wikiSamsung PM893 SATA SSDs
Zur Navigation springen
Zur Suche springen
Samsung PM893 SATA SSDs bieten Durchsatzraten von bis zu 550 MB/s und sind von 240 GB bis zu 7,68 TB erhältlich. Mit 1 DWPD (Drive Writes per Day) und 15-30 K Write IOPS sind sie für den Einsatz mit VMware VSAN (Performance Class C/D) zertifiziert. Die Schwesterserie Samsung PM897 SATA SSDs bietet 3 DWPD.
IOPS Diagramm aus Samsung PM893 TKperf Testreport (PDF)
Allgemeine Informationen
- Formfaktor: 2,5 Zoll SATA SSD
- Flash Memory: Samsung V6 (128 Layer) TLC V-NAND
- Schnittstelle: SATA 3.3
- Test: Samsung PM893 240 GB TKperf Testreport (PDF)
Modelle
| Haltbarkeit (für 5 Jahre) |
Durchsatz | IOPS | VMware
VSAN IO HCL | |||||
|---|---|---|---|---|---|---|---|---|
| Lesen | Schreiben | Lesen | Schreiben | |||||
| MZ7L3240HCHQ-00A07 | 240 GB | 1,0 DWPD | 550 MB/s | 380 MB/s | 98 K | 15 K | ID 50110 | Minimum
Firmware Version JXTC104Q |
| MZ7L3480HCHQ-00A07 | 480 GB | 520 MB/s | 29 K | ID 50075 | ||||
| MZ7L3960HCJR-00A07 | 960 GB | 30K | ID 50076 | |||||
| MZ7L31T9HBLT-00A07 | 1,92 TB | ID 50077 | ||||||
| MZ7L33T8HBLT-00A07 | 3,84 TB | ID 50078 | ||||||
| MZ7L37T6HBLA-00A07 | 7,68 TB | ID 50079 | ||||||
Firmware
| Date | Revision | Description |
|---|---|---|
| n/a | JXTC104Q | Quelle: Auslesen von SSD-Informationen / VMware VSAN IO HCL |
| n/a | JXTC304Q | Quelle: Auslesen von SSD-Informationen |
Programmausgaben
smartctl
Ausgabe von smartctl -x (unter Debian 12, drivedb.h manuell aktualisiert):
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-9-amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Samsung based SSDs
Device Model: SAMSUNG MZ7L3240HCHQ-00A07
Serial Number: S663NA0T805646
LU WWN Device Id: 5 002538 f02818a53
Firmware Version: JXTC304Q
User Capacity: 240,057,409,536 bytes [240 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
TRIM Command: Available, deterministic, zeroed
Device is: In smartctl database
ATA Version is: ACS-4 T13/BSR INCITS 529 revision 5
SATA Version is: SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Fri Jun 16 08:08:31 2023 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM feature is: Unavailable
APM feature is: Unavailable
Rd look-ahead is: Enabled
Write cache is: Enabled
DSN feature is: Unavailable
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x53) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
No Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 25) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
5 Reallocated_Sector_Ct PO--CK 100 100 010 - 0
9 Power_On_Hours -O--CK 099 099 000 - 1
12 Power_Cycle_Count -O--CK 099 099 000 - 6
177 Wear_Leveling_Count PO--C- 100 100 005 - 0
179 Used_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 0
180 Unused_Rsvd_Blk_Cnt_Tot PO--C- 100 100 010 - 223
181 Program_Fail_Cnt_Total -O--CK 100 100 010 - 0
182 Erase_Fail_Count_Total -O--CK 100 100 010 - 0
183 Runtime_Bad_Block PO--C- 100 100 010 - 0
184 End-to-End_Error PO--CK 100 100 097 - 0
187 Uncorrectable_Error_Cnt -O--CK 100 100 000 - 0
190 Airflow_Temperature_Cel -O--CK 058 058 000 - 42
194 Temperature_Celsius -O---K 058 058 000 - 42 (Min/Max 26/42)
195 ECC_Error_Rate -O-RC- 200 200 000 - 0
197 Current_Pending_Sector -O--CK 100 100 000 - 0
199 CRC_Error_Count -OSRCK 100 100 000 - 0
202 Exception_Mode_Status PO--CK 100 100 010 - 0
235 POR_Recovery_Count -O--C- 099 099 000 - 2
241 Total_LBAs_Written -O--CK 099 099 000 - 36102805
242 Total_LBAs_Read -O--CK 099 099 000 - 2187931
243 SATA_Downshift_Ct -O--CK 100 100 000 - 0
244 Thermal_Throttle_St -O--CK 100 100 000 - 0
245 Timed_Workld_Media_Wear -O--CK 100 100 000 - 65535
246 Timed_Workld_RdWr_Ratio -O--CK 100 100 000 - 65535
247 Timed_Workld_Timer -O--CK 100 100 000 - 65535
251 NAND_Writes -O--CK 100 100 000 - 36119744
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 1 Comprehensive SMART error log
0x03 GPL R/O 1 Ext. Comprehensive SMART error log
0x04 GPL,SL R/O 8 Device Statistics log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 1 Extended self-test log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 NCQ Command Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x12 GPL R/O 1 SATA NCQ Non-Data log
0x13 GPL R/O 1 SATA NCQ Send and Receive log
0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xa5 SL VS 16 Device vendor specific log
0xce SL VS 16 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (1 sectors)
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
256 0 65535 Read_scanning was never started
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 3
SCT Version (vendor specific): 256 (0x0100)
Device State: Active (0)
Current Temperature: 42 Celsius
Power Cycle Min/Max Temperature: 40/42 Celsius
Lifetime Min/Max Temperature: 26/42 Celsius
Specified Max Operating Temperature: 70 Celsius
Under/Over Temperature Limit Count: 0/0
SMART Status: 0xc24f (PASSED)
SCT Temperature History Version: 2
Temperature Sampling Period: 10 minutes
Temperature Logging Interval: 10 minutes
Min/Max recommended Temperature: 0/70 Celsius
Min/Max Temperature Limit: 0/70 Celsius
Temperature History Size (Index): 128 (11)
Index Estimated Time Temperature Celsius
12 2023-06-15 10:50 ? -
... ..(114 skipped). .. -
127 2023-06-16 06:00 ? -
0 2023-06-16 06:10 31 ************
1 2023-06-16 06:20 ? -
2 2023-06-16 06:30 ? -
3 2023-06-16 06:40 ? -
4 2023-06-16 06:50 38 *******************
5 2023-06-16 07:00 39 ********************
6 2023-06-16 07:10 39 ********************
7 2023-06-16 07:20 39 ********************
8 2023-06-16 07:30 ? -
9 2023-06-16 07:40 ? -
10 2023-06-16 07:50 40 *********************
11 2023-06-16 08:00 ? -
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP Log 0x04)
Page Offset Size Value Flags Description
0x01 ===== = = === == General Statistics (rev 1) ==
0x01 0x008 4 6 --- Lifetime Power-On Resets
0x01 0x010 4 1 --- Power-on Hours
0x01 0x018 6 36102805 --- Logical Sectors Written
0x01 0x020 6 106696 --- Number of Write Commands
0x01 0x028 6 2187931 --- Logical Sectors Read
0x01 0x030 6 34177 --- Number of Read Commands
0x01 0x038 6 435000 --- Date and Time TimeStamp
0x04 ===== = = === == General Errors Statistics (rev 1) ==
0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
0x04 0x010 4 0 --- Resets Between Cmd Acceptance and Completion
0x05 ===== = = === == Temperature Statistics (rev 1) ==
0x05 0x008 1 42 --- Current Temperature
0x05 0x020 1 42 --- Highest Temperature
0x05 0x028 1 26 --- Lowest Temperature
0x05 0x058 1 70 --- Specified Maximum Operating Temperature
0x06 ===== = = === == Transport Statistics (rev 1) ==
0x06 0x008 4 30 --- Number of Hardware Resets
0x06 0x010 4 0 --- Number of ASR Events
0x06 0x018 4 0 --- Number of Interface CRC Errors
0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
0x07 0x008 1 0 N-- Percentage Used Endurance Indicator
|||_ C monitored condition met
||__ D supports DSN
|___ N normalized value
Pending Defects log (GP Log 0x0c) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 2 0 Command failed due to ICRC error
0x0002 2 0 R_ERR response for data FIS
0x0003 2 0 R_ERR response for device-to-host data FIS
0x0004 2 0 R_ERR response for host-to-device data FIS
0x0005 2 0 R_ERR response for non-data FIS
0x0006 2 0 R_ERR response for device-to-host non-data FIS
0x0007 2 0 R_ERR response for host-to-device non-data FIS
0x0008 2 0 Device-to-host non-data FIS retries
0x0009 2 2 Transition from drive PhyRdy to drive PhyNRdy
0x000a 2 1 Device-to-host register FISes sent due to a COMRESET
0x000b 2 0 CRC errors within host-to-device FIS
0x000d 2 0 Non-CRC errors within host-to-device FIS
0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
hdparm
Ausgabe von hdparm -I:
/dev/sda:
ATA device, with non-removable media
Model Number: SAMSUNG MZ7L3240HCHQ-00A07
Serial Number: S663NA0T805646
Firmware Revision: JXTC304Q
Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0
Standards:
Used: unknown (minor revision code 0x005e)
Supported: 11 10 9 8 7 6 5
Likely used: 11
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 468862128
Logical Sector size: 512 bytes
Physical Sector size: 4096 bytes
Logical Sector-0 offset: 0 bytes
device size with M = 1024*1024: 228936 MBytes
device size with M = 1000*1000: 240057 MBytes (240 GB)
cache/buffer size = unknown
Form Factor: 2.5 inch
Nominal Media Rotation Rate: Solid State Device
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
SET_MAX security extension
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* WRITE_{DMA|MULTIPLE}_FUA_EXT
* 64-bit World wide name
Write-Read-Verify feature set
* WRITE_UNCORRECTABLE_EXT command
* {READ,WRITE}_DMA_EXT_GPL commands
* Segmented DOWNLOAD_MICROCODE
* Gen1 signaling speed (1.5Gb/s)
* Gen2 signaling speed (3.0Gb/s)
* Gen3 signaling speed (6.0Gb/s)
* Native Command Queueing (NCQ)
* Phy event counters
* READ_LOG_DMA_EXT equivalent to READ_LOG_EXT
* DMA Setup Auto-Activate optimization
* Asynchronous notification (eg. media change)
* Software settings preservation
unknown 78[12]
* SMART Command Transport (SCT) feature set
* SCT Write Same (AC2)
* SCT Error Recovery Control (AC3)
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
* SANITIZE_ANTIFREEZE_LOCK_EXT command
* SANITIZE feature set
* CRYPTO_SCRAMBLE_EXT command
* BLOCK_ERASE_EXT command
* Device encrypts all user data
* DOWNLOAD MICROCODE DMA command
* SET MAX SETPASSWORD/UNLOCK DMA commands
* WRITE BUFFER DMA command
* READ BUFFER DMA command
* Data Set Management TRIM supported (limit 8 blocks)
* Deterministic read ZEROs after TRIM
Security:
Master password revision code = 65534
supported
not enabled
not locked
frozen
not expired: security count
supported: enhanced erase
32min for SECURITY ERASE UNIT. 32min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 5002538f02818a53
NAA : 5
IEEE OUI : 002538
Unique ID : f02818a53
Checksum: correct
Weitere Informationen
- Samsung SATA SSD PM893/PM897 (samsungsemiconductor-us.com)
 |
Autor: Werner Fischer Werner Fischer arbeitet im Product Management Team von Thomas-Krenn. Er evaluiert dabei neueste Technologien und teilt sein Wissen in Fachartikeln, bei Konferenzen und im Thomas-Krenn Wiki. Bereits 2005 - ein Jahr nach seinem Abschluss des Studiums zu Computer- und Mediensicherheit an der FH Hagenberg - heuerte er beim bayerischen Server-Hersteller an. Als Öffi-Fan nutzt er gerne Bus & Bahn und genießt seinen morgendlichen Spaziergang ins Büro.
|
Das könnte Sie auch interessieren
Samsung PM1643a SAS SSDs
Samsung PM897 SATA SSDs
Samsung SM883 SATA SSDs
