ATP A600Vc mSATA SSDs

Dieser Artikel enthält Detail-Informationen zu den ATP A600Vc mSATA SSDs.

Allgemeine Informationen

SSD Serie: ATP A600Vc mSATA (Value Product Line)
Datenblätter:
- ATP A600Vc mSATA (Value Product Line) Product Brief

Formfaktor: mSATA
NAND Flash Memory: TLC
Schnittstelle: SATA 6 Gb/s ("SATA III")

Modelle

SSD	Kapazität (netto)	Kapazität (brutto)	Spare Area (GB und % zus. zur Netto-Kap.)	Flash-Chips	Haltbarkeit (Endurance)	Durchsatz (max. Bandbreite)		IOPS (max. Random IOPS Performance)
SSD	Kapazität (netto)	Kapazität (brutto)	Spare Area (GB und % zus. zur Netto-Kap.)	Flash-Chips	Haltbarkeit (Endurance)	Lesen	Schreiben	Lesen	Schreiben (über erste 8 GiB)	Schreiben (über ges. Datenbereich)
AF32GSTHI-TM1	32 GB (32.017.047.552 Byte)	n/a	n/a	n/a	48 TBW (JEDEC219 Client Workload)	210 MB/s	35 MB/s	12.400 IOPS	n/a	8.800 IOPS
AF64GSTHI-TM1	64 GB (64.023.257.088 Byte)	n/a	n/a	n/a	96 TBW (JEDEC219 Client Workload)	430 MB/s	70 MB/s	24.000 IOPS	n/a	18.500 IOPS

Firmware

Date	Revision	Description
n/a	SBFMB1.1	Firmware of 64 GB device.

Quelle: Firmware Release Notes oder Auslesen von SSD-Informationen.

Programmausgaben

smartctl

smartctl 6.6 2016-05-31 r4324 [x86_64-linux-4.15.0-47-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
 
=== START OF INFORMATION SECTION ===
Device Model:     ATP SATA III mSATA
Serial Number:    4AC9079216FB00002997
LU WWN Device Id: 0 000000 000000000
Firmware Version: SBFMB1.1
User Capacity:    32.017.047.552 bytes [32,0 GB]
Sector Size:      512 bytes logical/physical
Rotation Rate:    Solid State Device
Form Factor:      mSATA
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   Unknown(0x0ff8) (minor revision not indicated)
SATA Version is:  SATA 3.2, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is:    Fri Apr 12 11:23:52 2019 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
 
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
 
General SMART Values:
Offline data collection status:  (0x00) Offline data collection activity
                                        was never started.
                                        Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                (65535) seconds.
Offline data collection
capabilities:                    (0x79) SMART execute Offline immediate.
                                        No Auto Offline data collection support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        (  30) minutes.
Conveyance self-test routine
recommended polling time:        (   6) minutes.
 
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   050    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0012   100   100   000    Old_age   Always       -       3
168 Unknown_Attribute       0x0012   100   100   000    Old_age   Always       -       0
170 Unknown_Attribute       0x0003   085   085   010    Pre-fail  Always       -       12
173 Unknown_Attribute       0x0012   100   100   000    Old_age   Always       -       1
192 Power-Off_Retract_Count 0x0012   100   100   000    Old_age   Always       -       3
194 Temperature_Celsius     0x0023   067   067   000    Pre-fail  Always       -       33 (Min/Max 33/33)
218 Unknown_Attribute       0x000b   100   100   050    Pre-fail  Always       -       0
231 Temperature_Celsius     0x0013   100   100   000    Pre-fail  Always       -       100
241 Total_LBAs_Written      0x0012   100   100   000    Old_age   Always       -       0
 
SMART Error Log Version: 1
No Errors Logged
 
SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]
 
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

hdparm

/dev/sdb:
 
ATA device, with non-removable media
        Model Number:       ATP SATA III mSATA
        Serial Number:      4AC9079216FB00002997
        Firmware Revision:  SBFMB1.1
        Transport:          Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA  Rev 2.5, SATA Rev 2.6, SATA Rev 3.0
Standards:
        Supported: 11 10 9 8 7 6 5
        Likely used: 11
Configuration:
        Logical         max     current
        cylinders       16383   16383
        heads           16      16
        sectors/track   63      63
        --
        CHS current addressable sectors:    16514064
        LBA    user addressable sectors:    62533296
        LBA48  user addressable sectors:    62533296
        Logical  Sector size:                   512 bytes
        Physical Sector size:                   512 bytes
        Logical Sector-0 offset:                  0 bytes
        device size with M = 1024*1024:       30533 MBytes
        device size with M = 1000*1000:       32017 MBytes (32 GB)
        cache/buffer size  = unknown
        Form Factor: unknown (0x0006]
        Nominal Media Rotation Rate: Solid State Device
Capabilities:
        LBA, IORDY(can be disabled)
        Queue depth: 32
        Standby timer values: spec'd by Standard, no device specific minimum
        R/W multiple sector transfer: Max = 16  Current = 16
        DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
             Cycle time: min=120ns recommended=120ns
        PIO: pio0 pio1 pio2 pio3 pio4
             Cycle time: no flow control=120ns  IORDY flow control=120ns
Commands/features:
        Enabled Supported:
           *    SMART feature set
                Security Mode feature set
           *    Power Management feature set
           *    Write cache
           *    Look-ahead
           *    Host Protected Area feature set
           *    WRITE_BUFFER command
           *    READ_BUFFER command
           *    NOP cmd
           *    DOWNLOAD_MICROCODE
                SET_MAX security extension
           *    48-bit Address feature set
           *    Device Configuration Overlay feature set
           *    Mandatory FLUSH_CACHE
           *    FLUSH_CACHE_EXT
           *    SMART error logging
           *    SMART self-test
           *    General Purpose Logging feature set
           *    WRITE_{DMA|MULTIPLE}_FUA_EXT
           *    64-bit World wide name
           *    WRITE_UNCORRECTABLE_EXT command
           *    {READ,WRITE}_DMA_EXT_GPL commands
           *    Segmented DOWNLOAD_MICROCODE
           *    Gen1 signaling speed (1.5Gb/s)
           *    Gen2 signaling speed (3.0Gb/s)
           *    Gen3 signaling speed (6.0Gb/s)
           *    Native Command Queueing (NCQ)
           *    Phy event counters
           *    READ_LOG_DMA_EXT equivalent to READ_LOG_EXT
           *    DMA Setup Auto-Activate optimization
                Device-initiated interface power management
           *    Software settings preservation
           *    DOWNLOAD MICROCODE DMA command
           *    SET MAX SETPASSWORD/UNLOCK DMA commands
           *    WRITE BUFFER DMA command
           *    READ BUFFER DMA command
           *    DEVICE CONFIGURATION SET/IDENTIFY DMA commands
           *    Data Set Management TRIM supported (limit 8 blocks)
Security:
        Master password revision code = 65534
                supported
        not     enabled
        not     locked
                frozen
        not     expired: security count
                supported: enhanced erase
        20min for SECURITY ERASE UNIT. 60min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 0000000000000000
        NAA             : 0
        IEEE OUI        : 000000
        Unique ID       : 000000000
Checksum: correct

Einzelnachweise

Autor: Werner Fischer

Werner Fischer arbeitet im Product Management Team von Thomas-Krenn. Er evaluiert dabei neueste Technologien und teilt sein Wissen in Fachartikeln, bei Konferenzen und im Thomas-Krenn Wiki. Bereits 2005 - ein Jahr nach seinem Abschluss des Studiums zu Computer- und Mediensicherheit an der FH Hagenberg - heuerte er beim bayerischen Server-Hersteller an. Als Öffi-Fan nutzt er gerne Bus & Bahn und genießt seinen morgendlichen Spaziergang ins Büro.