Supermicro X12SPI-TF

Aus Thomas-Krenn-Wiki
Zur Navigation springen Zur Suche springen

In diesem Wiki Artikel finden Sie Versionsinformationen zum X12SPi-TF. Diese Single-CPU Mainboards unterstützen 3rd Generation Intel Xeon Scalable Prozessoren.

Downloads

BIOS und BMC Downloads bei Thomas-Krenn:

BIOS Informationen

Microcode

Die folgenden Versionsinformationen wurden mit MCExtractor von Plato Mavropoulos erhoben.[1]

BIOS Version Microcode
CPUID

606A4

CPUID

606A5

CPUID

606A6

1.4b B000280

(2020-08-17)

C0002F0

(2021-03-08)

D000389

(2022-10-09)

1.5 D000390

(2022-12-28)

1.6 D0003A5

(2023-03-30)

Changelog

Die folgenden Versionsinformationen stammen von den BIOS Release Notes des X12SPI-TF:[2]

1.6 (08/18/2023)
1. Updated 5.22_WhitleyCrb_0ACMS_ICX_076_BETA (IPU-PV 2023.3).
1. Removed duplicated "ENERGY_PERF_BIAS_CFG Mode" HII data.
2. Resolved issue that configured SMBIOS cannot be preserved after clearing CMOS.
3. Fixed incorrect total memory size on setup if six DIMMs are installed.
4. Fixed memory still being mapped out because of UECC even after AC cycle.

1.5 (4/24/2023)
1. Updated 5.22_WhitleyCrb_0ACMS_ICX_075 Intel 2023.2 IPU-PV.
2. Improved the variable interface for buffer overflow case in security erase module.
3. Added PCIe leaky bucket degradation SEL (Sensor Type 0x13 Data1 0xAB).
4. Improved VROC key detection.
5. Boot option was not created for single hard drive under RAID mode.
6. Fixed system halts after configuring MMCFG Base to 1.5 G and 1.75 G.
7. Fixed ECO test case 2020 fails.

1.4b (01/09/2023)
1. Updated 5.22_WhitleyCrb_0ACMS_ICX_74 (Intel BKC WW46 IPU2023.1).
2. Updated SEL for processor error.
3. Fixed the memory error that is not reported in SMBIOS event log.
4. Enabled all boot options first for test case 220, 271, 356 and 457.
5. Resolved abnormal SOL resolution.

BMC Informationen

BMC Versionen

Die folgenden Versionsinformationen stammen von den BMC Firmware Release Notes des X12SPI-TF:[3]

BMC Version Build-Date
1.03.05

(n/a)

1.03.08 (10-17-2023)

Changelog

Auszug aus den Changelogs:

1.03.08 (10/17/2023)
1. Fixed fan fail feature broken from 01.03.01 to 01.03.06.
2. UID LED should be blinking but kept solid on when using Web UI UID Control.

1.03.05 (n/a)

Weitere Informationen

Einzelnachweise

Das könnte Sie auch interessieren

Supermicro H13SSL-NT
Supermicro X12DPL-i6/-NT6
Supermicro X9DRW-3LN4F+ Mainboard