Kontrolery RAID Adaptec serii 6 (6Gb)
(Przekierowano z Kontrolery RAID serii 6 firmy Adaptec)
Przejdź do nawigacji
Przejdź do wyszukiwania
W tym artykule znajdują się informacje o kontrolerach RAID serii 6 firmy Adaptec (Adaptec Unified Serial SAS/SATA 6 Gb).
Ogólne informacje
- Seria kontrolerów RAID: Adaptec Series 6 (Adaptec Unified Serial SAS/SATA 6 Gb)
- Interfejs: 6Gb/s SAS (SAS-2) / PCIe 2.0
- Format: low profile (śledź low profile i full profile)
- Dalsze informacje:
- Vier SAS 2.0 RAID-Controller mit 6 Gb/s im Test: Adaptec RAID 6805 (tomshardware.de, 12.09.2011)
- Linux Drivers For Series 6 Controllers (adaptec.com/weblog, 18.11.2011), uaktualniony sterownik w Linuksie z jądrem [2.6.39]
Modele
Kontroler RAID | Porty wew. |
Porty zew. |
PCIe lanes | Cache | Ochrona cache'a | Poziomy RAID | Maks. ilość HDD z użyciem expandera SAS |
Uwagi |
---|---|---|---|---|---|---|---|---|
Adaptec RAID 6405 | 4 | - | 8 | 512MB | opcjonalnie (ZMCP) | 0, 1, 10, 1E, 5, 50[1], 6, 60[1], JBOD, Single Disk | 256 | |
Adaptec RAID 6405E | 4 | - | 1 | 128MB | nie | 0, 1, 10, 1E, JBOD | 4 | |
Adaptec RAID 6405T | 4 | - | 8 | 512MB | opcjonalnie (ZMCP) | 0, 1, 10, 1E, 5, 50[1], 6, 60[1], JBOD, Single Disk | 256 | |
Adaptec RAID 6445 | 4 | 4 | 8 | 512MB | opcjonalnie (ZMCP) | 0, 1, 10, 1E, 5, 50, 6, 60, JBOD, Single Disk | 256 | |
Adaptec RAID 6805 | 8 | - | 8 | 512MB | opcjonalnie (ZMCP) | 0, 1, 10, 1E, 5, 50, 6, 60, JBOD, Single Disk | 256 | |
Adaptec RAID 6805E | 8 | - | 4 | 128MB | nie | 0, 1, 10, 1E, JBOD | 4 | |
Adaptec RAID 6805Q | 8 | - | 8 | 512MB | ZMCP | 0, 1, 10, 1E, 5, 50, 6, 60, JBOD, Single Disk | 256 | maxCache 2.0 |
Adaptec RAID 6805T | 8 | - | 8 | 512MB | opcjonalnie (ZMCP) | 0, 1, 10, 1E, 5, 50, 6, 60, JBOD, Single Disk | 256 | |
Adaptec RAID 6805TQ | 8 | - | 8 | 512MB | ZMCP | 0, 1, 10, 1E, 5, 50, 6, 60, JBOD, Single Disk | 256 | maxCache 2.0 |
Informacje
Build 19109 (21 Dev 2012)
- Release Notes Build 19109, Auszug aus Enhancements and Bug Fixes:
- Series 6 controllers now have UEFI BIOS support.
- New maxView GUI is now supported on Series 6 controllers.
- Resolved an issue that would cause the OS to crash if multiple arrays were deleted at one time via ARCCONF.
- SGPIO activity signal is now functioning properly.
- Improved medium error handling.
- Improved SATA error handling, which could cause slow I/O or a system hang condition.
- Corrected an issue preventing a drive currently undergoing a secure erase from not appearing in the secure erase drive list after reboot in UEFI.
- A secure erase operation can now be performed in the UEFI BIOS on physical drives that members of an array.
- Corrected an issue that could allow the Series 6 controller BIOS to take too long to boot.
- Resolved an issue where the controller could hang during heavy I/O.
- Resolved an issue where a hot plug drive was not detected.
- Identified an issue where SATA negotiation could incorrectly negotiate down to 3.0Gbps.
- Resolved an issue where a building or re-building array could cause a PSOD in VMware.
- Resolved a compatability issue when multiple Samsung 830 SSD drives are attached to a Series 6 controller.
- Adaptec maxView Storage Manager v1.0 Readme
Build 19076 (18 May 2012)
- Release Notes Build 18668, Auszug aus Enhancements and Bug Fixes:
- Improved SAS drive/direct-connect hot plug detection.
- Improved SAS 6.0Gbps drive negotiation.
- Improved medium error handling.
- Removed excessive printing from command line log files during a rebuild.
- Fixed an issue where a BlinkLED condition could occur during a RAID 10 maxCache BUILD/Verify operation.
- Fixed an issue where a BlinkLED condition could occur after an unsafe shutdown.
- Resolved a cosmetic issue within Adaptec Storage Manager, where the array status would report failed after a Forced Online operation is performed.
- Fixed an issue with the scrollbar not responding as intended within Adaptec Storage Manager.
- Added maxCache status to ARCCONF.
- Resolved a cosmetic issue where the default logical name was incorrect when 10 or more arrays were created at a single time.
- Added maxCache status indicator, similar to a RAID creation, when adrive is being added to the maxCache pool.
- Adaptec Storage Manager v7.3.1 Readme
Build 18668 (09 Dec 2011)
- Release Notes Build 18668, Auszug aus Enhancements and Bug Fixes:
- New Series 6 controllers released (6405T, 6805T, 6805Q, 6805TQ).
- Support for maxCache 2.0 read & write back caching (Q models).
- Big Block Cache Bypass mode for enhanced performance in data center environments.
- VMWare 5.0 email notification & ARCCONF management support.
- Several enhancements made to maxCache for improved functionality.
- Adaptec Storage Manager v7.30.18837 Readme
Build 18301
- (Initiale Firmware)
Uwagi
- ↑ 1,0 1,1 1,2 1,3 wymaga dodatkowego chipu SAS Expander, np. poprzez wykorzystanie backplane'u z chipem SAS Expander
Autor: Werner Fischer
Powiązane artykuły
Kontrolery RAID Adaptec
Monitorowanie kontrolera RAID Adaptec za pośrednictwem MaxView Storage Manager w VMware
Zero Maintenance Cache Protection (ZMCP)