Intel DC P4610 Series SSDs

Aus Thomas-Krenn-Wiki
Zur Navigation springen Zur Suche springen

Dieser Artikel enthält Detail-Informationen zu den Intel DC P4610 Series SSDs. Einen Überblick über alle Intel SSD Serien zeigt der Artikel Intel SSDs im Überblick.

Intel SSD DC P4610 Series 1,6 TB Modell

Allgemeine Informationen

TKperf Testreport

Intel SSD DC P4610 Series TKperf Testreport

Modelle

SSD Kapazität
(netto)
Kapazität
(brutto)
Spare Area
(GB und % zus.
zur Netto-Kap.)
Flash-Chips Haltbarkeit
(Endurance)
Durchsatz
(max. Bandbreite)
IOPS
(max. Random IOPS Performance)
Lesen Schreiben Lesen Schreiben
(über erste
8 GiB)
Schreiben
(über ges.
Datenbereich)
SSDPE2KE016T801 1.6 TB
(1.600.321.314.816 Byte)
n/a GB n/a GB (n/a %) n/a 12,25 PBW 3200 MB/s 2100 MB/s 620000 IOPS n/a 200000 IOPS
SSDPE2KE032T801 3,2 TB
(n/a Byte)
n/a GB n/a GB (n/a %) n/a 21,85 PBW 3200 MB/s 3000 MB/s 640000 IOPS n/a 200000 IOPS
SSDPE2KE064T801 6,4 TB
(n/a Byte)
n/a GB n/a GB (n/a %) n/a 36,54 PBW 3000 MB/s 2900 MB/s 640000 IOPS n/a 220000 IOPS
SSDPE2KE076T801 7,68 TB
(n/a Byte)
n/a GB n/a GB (n/a %) n/a 44,25 PBW 3200 MB/s 3200 MB/s 640000 IOPS n/a 220000 IOPS

Testberichte

Firmware

Date Revision Description
November 2019 VDV10170 Information from Intel Solid-State Drive Data Center Tool 3.0.23 Release Notes:[1] The following changes are included in this firmware update:
  • Intel SSD DC P4510 & P4610; latest firmware version VDV10170
February 2019 VDV10152 Information from Intel Solid-State Drive Data Center Tool 3.0.19 Release Notes:[2] The following changes are included in this firmware update:
  • Support for P4610: 1.6TB, 3.2TB, 6.4TB, 7.68TB SKUs
June 2018 VDV10140 Information from Intel Solid-State Drive Data Center Tool 3.0.16 Release Notes: The following changes are included in this firmware update:
  • Support for P4610: 1.6TB, 3.2TB, 6.4TB, 7.68TB SKUs

Quelle: Firmware Release Notes oder Auslesen von SSD-Informationen.

Programmausgaben

smartctl

smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-38-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF INFORMATION SECTION ===
Model Number:                       INTEL SSDPE2KE016T8
Serial Number:                      BTLN8256019L1P6AGN
Firmware Version:                   VDV10140
PCI Vendor/Subsystem ID:            0x8086
IEEE OUI Identifier:                0x5cd2e4
Total NVM Capacity:                 1.600.321.314.816 [1,60 TB]
Unallocated NVM Capacity:           0
Controller ID:                      0
Number of Namespaces:               1
Namespace 1 Size/Capacity:          1.600.321.314.816 [1,60 TB]
Namespace 1 Formatted LBA Size:     512
Local Time is:                      Thu Oct 25 08:49:26 2018 CEST
Firmware Updates (0x02):            1 Slot
Optional Admin Commands (0x000e):   Format Frmw_DL NS_Mngmt
Optional NVM Commands (0x0006):     Wr_Unc DS_Mngmt
Maximum Data Transfer Size:         32 Pages
Warning  Comp. Temp. Threshold:     70 Celsius
Critical Comp. Temp. Threshold:     80 Celsius

Supported Power States
St Op     Max   Active     Idle   RL RT WL WT  Ent_Lat  Ex_Lat
 0 +    16.00W       -        -    0  0  0  0        0       0

Supported LBA Sizes (NSID 0x1)
Id Fmt  Data  Metadt  Rel_Perf
 0 +     512       0         2
 1 -    4096       0         0

=== START OF SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

SMART/Health Information (NVMe Log 0x02, NSID 0xffffffff)
Critical Warning:                   0x00
Temperature:                        40 Celsius
Available Spare:                    100%
Available Spare Threshold:          10%
Percentage Used:                    0%
Data Units Read:                    0
Data Units Written:                 0
Host Read Commands:                 72
Host Write Commands:                1
Controller Busy Time:               0
Power Cycles:                       6
Power On Hours:                     51
Unsafe Shutdowns:                   4
Media and Data Integrity Errors:    0
Error Information Log Entries:      0
Warning  Comp. Temperature Time:    0
Critical Comp. Temperature Time:    0

Error Information (NVMe Log 0x01, max 64 entries)
No Errors Logged

nvme-cli

Smart Log for NVME device:nvme1 namespace-id:ffffffff
critical_warning                    : 0
temperature                         : 40 C
available_spare                     : 100%
available_spare_threshold           : 10%
percentage_used                     : 0%
data_units_read                     : 0
data_units_written                  : 0
host_read_commands                  : 72
host_write_commands                 : 1
controller_busy_time                : 0
power_cycles                        : 6
power_on_hours                      : 28
unsafe_shutdowns                    : 4
media_errors                        : 0
num_err_log_entries                 : 0
Warning Temperature Time            : 0
Critical Composite Temperature Time : 0
Thermal Management T1 Trans Count   : 0
Thermal Management T2 Trans Count   : 0
Thermal Management T1 Total Time    : 0
Thermal Management T2 Total Time    : 0

Einzelnachweise


Foto Thomas Niedermeier.jpg

Autor: Thomas Niedermeier

Thomas Niedermeier arbeitet im Product Management Team von Thomas-Krenn. Er absolvierte an der Hochschule Deggendorf sein Studium zum Bachelor Wirtschaftsinformatik. Seit 2013 ist Thomas bei Thomas-Krenn beschäftigt und kümmert sich unter anderem um OPNsense Firewalls, das Thomas-Krenn-Wiki und Firmware Sicherheitsupdates.

Icon-Twitter.png 

Das könnte Sie auch interessieren

Intel Memory and Storage Tool
Intel P1600X Optane M.2 NVMe SSDs
SMART Attribute von Intel SSDs