Intel DC S3510 Series SSDs

Aus Thomas-Krenn-Wiki
Zur Navigation springen Zur Suche springen
Hinweis: Bitte beachten Sie, dass dieser Artikel / diese Kategorie sich entweder auf ältere Software/Hardware Komponenten bezieht oder aus sonstigen Gründen nicht mehr gewartet wird.
Diese Seite wird nicht mehr aktualisiert und ist rein zu Referenzzwecken noch hier im Archiv abrufbar.

Dieser Artikel enthält Detail-Informationen zu Intel DC S3510 Series SSDs. Einen Überblick über alle Intel SSD Serien zeigt der Artikel Intel SSDs im Überblick.

IOPS Diagramm aus Intel DC S3510 TKperf Testreport (PDF)
Intel DC S3510 80 GB Modell
Intel DC S3510 80 GB Modell
(Board Oberseite)
Intel DC S3510 80 GB Modell
(Board Unterseite)

Allgemeine Informationen

TKperf Testreport

Intel DC S3510 TKperf Testreport

Modelle

SSD Kapazität
(netto) 		Kapazität
(brutto) 		Spare Area
(GB und % zus.
zur Netto-Kap.) 		Flash-Chips Haltbarkeit
(Endurance) 		Durchsatz
(max. Bandbreite) 		IOPS
(max. Random IOPS Performance)
Lesen Schreiben Lesen Schreiben
(über erste
8 GiB) 		Schreiben
(über ges.
Datenbereich)
SSDSC2BB080G601 80 GB
(80026361856 Byte) 		unbek. unbek. unbek. 45 TB 375 MB/s 110 MB/s 68.000 IOPS n/a 8.400 IOPS
SSDSC2BB120G601 120 GB
(120034123776 Byte) 		unbek. unbek. unbek. 70 TB 475 MB/s 135 MB/s 68.000 IOPS n/a 5.300 IOPS
SSDSC2BB240G601 240 GB
(240057409536 Byte) 		unbek. unbek. unbek. 140 TB 500 MB/s 260 MB/s 68.000 IOPS n/a 10.200 IOPS
SSDSC2BB480G601 480 GB
(480103981056 Byte) 		unbek. unbek. unbek. 275 TB 500 MB/s 440 MB/s 68.000 IOPS n/a 15.100 IOPS
SSDSC2BB800G601 800 GB
(800166076416 Byte) 		unbek. unbek. unbek. 450 TB 500 MB/s 460 MB/s 67.000 IOPS n/a 15.300 IOPS
SSDSC2BB012T601 1200 GB
(1200243695616 Byte) 		unbek. unbek. unbek. 660 TB 500 MB/s 440 MB/s 67.000 IOPS n/a 20.000 IOPS
SSDSC2BB016T601 1600 GB
(1600321314816 Byte) 		unbek. unbek. unbek. 880 TB 500 MB/s 430 MB/s 65.000 IOPS n/a 15.200 IOPS

Testberichte

Firmware

Date Revision Description
March 2016 G2010150 Information from Intel Solid-State Drive Data Center Tool 3.0.2 Release Notes:[1] The following changes are included in this firmware update:
  • Fixed SATA CRC errors seen when running at 3Gbps
  • Corrected SMART 05h behavior
  • Fixed power consumption on Staggered Spin-up

This latest firmware also includes a fix for a specific use condition where in certain cases if the device receives a command that violates the SATA protocol specification, the drive may ASSERT or stop responding to host commands (See Intel Advisory INTEL-SA-00050).

August 2015 G2010140 Information from Intel Solid-State Drive Data Center Tool 2.3.1 Release Notes:[2] This firmware revision has several continuous improvement optimizations intended to provide the best possible user experience with the Intel SSD. The following issues are also fixed in this release:
  • Added support for SMART Attribute F3h
  • Modification to Secure Erase to include NAND Erase
  • Improvements to the Maximum Latency for all Sequential and Random Write workloads
  • Added a fourth PHY mode setting to accommodate long interconnects (> 8-inches)

Additional: Fix for "READ/WRITE FPDMA QUEUED" ATA commands or "SCSI Task Abort".[3] Siehe dazu auch Syslog meldet task abort bei Intel SSDs.

- G2010130 Firmware of sample devices. (seen on a 80 GB sample SSD)

Quelle: Firmware Release Notes oder Auslesen von SSD-Informationen.

Programmausgaben

smartctl

Hinweis: Die Intel DC S3510 Serie ist noch nicht in der smartctl database enthalten. 

smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-49-generic] (local build)
Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Device Model:     INTEL SSDSC2BB080G6
Serial Number:    BTWA5175089N080BGN
LU WWN Device Id: 5 5cd2e4 04c0012b0
Firmware Version: G2010130
User Capacity:    80,026,361,856 bytes [80.0 GB]
Sector Sizes:     512 bytes logical, 4096 bytes physical
Rotation Rate:    Solid State Device
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   ACS-2 T13/2015-D revision 3
SATA Version is:  SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Mon Jul 27 15:12:03 2015 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (    0) seconds.
Offline data collection
capabilities:                    (0x79) SMART execute Offline immediate.
                                        No Auto Offline data collection support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   1) minutes.
Extended self-test routine
recommended polling time:        (   2) minutes.
Conveyance self-test routine
recommended polling time:        (   2) minutes.
SCT capabilities:              (0x003d) SCT Status supported.
                                        SCT Error Recovery Control supported.
                                        SCT Feature Control supported.
                                        SCT Data Table supported.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  5 Reallocated_Sector_Ct   0x0032   100   100   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       2
170 Unknown_Attribute       0x0033   100   100   010    Pre-fail  Always       -       0
171 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0
172 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0
174 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       1
175 Program_Fail_Count_Chip 0x0033   100   100   010    Pre-fail  Always       -       4295432578
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age   Always       -       0
184 End-to-End_Error        0x0033   100   100   090    Pre-fail  Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age   Always       -       0
190 Airflow_Temperature_Cel 0x0022   070   070   000    Old_age   Always       -       30 (Min/Max 26/30)
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       1
194 Temperature_Celsius     0x0022   100   100   000    Old_age   Always       -       30
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
199 UDMA_CRC_Error_Count    0x003e   100   100   000    Old_age   Always       -       0
225 Unknown_SSD_Attribute   0x0032   100   100   000    Old_age   Always       -       0
226 Unknown_SSD_Attribute   0x0032   100   100   000    Old_age   Always       -       65535
227 Unknown_SSD_Attribute   0x0032   100   100   000    Old_age   Always       -       65535
228 Power-off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       65535
232 Available_Reservd_Space 0x0033   100   100   010    Pre-fail  Always       -       0
233 Media_Wearout_Indicator 0x0032   100   100   000    Old_age   Always       -       0
234 Unknown_Attribute       0x0032   100   100   000    Old_age   Always       -       0
241 Total_LBAs_Written      0x0032   100   100   000    Old_age   Always       -       0
242 Total_LBAs_Read         0x0032   100   100   000    Old_age   Always       -       0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

hdparm

/dev/sdb:

ATA device, with non-removable media
        Model Number:       INTEL SSDSC2BB080G6
        Serial Number:      BTWA5175089N080BGN
        Firmware Revision:  G2010130
        Media Serial Num:
        Media Manufacturer:
        Transport:          Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6
Standards:
        Used: unknown (minor revision code 0x0110)
        Supported: 9 8 7 6 5
        Likely used: 9
Configuration:
        Logical         max     current
        cylinders       16383   16383
        heads           16      16
        sectors/track   63      63
        --
        CHS current addressable sectors:   16514064
        LBA    user addressable sectors:  156301488
        LBA48  user addressable sectors:  156301488
        Logical  Sector size:                   512 bytes
        Physical Sector size:                  4096 bytes
        Logical Sector-0 offset:                  0 bytes
        device size with M = 1024*1024:       76319 MBytes
        device size with M = 1000*1000:       80026 MBytes (80 GB)
        cache/buffer size  = unknown
        Form Factor: 2.5 inch
        Nominal Media Rotation Rate: Solid State Device
Capabilities:
        LBA, IORDY(can be disabled)
        Queue depth: 32
        Standby timer values: spec'd by Standard, no device specific minimum
        R/W multiple sector transfer: Max = 1   Current = 1
        DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
             Cycle time: min=120ns recommended=120ns
        PIO: pio0 pio1 pio2 pio3 pio4
             Cycle time: no flow control=120ns  IORDY flow control=120ns
Commands/features:
        Enabled Supported:
           *    SMART feature set
                Security Mode feature set
           *    Power Management feature set
           *    Write cache
           *    Look-ahead
           *    Host Protected Area feature set
           *    WRITE_BUFFER command
           *    READ_BUFFER command
           *    NOP cmd
           *    DOWNLOAD_MICROCODE
                SET_MAX security extension
           *    48-bit Address feature set
           *    Mandatory FLUSH_CACHE
           *    FLUSH_CACHE_EXT
           *    SMART error logging
           *    SMART self-test
           *    General Purpose Logging feature set
           *    WRITE_{DMA|MULTIPLE}_FUA_EXT
           *    64-bit World wide name
           *    IDLE_IMMEDIATE with UNLOAD
           *    WRITE_UNCORRECTABLE_EXT command
           *    {READ,WRITE}_DMA_EXT_GPL commands
           *    Segmented DOWNLOAD_MICROCODE
                unknown 119[6]
           *    Gen1 signaling speed (1.5Gb/s)
           *    Gen2 signaling speed (3.0Gb/s)
           *    Gen3 signaling speed (6.0Gb/s)
           *    Native Command Queueing (NCQ)
           *    Phy event counters
           *    READ_LOG_DMA_EXT equivalent to READ_LOG_EXT
           *    Software settings preservation
           *    SMART Command Transport (SCT) feature set
           *    SCT Write Same (AC2)
           *    SCT Error Recovery Control (AC3)
           *    SCT Features Control (AC4)
           *    SCT Data Tables (AC5)
           *    reserved 69[4]
           *    Data Set Management TRIM supported (limit 4 blocks)
           *    Deterministic read ZEROs after TRIM
Security:
        Master password revision code = 65534
                supported
        not     enabled
        not     locked
        not     frozen
        not     expired: security count
                supported: enhanced erase
        4min for SECURITY ERASE UNIT. 4min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 55cd2e404c0012b0
        NAA             : 5
        IEEE OUI        : 5cd2e4
        Unique ID       : 04c0012b0
Checksum: correct

Einzelnachweise

  1. ↑ Intel Solid State Drive Data Center Tool Release Notes - August 2016 - Version 3.0.2 (downloadmirror.intel.com)
  2. ↑ Intel Solid State Drive Data Center Tool Release Notes - November 2015 - Version 2.3.1 (downloadmirror.intel.com)
  3. ↑ S3610 SSDs have failed "READ/WRITE FPDMA QUEUED" ATA commands, frozen, then link reset (communities.intel.com)

Autor: Thomas Niedermeier

Thomas Niedermeier arbeitet im Product Management Team von Thomas-Krenn. Er absolvierte an der Hochschule Deggendorf sein Studium zum Bachelor Wirtschaftsinformatik. Seit 2013 ist Thomas bei Thomas-Krenn beschäftigt und kümmert sich unter anderem um OPNsense Firewalls, das Thomas-Krenn-Wiki und Firmware Sicherheitsupdates.

 

Das könnte Sie auch interessieren

Intel 710 Series SSDs
Zum Artikel
Intel D3-S4510 SSDs und D3-S4610 SSDs Firmware Update XCV10110
Zum Artikel
Intel X25-M G2 Postville SSDs
Zum Artikel