Dream server incl.
Windows Server 2022 Essentials
Rack system, tower or microserver? You decide!
Highlights at a glance:
|
|
Water cooling | |
Water inlet temperature | up to 53 °C |
ASHRAE class | Water cooling: W5 (>45 °C, local waste heat utilization) Air cooling: A1 (15-32 °C, 8-80%) |
Temperature difference | 10 K |
Volume flow | 0.3l/min |
Environmental conditions | 20-22 °C, max. 40% Luftfeuchte |
Water quality | |
pH value | 7...9 |
Corrosion | Inhibitors necessary |
Sulfides | <10 ppm |
Sulphate | <100 ppm |
Chloride | <50 ppm |
Bacteria | <1000 CFUs/mL (Colony Forming Unit) |
Water hardness (calcium carbonate) | <200 ppm |
Evaporation residues | <500 ppm |
Turbidity | <20 NTU (Nephelometric Turbidity Unit) |
Mainboards | |
Manufacturer | Supermicro |
Mainboards | Supermicro X11DPi-NT |
Chipset | Intel C622 |
Socket | Intel LGA 3647-0 |
Processor | Intel Xeon Scalable 2nd Gen (Cascade Lake) |
Main Memory | bis zu 1 TB DDR4 2400/2666 RDIMM (16 DIMMs) |
LAN Onboard | 2x 10 Gbit/s LAN (RJ-45) |
LAN chipset | Intel X557 |
LAN Onboard (dedicated IPMI) | 1x RJ45 Dedicated IPMI LAN port |
Onboard graphic | 1x VGA Aspeed AST2500 BMC |
Onboard Input/Output | USB (no PS2 ports!) 1x TPM Header 2x COM Ports (1 rear, 1 header) |
USB-ports | 1x USB on board (type A) 4x USB (rear) |
Onboard ports | |
SATA-3 (6 Gb/s) | 14x SATA-3 (6 Gbit/s) Intel C622 RAID 0, 1, 10, 5, Software-Raid 8x Intel PCH 4x Intel SCU 2x SuperDOM support |
SATA-3 port distribution | 8x Intel PCH 4x Intel SCU 2x SuperDOM support |
M.2 | 1 x M.2 PCIe 3.0 x4 |
M.2 form factor | 2260, 2280, 22110 |
Extension-slots for additional cards | |
PCI slots (mainboard) | 4 x PCIe 3.0 x16 2 x PCIe 3.0 x8 |
Available slots in the chassis | 6 Low profile, Half Length, Full Length |
Storage capacity | |
Possible number of HDDs | 8x 3.5" / 2.5" (Hot-swap) |
Backplane | SATA / SAS-3 (12 Gb/s) |
Max. capacity SAS | 61.44 TB |
Max. capacity SATA | 61.44 TB |
Maximum capacity SSD | 61.44 TB |
Maximum capacity M.2 | 3.84 TB |
Server management | |
Management software | Supermicro SuperDoctor 5 |
Remote management | Integrated IPMI (dedicated NIC) |
Features | Managementsoftware IPMI View IPMI with KVM Over LAN Serial Over LAN (SOL) Virtual Media Over LAN (Virtual USB Floppy/CD and Drive Redirection) LAN Alert-SNMP Trap Event Log OS Independent Hardware Health Monitor Remote Power Control Support RMCP & RMCP + Protocols Fan Speed Control Dedicated 3. network interface card |
IPMI-sensors | CPU-temperature (OK / warning) system-temperature (Celsius degree) Electronic voltage (volt) Cooler speed (RPM) Additional model-dependent sensors (www.thomas-krenn.com/ipmi-sensoren) |
Chassis | |
Unit | 2U |
Dimensions | 89 mm (H), 437 mm (W), 647 mm (D) |
drives (in scope of delivery) | not contained, optional available |
Drives (optional) | 1x Slim CD/DVD/DVD-R External USB-drives |
Fan (center) | 3x 80x80x38mm Hot-swap (9400rpm, 53.5dBA) |
Silent blowerkit option | no |
Power supply | |
Power supply unit | 2x 800 Watt redundantes Hot Swap Netzteil (80plus Titanium) |
energy efficiency | 96% |
PMBus support | Yes, Ver.1.2 |
Rack Assembly | |
Assembly rails | contained in the scope of supply |
rail length | 675-880 mm |
Total length server front to end of assembly rail | 820 mm |
Max. extraction length | 670 mm |
Recommended maneuvering space | 75 mm (minimum) |
environment-requirements | |
Recommended environment-temperature (appropriate BSI) | 20 - 22 degree |
Recommended air humidity (appropriate BSI) | max. 40% |