Data sheet (PDF) Data sheet (PDF)

Datasheet

Tower server AMD single-CPU TA1506-INEPN

[Ver. 1.1]
Highlights at a glance:
  • Incl. 1x AMD EPYC 7252, can be equipped with a CPU (AMD EPYC 7002/7003 (Rome/Milan)) up to 64 cores
  • Incl. 16 GB RAM, upgradable to 1TB RAM, (8 DIMMs)
  • 6x 3.5" / 2.5" (Hot-swap) up to 132 TB, SSDs: 76.8 TB
  • Expandable with 7 FP/ HL add-on card(s), 5x PCIe 4.0 x16 2x PCIe 4.0 x8
  • Integrated IPMI (dedicated NIC)
  • Conversion kit available (for use with a 19" rack).
Mainboards
Manufacturer Supermicro
Mainboards H12SSL-NT
Chipset AMD System on Chip
Socket AMD SP3
Processor AMD EPYC 7002/7003 (Rome/Milan)
Main Memory 8 DIMMs
1 TB DDR4 3200 RDIMM/SDRAM
LAN Onboard 2x 10 Gbit/s LAN (RJ-45)
LAN chipset Broadcom BCM57416
LAN Onboard (dedicated IPMI) 1
Onboard graphic 1x VGA Aspeed AST2500 BMC
Additional card (optional) PNY NVIDIA Quadro T1000 (4GB)
Onboard Input/Output USB (no PS2 ports!)
1x TPM 2.0 header
1x COM port (rear)
USB ports 4x USB (rear) (USB 3.0)

0x USB on board (type A)
Extension-slots for additional cards
PCI slots (mainboard) 5x PCIe 4.0 x16
2x PCIe 4.0 x8

Available slots in the chassis 7x Full profile/Half Length
Onboard ports
SATA-3 (6 Gb/s) 16x SATA-3 (6 Gbit/s) AMD SoC
No integrated RAID function
M.2 2 x M.2 PCIe 3.0 x4
M.2 form factor 2280, 22110
NVMe 4x NVMe onboard
Drives / storage capacity
Drive slots (total) 6x 3.5" / 2.5" (Hot-swap)
5x 2.5" (Internal, non-hot-swap)
52.5" (rear of chassis, hot-swap)
SAS / SATA slots 6x SAS / SATA
NVMe / SAS / SATA hybrid slots 4x NVMe / SAS / SATA (hybrid)
Backplane SATA / SAS-3 / NVMe (12 Gb/s)
Max. capacity HDD (SAS) 132 TB
Max. capacity HDD (SATA) 132 TB
Max. capacity SSD (SATA) 46.08 TB
Max. capacity SSD (SATA) 46.08 TB
Max. capacity SSD (U.2 NVMe) 61.44 TB
Server management
Management software Supermicro SuperDoctor 5
Remote management Integrated IPMI (dedicated NIC)
Features Managementsoftware IPMI View
IPMI with KVM Over LAN
Serial Over LAN (SOL)
Virtual Media Over LAN (Virtual USB Floppy/CD and Drive Redirection)
LAN Alert-SNMP Trap
Event Log
OS Independent
Hardware Health Monitor
Remote Power Control
Support RMCP & RMCP + Protocols
Fan Speed Control
Dedicated 3. network interface card
IPMI-sensors CPU-temperature (OK / warning)
system-temperature (Celsius degree)
Electronic voltage (volt)
Cooler speed (RPM)
Additional model-dependent sensors (www.thomas-krenn.com/ipmi-sensoren)
Chassis
Unit 5U
Dimensions 430 mm (H), 200 mm (W), 596 mm (D),
Drives (optional) External USB-drives
Front USB ports 2
Power supply
Power supply unit 850 Watt Silent Netzteil (80plus Gold)
energy efficiency 90%
Redundant power supply (selectable option) 2x 1200 W
Rack Assembly
Assembly rails 19" conversion-kit possible, optional available
environment-requirements
Recommended ambient temperature 20 - 22 degree
Recommended humidity max. 40%
Recommended deployment location Thanks to its design and low noise output (with optional silent kit), the system is optimally equipped for use in the office. With the 19” rack assembly conversion kit, the server can also be installed in a rack.