wikiATP N600Sc M.2 NVMe SSDs mit PLP
Zur Navigation springen
Zur Suche springen
ATP N600Sc M.2 NMVe SSDs mit PLP bieten Kapazitäten von 120 GB bis 1,92 TB. Dank der integrierten hardware-basierten Power Loss Protection (PLP) sind sämtliche Daten selbst bei einem plötzlichen Stromausfall geschützt. Diese SSDs können in zahlreichen Thomas-Krenn-Servern eingesetzt werden - siehe M.2 und mSATA SSDs in Thomas-Krenn Servern.
Allgemeine Informationen
Modelle
| Endurance | Durchsatz | IOPS clean state | |||||
|---|---|---|---|---|---|---|---|
| Random
Write (0,4 DWPD) |
Sequential
Write (1,4 DWPD) |
Lesen | Schreiben | Lesen | Schreiben | ||
| AF120GSTJA-T24 /-T25 | 120 GB | 96 TBW | 320 TBW | 1.835 MB/s | 580 MB/s | 108 K | 117 K |
| AF240GSTJA-T24 /-T25 | 240 GB | 192 TBW | 640 TBW | 3.400 MB/s | 1.170 MB/s | 198 K | 138 K |
| AF480GSTJA-T24 /-T25 | 480 GB | 384 TBW | 1.280 TBW | 3.420 MB/s | 2.350 MB/s | 206 K | 165 K |
| AF960GSTJA-T24 /-T25 | 960 GB | 768 TBW | 2.560 TBW | 3.050 MB/s | 222 K | 176 K | |
| AF1T92STJA-T24 /-T25 | 1,92 TB | 1.536 TBW | 5.120 TBW | 225 K | 179 K | ||
Firmware Versionen
| Version | Beschreibung |
|---|---|
| 42A4SB6B | Firmware Version der -T24 Modelle (Modelljahr 2020) |
| 42A4SB6D | Firmware Version der -T25 Modelle (Modelljahr 2022) |
Programmausgaben
Die folgenden Programmausgaben stammen von einem Testsystem mit Ubuntu 23.04 mit Linux Kernel 6.2.
smartctl -x
ubuntu@ubuntu-23-04:~$ sudo smartctl -x /dev/nvme0 smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.2.0-20-generic] (local build) Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Number: ATP NVMe M.2 2280 SSD Serial Number: 21070369-000050 Firmware Version: 42A4SB6B PCI Vendor/Subsystem ID: 0x1db2 IEEE OUI Identifier: 0x141357 Controller ID: 1 NVMe Version: 1.3 Number of Namespaces: 1 Namespace 1 Size/Capacity: 240,057,409,536 [240 GB] Namespace 1 Utilization: 6,895,534,080 [6.89 GB] Namespace 1 Formatted LBA Size: 512 Namespace 1 IEEE EUI-64: 141357 71600053a3 Local Time is: Mon Oct 2 12:23:47 2023 UTC Firmware Updates (0x14): 2 Slots, no Reset required Optional Admin Commands (0x0017): Security Format Frmw_DL Self_Test Optional NVM Commands (0x005f): Comp Wr_Unc DS_Mngmt Wr_Zero Sav/Sel_Feat Timestmp Log Page Attributes (0x0b): S/H_per_NS Cmd_Eff_Lg Telmtry_Lg Maximum Data Transfer Size: 64 Pages Warning Comp. Temp. Threshold: 75 Celsius Critical Comp. Temp. Threshold: 80 Celsius Supported Power States St Op Max Active Idle RL RT WL WT Ent_Lat Ex_Lat 0 + 9.00W - - 0 0 0 0 0 0 1 + 4.60W - - 1 1 1 1 0 0 2 + 3.80W - - 2 2 2 2 0 0 3 - 0.0450W - - 3 3 3 3 2000 2000 4 - 0.0040W - - 4 4 4 4 15000 15000 Supported LBA Sizes (NSID 0x1) Id Fmt Data Metadt Rel_Perf 0 + 512 0 0 === START OF SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED SMART/Health Information (NVMe Log 0x02) Critical Warning: 0x00 Temperature: 45 Celsius Available Spare: 100% Available Spare Threshold: 10% Percentage Used: 0% Data Units Read: 43,340 [22.1 GB] Data Units Written: 97,867 [50.1 GB] Host Read Commands: 560,987 Host Write Commands: 1,141,482 Controller Busy Time: 23 Power Cycles: 32 Power On Hours: 15 Unsafe Shutdowns: 4 Media and Data Integrity Errors: 0 Error Information Log Entries: 0 Warning Comp. Temperature Time: 0 Critical Comp. Temperature Time: 0 Temperature Sensor 1: 46 Celsius Temperature Sensor 2: 45 Celsius Temperature Sensor 3: 53 Celsius Temperature Sensor 4: 45 Celsius Temperature Sensor 5: 45 Celsius Temperature Sensor 6: 38 Celsius Error Information (NVMe Log 0x01, 16 of 256 entries) No Errors Logged
nvme version
ubuntu@ubuntu-23-04:~$ sudo nvme version nvme version 2.3 (git 2.3) libnvme version 1.3 (git 1.3)
nvme list
ubuntu@ubuntu-23-04:~$ sudo nvme list -v /dev/nvme0 Subsystem Subsystem-NQN Controllers ---------------- ------------------------------------------------------------------------------------------------ ---------------- nvme-subsys1 nqn.2014.08.org.nvmexpress:1db21db222100143-000052 ATP NVMe M.2 2280 SSD nvme1 nvme-subsys0 nqn.2014.08.org.nvmexpress:1db21db221070369-000050 ATP NVMe M.2 2280 SSD nvme0 Device SN MN FR TxPort Address Subsystem Namespaces -------- -------------------- ---------------------------------------- -------- ------ -------------- ------------ ---------------- nvme1 22100143-000052 ATP NVMe M.2 2280 SSD V0714C0 pcie 0000:01:00.0 nvme-subsys1 nvme1n1 nvme0 21070369-000050 ATP NVMe M.2 2280 SSD 42A4SB6B pcie 0000:06:00.0 nvme-subsys0 nvme0n1 Device Generic NSID Usage Format Controllers ------------ ------------ -------- -------------------------- ---------------- ---------------- /dev/nvme1n1 /dev/ng1n1 1 120.03 GB / 120.03 GB 512 B + 0 B nvme1 /dev/nvme0n1 /dev/ng0n1 1 6.90 GB / 240.06 GB 512 B + 0 B nvme0
nvme id-ctrl -H
ubuntu@ubuntu-23-04:~$ sudo nvme id-ctrl -H /dev/nvme0
NVME Identify Controller:
vid : 0x1db2
ssvid : 0x1db2
sn : 21070369-000050
mn : ATP NVMe M.2 2280 SSD
fr : 42A4SB6B
rab : 6
ieee : 141357
cmic : 0
[3:3] : 0 ANA not supported
[2:2] : 0 PCI
[1:1] : 0 Single Controller
[0:0] : 0 Single Port
mdts : 6
cntlid : 0x1
ver : 0x10300
rtd3r : 0x7a120
rtd3e : 0x1e8480
oaes : 0x200
[31:31] : 0 Discovery Log Change Notice Not Supported
[27:27] : 0 Zone Descriptor Changed Notices Not Supported
[15:15] : 0 Normal NSS Shutdown Event Not Supported
[14:14] : 0 Endurance Group Event Aggregate Log Page Change Notice Not Supported
[13:13] : 0 LBA Status Information Notices Not Supported
[12:12] : 0 Predictable Latency Event Aggregate Log Change Notices Not Supported
[11:11] : 0 Asymmetric Namespace Access Change Notices Not Supported
[9:9] : 0x1 Firmware Activation Notices Supported
[8:8] : 0 Namespace Attribute Changed Event Not Supported
ctratt : 0
[19:19] : 0 Flexible Data Placement Not Supported
[15:15] : 0 Extended LBA Formats Not Supported
[14:14] : 0 Delete NVM Set Not Supported
[13:13] : 0 Delete Endurance Group Not Supported
[12:12] : 0 Variable Capacity Management Not Supported
[11:11] : 0 Fixed Capacity Management Not Supported
[10:10] : 0 Multi Domain Subsystem Not Supported
[9:9] : 0 UUID List Not Supported
[8:8] : 0 SQ Associations Not Supported
[7:7] : 0 Namespace Granularity Not Supported
[6:6] : 0 Traffic Based Keep Alive Not Supported
[5:5] : 0 Predictable Latency Mode Not Supported
[4:4] : 0 Endurance Groups Not Supported
[3:3] : 0 Read Recovery Levels Not Supported
[2:2] : 0 NVM Sets Not Supported
[1:1] : 0 Non-Operational Power State Permissive Not Supported
[0:0] : 0 128-bit Host Identifier Not Supported
rrls : 0
cntrltype : 0
[7:2] : 0 Reserved
[1:0] : 0 Controller type not reported
fguid : 00000000-0000-0000-0000-000000000000
crdt1 : 0
crdt2 : 0
crdt3 : 0
nvmsr : 0
[1:1] : 0 NVM subsystem Not part of an Enclosure
[0:0] : 0 NVM subsystem Not part of an Storage Device
vwci : 0
[7:7] : 0 VPD Write Cycles Remaining field is Not valid.
[6:0] : 0 VPD Write Cycles Remaining
mec : 0
[1:1] : 0 NVM subsystem Not contains a Management Endpoint on a PCIe port
[0:0] : 0 NVM subsystem Not contains a Management Endpoint on an SMBus/I2C port
oacs : 0x17
[10:10] : 0 Lockdown Command and Feature Not Supported
[9:9] : 0 Get LBA Status Capability Not Supported
[8:8] : 0 Doorbell Buffer Config Not Supported
[7:7] : 0 Virtualization Management Not Supported
[6:6] : 0 NVMe-MI Send and Receive Not Supported
[5:5] : 0 Directives Not Supported
[4:4] : 0x1 Device Self-test Supported
[3:3] : 0 NS Management and Attachment Not Supported
[2:2] : 0x1 FW Commit and Download Supported
[1:1] : 0x1 Format NVM Supported
[0:0] : 0x1 Security Send and Receive Supported
acl : 4
aerl : 7
frmw : 0x14
[5:5] : 0 Multiple FW or Boot Update Detection Not Supported
[4:4] : 0x1 Firmware Activate Without Reset Supported
[3:1] : 0x2 Number of Firmware Slots
[0:0] : 0 Firmware Slot 1 Read/Write
lpa : 0xb
[6:6] : 0 Telemetry Log Data Area 4 Not Supported
[5:5] : 0 LID 0x0, Scope of each command in LID 0x5, 0x12, 0x13 Not Supported
[4:4] : 0 Persistent Event log Not Supported
[3:3] : 0x1 Telemetry host/controller initiated log page Supported
[2:2] : 0 Extended data for Get Log Page Not Supported
[1:1] : 0x1 Command Effects Log Page Supported
[0:0] : 0x1 SMART/Health Log Page per NS Supported
elpe : 255
[7:0] : 255 (0's based) Error Log Page Entries (ELPE)
npss : 4
[7:0] : 4 (0's based) Number of Power States Support (NPSS)
avscc : 0
[0:0] : 0 Admin Vendor Specific Commands uses Vendor Specific Format
apsta : 0x1
[0:0] : 0x1 Autonomous Power State Transitions Supported
wctemp : 348
[15:0] : 75°C (348 Kelvin) Warning Composite Temperature Threshold (WCTEMP)
cctemp : 353
[15:0] : 80°C (353 Kelvin) Critical Composite Temperature Threshold (CCTEMP)
mtfa : 50
hmpre : 0
hmmin : 0
tnvmcap : 0
[127:0] : 0
Total NVM Capacity (TNVMCAP)
unvmcap : 0
[127:0] : 0
Unallocated NVM Capacity (UNVMCAP)
rpmbs : 0
[31:24]: 0 Access Size
[23:16]: 0 Total Size
[5:3] : 0 Authentication Method
[2:0] : 0 Number of RPMB Units
edstt : 5
dsto : 1
fwug : 0
kas : 0
hctma : 0x1
[0:0] : 0x1 Host Controlled Thermal Management Supported
mntmt : 303
[15:0] : 30°C (303 Kelvin) Minimum Thermal Management Temperature (MNTMT)
mxtmt : 348
[15:0] : 75°C (348 Kelvin) Maximum Thermal Management Temperature (MXTMT)
sanicap : 0x2
[31:30] : 0 Additional media modification after sanitize operation completes successfully is not defined
[29:29] : 0 No-Deallocate After Sanitize bit in Sanitize command Supported
[2:2] : 0 Overwrite Sanitize Operation Not Supported
[1:1] : 0x1 Block Erase Sanitize Operation Supported
[0:0] : 0 Crypto Erase Sanitize Operation Not Supported
hmminds : 0
hmmaxd : 0
nsetidmax : 0
endgidmax : 0
anatt : 0
anacap : 0
[7:7] : 0 Non-zero group ID Not Supported
[6:6] : 0 Group ID does change
[4:4] : 0 ANA Change state Not Supported
[3:3] : 0 ANA Persistent Loss state Not Supported
[2:2] : 0 ANA Inaccessible state Not Supported
[1:1] : 0 ANA Non-optimized state Not Supported
[0:0] : 0 ANA Optimized state Not Supported
anagrpmax : 0
nanagrpid : 0
pels : 0
domainid : 0
megcap : 0
sqes : 0x66
[7:4] : 0x6 Max SQ Entry Size (64)
[3:0] : 0x6 Min SQ Entry Size (64)
cqes : 0x44
[7:4] : 0x4 Max CQ Entry Size (16)
[3:0] : 0x4 Min CQ Entry Size (16)
maxcmd : 0
nn : 1
oncs : 0x5f
[8:8] : 0 Copy Not Supported
[7:7] : 0 Verify Not Supported
[6:6] : 0x1 Timestamp Supported
[5:5] : 0 Reservations Not Supported
[4:4] : 0x1 Save and Select Supported
[3:3] : 0x1 Write Zeroes Supported
[2:2] : 0x1 Data Set Management Supported
[1:1] : 0x1 Write Uncorrectable Supported
[0:0] : 0x1 Compare Supported
fuses : 0
[0:0] : 0 Fused Compare and Write Not Supported
fna : 0
[3:3] : 0 Format NVM Broadcast NSID (FFFFFFFFh) Supported
[2:2] : 0 Crypto Erase Not Supported as part of Secure Erase
[1:1] : 0 Crypto Erase Applies to Single Namespace(s)
[0:0] : 0 Format Applies to Single Namespace(s)
vwc : 0x7
[2:1] : 0x3 The Flush command supports NSID set to FFFFFFFFh
[0:0] : 0x1 Volatile Write Cache Present
awun : 0
awupf : 0
icsvscc : 0
[0:0] : 0 NVM Vendor Specific Commands uses Vendor Specific Format
nwpc : 0
[2:2] : 0 Permanent Write Protect Not Supported
[1:1] : 0 Write Protect Until Power Supply Not Supported
[0:0] : 0 No Write Protect and Write Protect Namespace Not Supported
acwu : 0
ocfs : 0
[1:1] : 0 Controller Copy Format 1h Not Supported
[0:0] : 0 Controller Copy Format 0h Not Supported
sgls : 0
[15:8] : 0 SGL Descriptor Threshold
[1:0] : 0 Scatter-Gather Lists Not Supported
mnan : 0
maxdna : 0
maxcna : 0
subnqn : (null)
ioccsz : 0
iorcsz : 0
icdoff : 0
fcatt : 0
[0:0] : 0 Dynamic Controller Model
msdbd : 0
ofcs : 0
[0:0] : 0 Disconnect command Not Supported
ps 0 : mp:9.00W operational enlat:0 exlat:0 rrt:0 rrl:0
rwt:0 rwl:0 idle_power:- active_power:-
active_power_workload:-
ps 1 : mp:4.60W operational enlat:0 exlat:0 rrt:1 rrl:1
rwt:1 rwl:1 idle_power:- active_power:-
active_power_workload:-
ps 2 : mp:3.80W operational enlat:0 exlat:0 rrt:2 rrl:2
rwt:2 rwl:2 idle_power:- active_power:-
active_power_workload:-
ps 3 : mp:0.0450W non-operational enlat:2000 exlat:2000 rrt:3 rrl:3
rwt:3 rwl:3 idle_power:- active_power:-
active_power_workload:-
ps 4 : mp:0.0040W non-operational enlat:15000 exlat:15000 rrt:4 rrl:4
rwt:4 rwl:4 idle_power:- active_power:-
active_power_workload:-
nvme id-ns -H
ubuntu@ubuntu-23-04:~$ sudo nvme id-ns -H /dev/nvme0n1 NVME Identify Namespace 1: nsze : 0x1bf244b0 ncap : 0x1bf244b0 nuse : 0xcd80c0 nsfeat : 0 [4:4] : 0 NPWG, NPWA, NPDG, NPDA, and NOWS are Not Supported [3:3] : 0 NGUID and EUI64 fields if non-zero, Reused [2:2] : 0 Deallocated or Unwritten Logical Block error Not Supported [1:1] : 0 Namespace uses AWUN, AWUPF, and ACWU [0:0] : 0 Thin Provisioning Not Supported nlbaf : 0 flbas : 0 [6:5] : 0 Most significant 2 bits of Current LBA Format Selected [4:4] : 0 Metadata Transferred in Separate Contiguous Buffer [3:0] : 0 Least significant 4 bits of Current LBA Format Selected mc : 0 [1:1] : 0 Metadata Pointer Not Supported [0:0] : 0 Metadata as Part of Extended Data LBA Not Supported dpc : 0 [4:4] : 0 Protection Information Transferred as Last 8 Bytes of Metadata Not Supported [3:3] : 0 Protection Information Transferred as First 8 Bytes of Metadata Not Supported [2:2] : 0 Protection Information Type 3 Not Supported [1:1] : 0 Protection Information Type 2 Not Supported [0:0] : 0 Protection Information Type 1 Not Supported dps : 0 [3:3] : 0 Protection Information is Transferred as Last 8 Bytes of Metadata [2:0] : 0 Protection Information Disabled nmic : 0 [0:0] : 0 Namespace Multipath Not Capable rescap : 0 [7:7] : 0 Ignore Existing Key - Used as defined in revision 1.2.1 or earlier [6:6] : 0 Exclusive Access - All Registrants Not Supported [5:5] : 0 Write Exclusive - All Registrants Not Supported [4:4] : 0 Exclusive Access - Registrants Only Not Supported [3:3] : 0 Write Exclusive - Registrants Only Not Supported [2:2] : 0 Exclusive Access Not Supported [1:1] : 0 Write Exclusive Not Supported [0:0] : 0 Persist Through Power Loss Not Supported fpi : 0x80 [7:7] : 0x1 Format Progress Indicator Supported [6:0] : 0 Format Progress Indicator (Remaining 0%) dlfeat : 1 [4:4] : 0 Guard Field of Deallocated Logical Blocks is set to 0xFFFF [3:3] : 0 Deallocate Bit in the Write Zeroes Command is Not Supported [2:0] : 0x1 Bytes Read From a Deallocated Logical Block and its Metadata are 0x00 nawun : 0 nawupf : 0 nacwu : 0 nabsn : 0 nabo : 0 nabspf : 0 noiob : 0 nvmcap : 0 mssrl : 0 mcl : 0 msrc : 0 nulbaf : 0 anagrpid: 0 nsattr : 0 nvmsetid: 0 endgid : 0 nguid : 61413571600053a31413570000000000 eui64 : 14135771600053a3 LBA Format 0 : Metadata Size: 0 bytes - Data Size: 512 bytes - Relative Performance: 0 Best (in use)
nvme get-feature -H
ubuntu@ubuntu-23-04:~$ sudo nvme get-feature -H /dev/nvme0n1 get-feature:0x01 (Arbitration), Current value:0x00000006 High Priority Weight (HPW): 1 Medium Priority Weight (MPW): 1 Low Priority Weight (LPW): 1 Arbitration Burst (AB): 64 get-feature:0x02 (Power Management), Current value:00000000 Workload Hint (WH): 0 - No Workload Power State (PS): 0 get-feature:0x03 (LBA Range Type), Current value:00000000 Number of LBA Ranges (NUM): 1 type : 0 - Reserved attributes : 0x1 - LBA range may be overwritten, LBA range should be visible from the OS/EFI/BIOS slba : 0 nlb : 0x1bf244af guid : 00000000000000000000000000000000 get-feature:0x04 (Temperature Threshold), Current value:0x0000015c Threshold Type Select (THSEL): 0 - Over Temperature Threshold Threshold Temperature Select (TMPSEL): 0 - Composite Temperature Temperature Threshold (TMPTH): 75°C (348 Kelvin) get-feature:0x05 (Error Recovery), Current value:00000000 Deallocated or Unwritten Logical Block Error Enable (DULBE): Disabled Time Limited Error Recovery (TLER): 0 ms get-feature:0x06 (Volatile Write Cache), Current value:0x00000001 Volatile Write Cache Enable (WCE): Enabled get-feature:0x07 (Number of Queues), Current value:0x000f000f Number of IO Completion Queues Allocated (NCQA): 16 Number of IO Submission Queues Allocated (NSQA): 16 get-feature:0x08 (Interrupt Coalescing), Current value:00000000 Aggregation Time (TIME): 0 usec Aggregation Threshold (THR): 1 get-feature:0x09 (Interrupt Vector Configuration), Current value:0x00010000 Coalescing Disable (CD): True Interrupt Vector (IV): 0 get-feature:0x0a (Write Atomicity Normal), Current value:00000000 Disable Normal (DN): False get-feature:0x0b (Async Event Configuration), Current value:0x00000200 Discovery Log Page Change Notices : Do not send async event Endurance Group Event Aggregate Log Change Notices : Do not send async event LBA Status Information Notices : Do not send async event Predictable Latency Event Aggregate Log Change Notices : Do not send async event Asymmetric Namespace Access Change Notices : Do not send async event Telemetry Log Notices : Do not send async event Firmware Activation Notices : Send async event Namespace Attribute Notices : Do not send async event SMART / Health Critical Warnings : Do not send async event get-feature:0x0c (Autonomous Power State Transition), Current value:0x00000001 Autonomous Power State Transition Enable (APSTE): Enabled Auto PST Entries ................. Entry[ 0] ................. Idle Time Prior to Transition (ITPT): 100 ms Idle Transition Power State (ITPS): 3 ................. Entry[ 1] ................. Idle Time Prior to Transition (ITPT): 100 ms Idle Transition Power State (ITPS): 3 ................. Entry[ 2] ................. Idle Time Prior to Transition (ITPT): 100 ms Idle Transition Power State (ITPS): 3 ................. Entry[ 3] ................. Idle Time Prior to Transition (ITPT): 2000 ms Idle Transition Power State (ITPS): 4 ................. Entry[ 4] ................. Idle Time Prior to Transition (ITPT): 0 ms Idle Transition Power State (ITPS): 0 ................. [...] Entry[31] ................. Idle Time Prior to Transition (ITPT): 0 ms Idle Transition Power State (ITPS): 0 ................. get-feature:0x0e (Timestamp), Current value:00000000 The timestamp is : 1696249664824 (Mon Oct 2 12:27:44 2023 UTC) The Timestamp field was initialized with a Timestamp value using a Set Features command. The controller counted time in milliseconds continuously since the Timestamp value was initialized. get-feature:0x10 (Host Controlled Thermal Management), Current value:0x01690171 Thermal Management Temperature 1 (TMT1) : 361 Kelvin (88°C) Thermal Management Temperature 2 (TMT2) : 369 Kelvin (96°C) get-feature:0x80 (Software Progress), Current value:00000000 Pre-boot Software Load Count (PBSLC): 0
nvme smart-log
ubuntu@ubuntu-23-04:~$ sudo nvme smart-log /dev/nvme0 Smart Log for NVME device:nvme0 namespace-id:ffffffff critical_warning : 0 temperature : 45°C (318 Kelvin) available_spare : 100% available_spare_threshold : 10% percentage_used : 0% endurance group critical warning summary: 0 Data Units Read : 43340 (22.19 GB) Data Units Written : 97867 (50.11 GB) host_read_commands : 560987 host_write_commands : 1141482 controller_busy_time : 23 power_cycles : 32 power_on_hours : 16 unsafe_shutdowns : 4 media_errors : 0 num_err_log_entries : 0 Warning Temperature Time : 0 Critical Composite Temperature Time : 0 Temperature Sensor 1 : 46°C (319 Kelvin) Temperature Sensor 2 : 45°C (318 Kelvin) Temperature Sensor 3 : 53°C (326 Kelvin) Temperature Sensor 4 : 45°C (318 Kelvin) Temperature Sensor 5 : 45°C (318 Kelvin) Temperature Sensor 6 : 38°C (311 Kelvin) Thermal Management T1 Trans Count : 0 Thermal Management T2 Trans Count : 0 Thermal Management T1 Total Time : 0 Thermal Management T2 Total Time : 0
nvme fw-log
ubuntu@ubuntu-23-04:~$ sudo nvme fw-log /dev/nvme0 Firmware Log for device:nvme0 afi : 0x11 frs1 : 0x4236425334413234 (42A4SB6B) frs2 : 0x4236425334413234 (42A4SB6B)
nvme show-regs
ubuntu@ubuntu-23-04:~$ sudo nvme show-regs -H /dev/nvme0 cap : 100030f0013fff Controller Ready With Media Support (CRWMS): Not Supported Controller Ready Independent of Media Support (CRIMS): Not Supported Controller Memory Buffer Supported (CMBS): The Controller Memory Buffer is Not Supported Persistent Memory Region Supported (PMRS): The Persistent Memory Region is Not Supported Memory Page Size Maximum (MPSMAX): 8192 bytes Memory Page Size Minimum (MPSMIN): 4096 bytes Boot Partition Support (BPS): No Command Sets Supported (CSS): NVM command set is Supported One or more I/O Command Sets are Not Supported I/O Command Set is Supported NVM Subsystem Reset Supported (NSSRS): Yes Doorbell Stride (DSTRD): 4 bytes Timeout (TO): 120000 ms Arbitration Mechanism Supported (AMS): Weighted Round Robin with Urgent Priority Class is not supported Contiguous Queues Required (CQR): Yes Maximum Queue Entries Supported (MQES): 16384 version : 10300 NVMe specification 1.3 cc : 460001 Controller Ready Independent of Media Enable (CRIME): Disabled I/O Completion Queue Entry Size (IOCQES): 16 bytes I/O Submission Queue Entry Size (IOSQES): 64 bytes Shutdown Notification (SHN): No notification; no effect Arbitration Mechanism Selected (AMS): Round Robin Memory Page Size (MPS): 4096 bytes I/O Command Set Selected (CSS): NVM Command Set Enable (EN): Yes csts : 1 Processing Paused (PP): No NVM Subsystem Reset Occurred (NSSRO): No Shutdown Status (SHST): Normal operation (no shutdown has been requested) Controller Fatal Status (CFS): False Ready (RDY): Yes nssr : 0 NVM Subsystem Reset Control (NSSRC): 0 crto : 0 CRIMT : 0 secs CRWMT : 0 secs intms : 0 Interrupt Vector Mask Set (IVMS): 0 intmc : 0 Interrupt Vector Mask Clear (IVMC): 0 aqa : 1f001f Admin Completion Queue Size (ACQS): 32 Admin Submission Queue Size (ASQS): 32 asq : 12263d000 Admin Submission Queue Base (ASQB): 12263d000 acq : 12263e000 Admin Completion Queue Base (ACQB): 12263e000 cmbloc : 0 Controller Memory Buffer feature is not supported cmbsz : 0 Controller Memory Buffer feature is not supported bpinfo : 0 Active Boot Partition ID (ABPID): 0 Boot Read Status (BRS): No Boot Partition read operation requested Boot Partition Size (BPSZ): 0 bprsel : 0 Boot Partition Identifier (BPID): 0 Boot Partition Read Offset (BPROF): 0 Boot Partition Read Size (BPRSZ): 0 bpmbl : 0 Boot Partition Memory Buffer Base Address (BMBBA): 0 cmbmsc : 0 Controller Base Address (CBA): 0 Controller Memory Space Enable (CMSE): 0 Capabilities Registers Enabled (CRE): CMBLOC and CMBSZ registers are NOT enabled cmbsts : 0 Controller Base Address Invalid (CBAI): 0 pmrcap : 0 Controller Memory Space Supported (CMSS): Referencing PMR with host supplied addresses is Not Supported Persistent Memory Region Timeout (PMRTO): 0 Persistent Memory Region Write Barrier Mechanisms (PMRWBM): 0 Persistent Memory Region Time Units (PMRTU): PMR time unit is 500 milliseconds Base Indicator Register (BIR): 0 Write Data Support (WDS): Write data to the PMR is not supported Read Data Support (RDS): Read data from the PMR is not supported pmrctl : 0 Enable (EN): PMR is Disabled pmrsts : 0 Controller Base Address Invalid (CBAI): 0 Health Status (HSTS): Normal Operation Not Ready (NRDY): The Persistent Memory Region is Not Ready to process PCI Express memory read and write requests Error (ERR): 0 pmrebs : 0 PMR Elasticity Buffer Size Base (PMRWBZ): 0 Read Bypass Behavior : memory reads not conflicting with memory writes in the PMR Elasticity Buffer MAY bypass those memory writes PMR Elasticity Buffer Size Units (PMRSZU): Bytes pmrswtp : 0 PMR Sustained Write Throughput (PMRSWTV): 0 PMR Sustained Write Throughput Units (PMRSWTU): Bytes/second pmrmscl : 0 Controller Base Address (CBA): 0 Controller Memory Space Enable (CMSE): 0 pmrmscu : 0 Controller Base Address (CBA): 0
lspci
ubuntu@ubuntu-23-04:~$ uname -a Linux ubuntu-23-04 6.2.0-20-generic #20-Ubuntu SMP PREEMPT_DYNAMIC Thu Apr 6 07:48:48 UTC 2023 x86_64 x86_64 x86_64 GNU/Linux ubuntu@ubuntu-23-04:~$ sudo lspci -nn | grep -i ATP 01:00.0 Non-Volatile memory controller [0108]: ATP ELECTRONICS INC Device [1db2:0d0b] (rev 03) 06:00.0 Non-Volatile memory controller [0108]: ATP ELECTRONICS INC Device [1db2:2302] (rev 03) ubuntu@ubuntu-23-04:~$ sudo lspci -s 06:00.0 -vvv -nn 06:00.0 Non-Volatile memory controller [0108]: ATP ELECTRONICS INC Device [1db2:2302] (rev 03) (prog-if 02 [NVM Express]) Subsystem: ATP ELECTRONICS INC Device [1db2:2302] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 NUMA node: 0 Region 0: Memory at 80c00000 (64-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable- Count=1/8 Maskable+ 64bit+ Address: 0000000000000000 Data: 0000 Masking: 00000000 Pending: 00000000 Capabilities: [70] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 10W DevCtl: CorrErr+ NonFatalErr+ FatalErr+ UnsupReq+ RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop- FLReset- MaxPayload 256 bytes, MaxReadReq 512 bytes DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr+ TransPend- LnkCap: Port #0, Speed 8GT/s, Width x4, ASPM L1, Exit Latency L1 <8us ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+ LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+ ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt- LnkSta: Speed 8GT/s, Width x1 (downgraded) TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR+ 10BitTagComp- 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- FRS- TPHComp- ExtTPHComp- AtomicOpsCap: 32bit- 64bit- 128bitCAS- DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- LTR+ 10BitTagReq- OBFF Disabled, AtomicOpsCtl: ReqEn- LnkCap2: Supported Link Speeds: 2.5-8GT/s, Crosslink- Retimer- 2Retimers- DRS- LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance Preset/De-emphasis: -6dB de-emphasis, 0dB preshoot LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete+ EqualizationPhase1+ EqualizationPhase2+ EqualizationPhase3+ LinkEqualizationRequest- Retimer- 2Retimers- CrosslinkRes: unsupported Capabilities: [b0] MSI-X: Enable+ Count=16 Masked- Vector table: BAR=0 offset=00002000 PBA: BAR=0 offset=00002100 Capabilities: [100 v2] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn- MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- HeaderLog: 00000000 00000000 00000000 00000000 Capabilities: [158 v1] Secondary PCI Express LnkCtl3: LnkEquIntrruptEn- PerformEqu- LaneErrStat: 0 Capabilities: [178 v1] Latency Tolerance Reporting Max snoop latency: 3145728ns Max no snoop latency: 3145728ns Capabilities: [180 v1] L1 PM Substates L1SubCap: PCI-PM_L1.2+ PCI-PM_L1.1+ ASPM_L1.2+ ASPM_L1.1+ L1_PM_Substates+ PortCommonModeRestoreTime=10us PortTPowerOnTime=10us L1SubCtl1: PCI-PM_L1.2- PCI-PM_L1.1- ASPM_L1.2- ASPM_L1.1- T_CommonMode=0us LTR1.2_Threshold=30720ns L1SubCtl2: T_PwrOn=10us Kernel driver in use: nvme Kernel modules: nvme
Weitere Informationen
- ATP M.2 NVMe (www.atpinc.com)
 |
Autor: Werner Fischer Werner Fischer arbeitet im Product Management Team von Thomas-Krenn. Er evaluiert dabei neueste Technologien und teilt sein Wissen in Fachartikeln, bei Konferenzen und im Thomas-Krenn Wiki. Bereits 2005 - ein Jahr nach seinem Abschluss des Studiums zu Computer- und Mediensicherheit an der FH Hagenberg - heuerte er beim bayerischen Server-Hersteller an. Als Öffi-Fan nutzt er gerne Bus & Bahn und genießt seinen morgendlichen Spaziergang ins Büro.
|
Das könnte Sie auch interessieren
ATP A600Vc M.2 2280 SATA SSDs
ATP N600Sv M.2 NVMe SSD
ATP SSDs im Überblick
