Fix X9SCM-F BIOS update failure Error when sending Enable Message to ME
Jump to navigation
Jump to search
Please note that this article / this category refers either on older software / hardware components or is no longer maintained for other reasons. This page is no longer updated and is purely for reference purposes still here in the archive available. |
---|
Updating the BIOS of Supermicro X9SCM-F Motherboards may fail with the errormessage Error when sending Enable Message to ME. The error may happen on motherboards which have been shipped by Supermicro with a BIOS version of 1.*. This issue can be fixed by applying a BIOS update, which contains a patch for this error. The patch must be applied only once, future BIOS updates do not need to contain this patch.
Problem
Updating the BIOS of a Supermicro X9SCM-F Motherboard ends with the following message:
- Error when sending Enable Message to ME !!
Solution
Install another BIOS update to BIOS version 2.0a and use the following BIOS image, which contains a patch to fix this error:
Updating the ME works with this BIOS image:
Screenshots
The following screenshots show the individual steps of the BIOS update:
Related articles
BIOS Settings