Supermicro H11DSI/-NT(Rev.2.0)

In diesem Wiki Artikel finden Sie Versionsinformationen zum H11DSI/-NT (Rev.2.0). Diese Dual-CPU Mainboards unterstützen AMD EPYC 7002 Rome Prozessoren.

Downloads

BIOS und BMC Downloads bei Thomas-Krenn:

• Supermicro Mainboard H11DSi (Rev. 2.0)
• Supermicro Mainboard H11DSi-NT (Rev. 2.0)

BIOS Informationen

Microcode

Die folgenden Versionsinformationen wurden mit MCExtractor von Plato Mavropoulos erhoben.

BIOS Version	Microcode
	CPUID 00800F12	CPUID 00800F11	CPUID 00830F10	CPUID 00830F00
2.3	0800126C (2020-06-19)	08001129 (2017-07-14)	0830104D (2020-07-28)	08300027 (2019-04-01)
2.4	0800126E (2021-11-11)		08301052 (2021-11-11)
2.5			n/a
2.7			0830107A (2023-05-17)

Changelog

Die folgenden Versionsinformationen stammen von den BIOS Release Notes des H11DSI/-NT:

2.7 (10-25-2023)
Important Notes
BIOS_H11DSI-0964_20231025_2.7_STD
BIOS R 2.x only supports MB Rev. 2.00, with 32MB SPI flash ROM to
support both AMD 7001/7002 series processors.
Enhancements
1. Updated AGESA RomePI to 1.0.0.F based on 5.14_RomeCrb_0ACMK026 for AMD-SB-1032.
2. Added Rocky Linux Boot Option Name.
3. Updated Rome B0 stepping CPU microcode 0x0830107A from AMD-SB-7008 Security Bulletin to address CVE-2023-20593 issue.
4. Restored SMCI secure boot keys and Updated Secure Boot DB variable. (Unknown certificate "Addtrust External CA Root" expired on May 30th 2020).
5. Updated AGESA RomePI to 1.0.0.G based on 5.14_RomeCrb_0ACMK027.
6. Changed Pxe from Uefi(U)/Legacy(L) to L/U through Redfish.
New features 
1. Added InBand OemFID support.
2. Added OutBand OemFID support.
Fixes
1. Updated OEM FID information for PRICESSO_0_DESC and PRICESSO_1_DESC.
2. Set RDIMM\LRDIMM\3DSDIMM memory throttling trip-point @85C.

2.5 (10/27/2022)
1. Updated the DBX file to fix Secure Boot Bypass issue.
2. Updated AGESA RomePI to 1.0.0.E based on 5.14_RomeCrb_0ACMK025.
3. Updated Rome B0 stepping CPU microcode 0x08301055 to patch Errata 1161, 1176, 1179, 1183, 1214, 1268, 1386, 1417.
4. Changed setup string title from “SMCI” to “Supermicro”.
5. Removed "Vendor Keys" in security page.

2.4 (12/28/2021)
1. Changed BIOS revision to 2.4
2. Updated AGESA NaplesPI to 1.0.0.H.
3. Updated the 8012 ZP-B2 microcode to 0800126E.
4. Updated the AGESA RomePI to 1.0.0.D.
5. Updated the 8310 SSP-B0 microcode to 8301052.
6. Set Relaxed Ordering default to “Enabled”.
7. Added setup item: "Enhanced Preferred IO Mode".

2.3 (8/2/2021)
1. Updated AGESA NaplesPI to 1.0.0.D.
2. Updated 8012 ZP-B2 microcode 0800126C.
3. Fixed problem of system hanging on POSTCODE 0xB2 when JPG1 is set to disabled and the VGA card is plugged in.
4. Added SMCI HDD Security feature.
5. Updated help string of item "Input the description".
6. Changed BIOS revision to 2.3.
7. Updated AGESA RomePI to 1.0.0.9.
8. Updated 8310 SSP-B0 microcode 830104D.
9. Updated Byte6 setting and Byte12 setting of slave address C0h and C2h SATA redriver from 0xE1 to 0xC1.
10. Fixed failures of FRU0 - Manufacturer Name (PM) to sync to SMBIOS Type 3 - Manufacturer (CM)
and FRU0 - Product Part/Model Number (PPM) to sync to SMBIOS Type 1 - ProductName (PN).
11. Removed "$SMCUNHIDE$" string from "PCI AER support" setup item help string.
12. Added AMD IOMMU patch code to fix NVMe Devices drop and Hardware error in RH 7.x.
13. Fixed problem of TCG admin password reverting.
14. Corrected CPU speed information in BIOS setup.
15. Fixed inability to detect SATA device (CPU1 SATA0-3) during Ubuntu 20.10 installation when networking AOC (AOC-STGS-i2T) is plugged into Slot 5.
16. Rolled back SmcHttpBoot module to fix problem of BIOS flash from 2.1 to 2.3 hanging up and erasing all blocks in Non-Boot with Rome CPU.

BMC Informationen

BMC Versionen

Die folgenden Versionsinformationen stammen von den BMC Firmware Release Notes des H11DSI/-NT:

BMC Version	Build-Date
1.52.0	(1-18-2019)
1.52.13	(6-23-2021)
01.52.21	(9-26-2023)

Changelog

Auszug aus den Changelogs:

01.52.21 (9-26-2023)
Important Note:
1. IPMI firmware version R1.52.18 or newer is with a signed key.
Once you upgrade to this firmware version, the device cannot be
rolled back to a previous, unsigned IPMI firmware.
2. The following configuration items will be lost after upgrading to R1.52.13 or 
higher from version before R1.52.13 or roll back from R1.52.13 or higher to the version before R1.52.13. 
Please re-configure after upgrade or downgrade: "KCS Privilege", "UID Control", "Web Session", 
"Healthy Event log - advanced settings", "syslog", "network -Dynamic IPv6" and "network – Static IPv6".
Fixes
1. Fixed prolong execution time on VRM utility.
2. Fixed IPMI configuration backup file remote command execution
3. Fixed vulnerable JavaScript library prototypejs v1.5.0
4. Fixed vulnerable JavaScript library jquery-ui v1.11.4
5. Fixed vulnerable JavaScript library bootstrap v3.2.0

1.52.13 (6/23/2021)
1. Fixed failure of IPMI Redfish SATC test.
2. Fixed problem of System Firmware Error being asserted during cburn ON/OFF test.
3. Fixed failure of IPMI automation.
4. Fixed inability of IPMICFG to get information normally under SLES 12 SP4.
5. Fixed problem of GPU Status showing N/A on IPMI Web Sensor Readings when NVIDIA Tesla V100S is installed.
6. Fixed missing event log for yellow icon in System Health.
7. Fixed failure of IPMI automation test.
8. Fixed failure of result via SMSTC (TC 131 IPMI OEM x10cfg DDNS) on the H11DSU-IN.
9. Fixed failure of output with command "ipmi lan protocol 1".
10. Fixed failure to flash BIOS via IPMI web with SMT_H11AST2500_32M_152_01.
11. Fixed problem of onboard buzzer when powering on system still beeping after triggering thermal trip event.
12. Modified the Redfish PATCH method at "/Systems/1/Bios" and "/Systems/1/Bios/SD" to allow updating of BIOS attributes.
13. Fixed inability to configure BIOS over Redfish.
14. Fixed failure to set user name with special characters through SMCIPMITool.
15. Fixed inability to eject NVMe HDD successfully and the typos on the confirm window.
16. Fixed inconsistency between popup message and behavior.
17. Fixed inability to save sensor table as CVS file (using FireFox browser).
18. Corrected typo in SSL Certification confirm window.
19. Fixed inability to find the URL for "/Systems/1/Bios" and "/Systems/1/Bios/SD" to allow updating of BIOS attributes.

1.52.0 (1/18/2019)
1. Corrected ADMIN password after reloading IPMI configuration.
2. Added support for third number (build version) of IPMI firmware version.
3. Added BMC Account Security.
4. Added modification for event severity.
5. Enabled sending all event logs (Health & Maintenance) to Syslog server.
6. Added UefiPxe to Redfish System boot order.
7. Added display of advanced power readings trough DCMI (Data Center Management Interface) for AMD platforms.
8. Added BMC firmware solution to program and store unique pre-programmed password.
9. Fixed problem of SEL showing error message after AOC-S3108 updates firmware.
10. Fixed failure of comparison between new_bmccfg_006_029.xml and bmccfg_after_update_006_029.xml.
11. Fixed multiple vulnerabilities with Supermicro BMC Virtual Media.
12. Fixed missing relevant log when CPU Temperature increases and meets the 95 degree threshold.
13. Fixed failure of system to display screen after flashing BIOS.
14. Fixed issues with SPM REST API PASS.
15. Fixed problem of CPU throttling occurring when running Linpack with ROME CPU.
16. Fixed inability to launch SOL window.

Weitere Informationen

• H11DSI (www.supermicro.com)
• H11DSI-NT (www.supermicro.com)