min for SECURITY ERASE UNIT. 32min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 5002538e000218e3
NAA : 5
IEEE OUI : 002538
Unique ID : e000218e3
Checksum: correct
Einzelnachweise
 |
Autor: Thomas Niedermeier Thomas Niedermeier arbeitet im Product Management Team von Thomas-Krenn. Er absolvierte an der Hochschule Deggendorf sein Studium zum Bachelor Wirtschaftsinformatik. Seit 2013 ist Thomas bei Thomas-Krenn beschäftigt und kümmert sich unter anderem um OPNsense Firewalls, das Thomas-Krenn-Wiki und Firmware Sicherheitsupdates.
|
Das könnte Sie auch interessieren
Samsung PM893 SATA SSDs
Samsung PM897 SATA SSDs
Samsung PM9A3 M.2 NVMe SSDs
