Data sheet (PDF) Data sheet (PDF)

Datasheet

Tower server Intel single-CPU TI1504-CHXS

[Ver. 2.0]
Highlights at a glance:
  • Incl. Intel Xeon Bronze 3480U, can be expanded to up to 1x CPUs (8 - 56 cores)
  • Incl. 16 GB RAM, upgradable to 512GB RAM, (8 DIMMs)
  • 4x 3.5" / 2.5" (Optional hot-swap) up to , SSDs: 30.72 TB
  • Expandable with 5 FP/LP/ FL add-on card(s), 2x PCIe 5.0 x16 3x PCIe 5.0 x8
  • Energy-efficient power supply 80 PLUS Gold (>87%) red. NT (opt.)
  • 2x 10Gbit/s LAN (RJ45)
  • Integrated IPMI (dedicated NIC)
Mainboards
Manufacturer Supermicro
Mainboards Supermicro X13SEI-TF
Chipset Intel C741
Socket Intel LGA 4677
Processor Intel Xeon Scalable 4th Gen (Sapphire Rapids)
Main Memory 8 DIMMs
512 GB DDR5 4800/4400 RDIMM
LAN Onboard 2x 10 Gbit/s LAN (RJ-45)
LAN chipset Intel X550
Onboard graphic 1x VGA ASPEED AST2600 BMC 2 GB
Onboard graphics maximum resolution 1920x1200@60Hz
Additional card (optional) PNY NVIDIA Quadro T1000 (4GB)
USB ports 4x USB (rear) (2x USB 3.2 Gen1 2x USB 2.0)

1x USB on board (type A)
Extension-slots for additional cards
Available slots in the chassis 5x Full profile/Low profile/Full Length
Onboard ports
SATA-3 (6 Gb/s) 10x SATA-3 (6 Gbit/s)

M.2 2 x M.2 PCIe 5.0 x4
M.2 form factor 2280, 22110
Drives / storage capacity
Drive slots (total) 4x 3.5" / 2.5" (Optional hot-swap)


Backplane SATA / SAS-3 (12 Gb/s)
Max. capacity HDD (SATA) 88 TB
Max. capacity SSD (SATA) 30.72 TB
Server management
Management software Supermicro SuperDoctor 5
Remote management Integrated IPMI (dedicated NIC)
IPMI-sensors Additional model-dependent sensors (www.thomas-krenn.com/ipmi-sensoren)
Chassis
Unit 5U
Dimensions 425 mm (H), 198 mm (W), 553 mm (D),
588 mm (D) (incl. front panel)
drives (in scope of delivery) not contained, optional available
Drives (optional) 3x 5,25'' Laufwerk
External USB-drives
Silent blowerkit option optionally available
IP protection classes The housing front meets the requirements of protection class IP40
Front USB ports 2
Power supply
Power supply unit 750 Watt Silent Netzteil (80plus Gold)
energy efficiency 90%
Rack Assembly
Assembly rails 19" conversion-kit possible, optional available
rail length 770 - 950 mm
Total length server front to end of assembly rail 800 mm
Max. extraction length 685 mm
Recommended maneuvering space 75 mm (minimum)
environment-requirements
Recommended ambient temperature 20 - 22 degree
Recommended humidity max. 40%
Recommended deployment location Thanks to its design and low noise output (with optional silent kit), the system is optimally equipped for use in the office. With the 19” rack assembly conversion kit, the server can also be installed in a rack.