Data sheet (PDF) Data sheet (PDF)

Datasheet

2U AMD single-CPU RA1212-AIEPN server

[Ver. 2.1]
Highlights at a glance:
  • Incl. 1x AMD EPYC 9124, can be equipped with a CPU (AMD EPYC 9004 (Genoa)) up to 128 cores
  • Incl. 16 GB RAM, upgradable to 1.125TB RAM, (12 DIMMs)
  • 12x 3.5" / 2.5" drives (hot-swap) – SATA/SAS/NVMe depending on backplane selection
  • 2 x 2.5"(Rear, hot-swap)
  • Expandable with 5 LP/ HL add-on card(s), 3x PCIe 5.0 x16 2x PCIe 5.0 x8
  • Energy-efficient power supply 80 PLUS Titanium (>96%) red. NT
  • Integrated IPMI (dedicated NIC)
Mainboards
Manufacturer Supermicro
Mainboards H13SSL-NT
Chipset AMD System on Chip
Socket AMD SP5
Processor AMD EPYC 9004 (Genoa)
Main Memory 12 DIMMs
1.125 TB DDR5 4800 RDIMM
LAN Onboard 2x 10 Gbit/s LAN (RJ-45)
LAN chipset Broadcom BCM57416
LAN Onboard (dedicated IPMI) 1
Onboard graphic 1x VGA ASPEED AST2600 BMC
Additional card (optional) PNY NVIDIA Quadro T1000 (4GB)
Onboard Input/Output USB (no PS2 ports!)
1x TPM 2.0 header
1x COM Port (header)
USB ports 4x USB (rear) (USB 3.0)
(USB 3.0)
0x USB on board (type A)
Extension-slots for additional cards
Available slots in the chassis 5x
Onboard ports
SATA-3 (6 Gb/s) 8x SATA-3 (6 Gbit/s) AMD SoC
No integrated RAID function
M.2 2 x M.2 PCIe 3.0 x4, SATA
M.2 form factor 2280, 22110
NVMe 6x NVMe onboard
Drives / storage capacity
Drive slots (total) 12x 3.5" / 2.5" (Hot-swap)
2x 2.5" (Rear, hot-swap)
22.5" (rear of chassis, hot-swap)
Backplane SATA / SAS-3 / NVMe (12 Gb/s)
Max. capacity HDD (SAS) 264 TB
Max. capacity HDD (SATA) 264 TB
Max. capacity SSD (SATA) 92.16 TB
Max. capacity SSD (SATA) 92.16 TB
Max. capacity SSD (U.2 NVMe) 61.44 TB
Server management
Management software Supermicro SuperDoctor 5
Remote management Integrated IPMI (dedicated NIC)
Features Managementsoftware IPMI View
IPMI with KVM Over LAN
Serial Over LAN (SOL)
Virtual Media Over LAN (Virtual USB Floppy/CD and Drive Redirection)
LAN Alert-SNMP Trap
Event Log
OS Independent
Hardware Health Monitor
Remote Power Control
Support RMCP & RMCP + Protocols
Fan Speed Control
Dedicated 3. network interface card
IPMI-sensors CPU-temperature (OK / warning)
system-temperature (Celsius degree)
Electronic voltage (volt)
Cooler speed (RPM)
Additional model-dependent sensors (www.thomas-krenn.com/ipmi-sensoren)
Chassis
Unit 2U
Dimensions 88 mm (H), 430 mm (W), 680 mm (D),
drives (in scope of delivery) not contained, optional available
Drives (optional) External USB-drives
Fan (center) 3x 80x38mm Hot-swap (, )
Silent blowerkit option no
Front USB ports 1
Power supply
Power supply unit 2x 1300 Watt redundantes Hot Swap Netzteil (80 plus Titanium)
energy efficiency 96%
Rack Assembly
Assembly rails contained in the scope of supply
rail length 420 - 620 mm
Total length server front to end of assembly rail 630 mm
Max. extraction length 550 mm
environment-requirements
Recommended ambient temperature 20 - 22 degree
Recommended humidity max. 40%
Recommended deployment location To ensure the optimal cooling of the system, we recommend running the server in an air conditioned server room and as part of a rack installation. The server is not ideal for use in an office environment due to its high noise levels.