Using Tandberg Autoloader with Adaptec ASC-1045 HBA with Linux

From Thomas-Krenn-Wiki
Jump to: navigation, search

The Adaptec SAS HBA ASC-1045 is supported by Linux core until 2.6.33.

The corresponding core can be found here:

http://kernel.ubuntu.com/~kernel-ppa/mainline/v2.6.33/

On Ubuntu, the core can be installed using the command:

dpkg -i <paketnamen> 

The HBA and the loader will be immediately recognized. Then the card and the tape device will be detected.

Related articles

Firmware Update of LSI 9xxx HBAs on H8 / X9-motherboards
LSI 6Gb/s SATA+SAS PCIe 3.0 HBAs
ISCSI Basics