MegaRAID 9540-2M2 Series RAID Controller
(Weitergeleitet von 9540-2M2)
Zur Navigation springen
Zur Suche springen
In diesem Artikel finden Sie Informationen zum Broadcom 9540-2M2 M.2 RAID Controller. Der RAID Controller basiert so wie der MegaRAID 9540-8i auf dem Broadcom SAS3808 Chip - bietet aber durch seine beiden M.2 Slots die Möglichkeit eines Hardware-RAIDs ohne dabei HotSwap-Einschübe zu belegen.
Allgemeine Informationen
- Schnittstelle: TriMode SATA & NVMe / PCIe 4.0 x8
- Bauhöhe: Low Profile (Slot-Blech für Low Profile und Full Profile enthalten)
- M.2 Socket: 2x (supporting 22110, 2280, 2260, 2242 & 2230)
- RAID erstellen: siehe RAID erstellen mit StorCLI
Modelle
9540-2M2 | ||
---|---|---|
IC Family | SAS3808
I/O controller (IOC) | |
M.2 Ports | 2 | |
Cache | - | |
RAID-Level | 0, 1 | |
VMware IO HCL | ID 57656 | |
Windows Server Catalog | 9540-2M2 | |
IDs | VID | 1000 |
DID | 10e6 | |
SVID | 1000 | |
SSID | 40e0 |
Programmausgaben
lspci
# lspci -vvv -nn -s 51:00.0 RAID bus controller [0104]: Broadcom / LSI MegaRAID 12GSAS/PCIe Secure SAS38xx [1000:10e6] Subsystem: Broadcom / LSI MegaRAID 12GSAS/PCIe Secure SAS38xx [1000:40e0] Physical Slot: 85 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 32 bytes Interrupt: pin A routed to IRQ 18 NUMA node: 0 Region 0: Memory at 20bfffe00000 (64-bit, prefetchable) [size=1M] Region 2: Memory at 20bfffd00000 (64-bit, prefetchable) [size=1M] Region 4: Memory at d0e00000 (32-bit, non-prefetchable) [size=1M] Region 5: I/O ports at a000 [size=256] Expansion ROM at d0d00000 [disabled] [size=1M] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [50] MSI: Enable- Count=1/1 Maskable+ 64bit+ Address: 0000000000000000 Data: 0000 Masking: 00000000 Pending: 00000000 Capabilities: [70] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 1024 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0.000W DevCtl: CorrErr- NonFatalErr- FatalErr+ UnsupReq- RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ FLReset- MaxPayload 512 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ NonFatalErr- FatalErr- UnsupReq+ AuxPwr- TransPend- LnkCap: Port #0, Speed 16GT/s, Width x8, ASPM L0s L1, Exit Latency L0s unlimited, L1 <64us ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+ LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed 16GT/s (ok), Width x8 (ok) TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range ABCD, TimeoutDis+ NROPrPrP- LTR- 10BitTagComp+ 10BitTagReq- OBFF Not Supported, ExtFmt- EETLPPrefix- EmergencyPowerReduction Not Supported, EmergencyPowerReductionInit- FRS- TPHComp- ExtTPHComp- AtomicOpsCap: 32bit- 64bit- 128bitCAS- DevCtl2: Completion Timeout: 260ms to 900ms, TimeoutDis- LTR- OBFF Disabled, AtomicOpsCtl: ReqEn- LnkCap2: Supported Link Speeds: 2.5-16GT/s, Crosslink- Retimer+ 2Retimers+ DRS- LnkCtl2: Target Link Speed: 16GT/s, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete+ EqualizationPhase1+ EqualizationPhase2+ EqualizationPhase3+ LinkEqualizationRequest- Retimer- 2Retimers- CrosslinkRes: Upstream Port Capabilities: [b0] MSI-X: Enable+ Count=128 Masked- Vector table: BAR=0 offset=00002000 PBA: BAR=0 offset=00003000 Capabilities: [100 v2] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol- UESvrt: DLP+ SDES+ TLP+ FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr+ CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- AdvNonFatalErr- AERCap: First Error Pointer: 00, ECRCGenCap+ ECRCGenEn- ECRCChkCap+ ECRCChkEn- MultHdrRecCap- MultHdrRecEn- TLPPfxPres- HdrLogCap- HeaderLog: 00000000 00000000 00000000 00000000 Capabilities: [148 v1] Power Budgeting <?> Capabilities: [158 v1] Alternative Routing-ID Interpretation (ARI) ARICap: MFVC- ACS-, Next Function: 0 ARICtl: MFVC- ACS-, Function Group: 0 Capabilities: [168 v1] Secondary PCI Express LnkCtl3: LnkEquIntrruptEn- PerformEqu- LaneErrStat: 0 Capabilities: [188 v1] Physical Layer 16.0 GT/s <?> Capabilities: [1b0 v1] Lane Margining at the Receiver <?> Capabilities: [248 v1] Vendor Specific Information: ID=0002 Rev=4 Len=100 <?> Capabilities: [348 v1] Vendor Specific Information: ID=0001 Rev=1 Len=038 <?> Capabilities: [380 v1] Data Link Feature <?> Kernel driver in use: megaraid_sas Kernel modules: megaraid_sas
storcli
Generating detailed summary of the adapter, it may take a while to complete. CLI Version = 007.2202.0000.0000 Mar 14, 2022 Operating system = Linux 5.15.0-56-generic Controller = 0 Status = Success Description = None Basics : ====== Controller = 0 Model = MegaRAID 9540-2M2 Serial Number = SPC4607833 Current Controller Date/Time = 02/24/2023, 13:22:23 Current System Date/time = 02/24/2023, 13:22:25 SAS Address = 500062b211c91900 PCI Address = 00:51:00:00 Mfg Date = 11/28/22 Rework Date = 00/00/00 Revision No = 06001 Version : ======= Firmware Package Build = 52.23.0-4636 Firmware Version = 5.230.01-3723 PSOC FW Version = 0x0006 PSOC Part Number = 14790 NVDATA Version = 5.2300.00-0613 CBB Version = 24.25.01.00 Bios Version = 7.23.00.0_0x07170100 HII Version = 07.23.03.00 HIIA Version = 07.23.03.00 Driver Name = megaraid_sas Driver Version = 07.717.02.00-rc1 Bus : === Vendor Id = 0x1000 Device Id = 0x10E6 SubVendor Id = 0x1000 SubDevice Id = 0x40E0 Host Interface = PCI-E Device Interface = SAS-12G Bus Number = 81 Device Number = 0 Function Number = 0 Domain ID = 0 Pending Images in Flash : ======================= Image name = No pending images Status : ====== Controller Status = Optimal Memory Correctable Errors = 0 Memory Uncorrectable Errors = 0 ECC Bucket Count = 0 Any Offline VD Cache Preserved = No BBU Status = NA PD Firmware Download in progress = No Support PD Firmware Download = Yes Lock Key Assigned = No Failed to get lock key on bootup = No Lock key has not been backed up = No Bios was not detected during boot = No Controller must be rebooted to complete security operation = No A rollback operation is in progress = No At least one PFK exists in NVRAM = No SSC Policy is WB = No Controller has booted into safe mode = No Controller shutdown required = No Controller has booted into certificate provision mode = No Current Personality = RAID-Mode Supported Adapter Operations : ============================ Rebuild Rate = Yes CC Rate = Yes BGI Rate = Yes Reconstruct Rate = Yes Patrol Read Rate = Yes Alarm Control = No Cluster Support = No BBU = NA Spanning = Yes Dedicated Hot Spare = Yes Revertible Hot Spares = Yes Foreign Config Import = Yes Self Diagnostic = Yes Allow Mixed Redundancy on Array = No Global Hot Spares = Yes Deny SCSI Passthrough = No Deny SMP Passthrough = No Deny STP Passthrough = No Support more than 8 Phys = Yes FW and Event Time in GMT = No Support Enhanced Foreign Import = Yes Support Enclosure Enumeration = Yes Support Allowed Operations = Yes Abort CC on Error = Yes Support Multipath = Yes Support Odd & Even Drive count in RAID1E = No Support Security = Yes Support Config Page Model = Yes Support the OCE without adding drives = Yes Support EKM = Yes Snapshot Enabled = No Support PFK = Yes Support PI = No Support Ld BBM Info = No Support Shield State = Yes Block SSD Write Disk Cache Change = No Support Suspend Resume BG ops = Yes Support Emergency Spares = Yes Support Set Link Speed = Yes Support Boot Time PFK Change = No Support JBOD = Yes Disable Online PFK Change = No Support Perf Tuning = Yes Support SSD PatrolRead = Yes Real Time Scheduler = Yes Support Reset Now = Yes Support Emulated Drives = Yes Headless Mode = Yes Dedicated HotSpares Limited = No Point In Time Progress = Yes Extended LD = No Support Uneven span = No Support Config Auto Balance = No Support Maintenance Mode = No Support Diagnostic results = Yes Support Ext Enclosure = Yes Support Sesmonitoring = Yes Support SecurityonJBOD = Yes Support ForceFlash = Yes Support DisableImmediateIO = Yes Support LargeIOSupport = No Support DrvActivityLEDSetting = Yes Support FlushWriteVerify = No Support CPLDUpdate = No Support ForceTo512e = Yes Support discardCacheDuringLDDelete = No Support JBOD Write cache = No Support Large QD Support = No Support Ctrl Info Extended = Yes Support IButton less = Yes Support AES Encryption Algorithm = No Support Encrypted MFC = Yes Support Snapdump = Yes Support Force Personality Change = No Support Dual Fw Image = No Support PSOC Update = Yes Support Secure Boot = Yes Support Debug Queue = No Support Least Latency Mode = No Support OnDemand Snapdump = Yes Support Clear Snapdump = Yes Support FW Triggered Snapdump = Yes Support PHY current speed = Yes Support Lane current speed = Yes Support NVMe Width = Yes Support Lane DeviceType = Yes Support Extended Drive performance Monitoring = No Support NVMe Repair = Yes Support Platform Security = No Support None Mode Params = Yes Support Extended Controller Property = Yes Support Smart Poll Interval for DirectAttached = Yes Support Write Journal Pinning = No Support SMP Passthru with Port Number = Yes Support SnapDump Preboot Trace Buffer Toggle = No Support Parity Read Cache Bypass = Yes Support NVMe Init Error Device ConnectorIndex = No Support VolatileKey = Yes Support PSOC Part Information = Yes Enterprise Key management : ========================= Capability = Supported Boot Agent = Not Available Configured = No Supported PD Operations : ======================= Force Online = Yes Force Offline = Yes Force Rebuild = Yes Deny Force Failed = No Deny Force Good/Bad = No Deny Missing Replace = No Deny Clear = No Deny Locate = No Support Power State = Yes Set Power State For Cfg = No Support T10 Power State = No Support Temperature = Yes NCQ = Yes Support Max Rate SATA = No Support Degraded Media = No Support Parallel FW Update = Yes Support Drive Crypto Erase = Yes Support SSD Wear Gauge = No Support Sanitize = No Support Extended Sanitize = Yes Supported VD Operations : ======================= Read Policy = No Write Policy = No IO Policy = No Access Policy = Yes Disk Cache Policy = Yes Reconstruction = Yes Deny Locate = No Deny CC = No Allow Ctrl Encryption = No Enable LDBBM = Yes Support FastPath = Yes Performance Metrics = Yes Power Savings = No Support Powersave Max With Cache = No Support Breakmirror = No Support SSC WriteBack = No Support SSC Association = No Support VD Hide = Yes Support VD Cachebypass = Yes Support VD discardCacheDuringLDDelete = No Support VD Scsi Unmap = Yes Advanced Software Option : ======================== ----------------------------------------- Adv S/W Opt Time Remaining Mode ----------------------------------------- MegaRAID FastPath Unlimited - MegaRAID SafeStore Unlimited - ----------------------------------------- Safe ID = XQUCARN3BUEP1VM7TW7HRRWVW45RH9N2DTXPLNIZ HwCfg : ===== ChipRevision = A0 BatteryFRU = N/A Front End Port Count = 0 Backend Port Count = 16 BBU = Absent Alarm = Absent Serial Debugger = Present NVRAM Size = 128KB Flash Size = 32MB On Board Memory Size = 0MB CacheVault Flash Size = NA TPM = Absent Upgrade Key = Absent On Board Expander = Absent Temperature Sensor for ROC = Present Temperature Sensor for Controller = Absent Upgradable CPLD = Absent Upgradable PSOC = Present Current Size of CacheCade (GB) = 0 Current Size of FW Cache (MB) = 0 ROC temperature(Degree Celsius) = 39 Policies : ======== Policies Table : ============== ------------------------------------------------ Policy Current Default ------------------------------------------------ Predictive Fail Poll Interval 300 sec Interrupt Throttle Active Count 16 Interrupt Throttle Completion 50 us Rebuild Rate 30 % 30% PR Rate 30 % 30% BGI Rate 30 % 30% Check Consistency Rate 30 % 30% Reconstruction Rate 30 % 30% Cache Flush Interval 4s ------------------------------------------------ Flush Time(Default) = 4s Drive Coercion Mode = none Auto Rebuild = On Battery Warning = Off ECC Bucket Size = 15 ECC Bucket Leak Rate (hrs) = 24 Restore Hot Spare on Insertion = Off Expose Enclosure Devices = On Maintain PD Fail History = On Reorder Host Requests = On Auto detect BackPlane = SGPIO/i2c SEP Load Balance Mode = Auto Security Key Assigned = Off Disable Online Controller Reset = Off Use drive activity for locate = Off Boot : ==== BIOS Enumerate VDs = 1 Stop BIOS on Error = Off Delay during POST = 0 Spin Down Mode = None Enable Ctrl-R = No Enable Web BIOS = No Enable PreBoot CLI = No Enable BIOS = Yes Max Drives to Spinup at One Time = 2 Maximum number of direct attached drives to spin up in 1 min = 0 Delay Among Spinup Groups (sec) = 2 Allow Boot with Preserved Cache = Off High Availability : ================= Topology Type = None Cluster Permitted = No Cluster Active = No Defaults : ======== Phy Polarity = 0 Phy PolaritySplit = 0 Strip Size = 64 KB Write Policy = WT Read Policy = No Read Ahead Cache When BBU Bad = Off Cached IO = Off VD PowerSave Policy = Controller Defined Default spin down time (mins) = 30 Coercion Mode = None ZCR Config = Unknown Max Chained Enclosures = 2 Direct PD Mapping = No Restore Hot Spare on Insertion = No Expose Enclosure Devices = Yes Maintain PD Fail History = Yes Zero Based Enclosure Enumeration = No Disable Puncturing = No EnableLDBBM = Yes DisableHII = No Un-Certified Hard Disk Drives = Allow SMART Mode = Mode 6 Enable LED Header = Yes LED Show Drive Activity = Yes Dirty LED Shows Drive Activity = No EnableCrashDump = No Disable Online Controller Reset = No Treat Single span R1E as R10 = No Power Saving option = Enabled TTY Log In Flash = Yes Auto Enhanced Import = Yes BreakMirror RAID Support = No Disable Join Mirror = Yes Enable Shield State = Yes Time taken to detect CME = 60 sec Capabilities : ============ Supported Drives = SAS, SATA, NVMe RAID Level Supported = RAID0, RAID1(2 or more drives), RAID00, RAID10(2 or more drives per span) Enable JBOD = Yes Mix in Enclosure = Allowed Mix of SAS/SATA of HDD type in VD = Allowed Mix of SAS/SATA of SSD type in VD = Not Allowed Mix of SSD/HDD in VD = Not Allowed SAS Disable = No Max Arms Per VD = 32 Max Spans Per VD = 8 Max Arrays = 32 Max VD per array = 16 Max Number of VDs = 32 Max Parallel Commands = 1517 Max SGE Count = 60 Max Data Transfer Size = 2048 sectors Max Strips PerIO = 20 Max Configurable CacheCade Size(GB) = 0 Max Transportable DGs = 0 Enable Snapdump = Yes Enable SCSI Unmap = Yes Read cache bypass enabled for Parity RAID LDs = Yes FDE Drive Mix Support = No Min Strip Size = 64 KB Max Strip Size = 64 KB Scheduled Tasks : =============== Consistency Check Reoccurrence = 168 hrs Next Consistency check launch = 02/25/2023, 03:00:00 Patrol Read Reoccurrence = 168 hrs Next Patrol Read launch = 02/25/2023, 03:00:00 Battery learn Reoccurrence = NA Next Battery Learn = NA OEMID = Broadcom Secure Boot : =========== Secure Boot Enabled = Yes Controller in Soft Secure Mode = No Controller in Hard Secure Mode = Yes Key Update Pending = No Remaining Secure Boot Key Slots = 7 Security Protocol properties : ============================ Security Protocol = None Drive Groups = 1 TOPOLOGY : ======== ----------------------------------------------------------------------------- DG Arr Row EID:Slot DID Type State BT Size PDC PI SED DS3 FSpace TR ----------------------------------------------------------------------------- 0 - - - - RAID0 Optl N 111.281 GB dflt N N dflt N N 0 0 - - - RAID0 Optl N 111.281 GB dflt N N dflt N N 0 0 0 14:1 0 DRIVE Onln N 111.281 GB dflt N N dflt - N ----------------------------------------------------------------------------- DG=Disk Group Index|Arr=Array Index|Row=Row Index|EID=Enclosure Device ID DID=Device ID|Type=Drive Type|Onln=Online|Rbld=Rebuild|Optl=Optimal|Dgrd=Degraded Pdgd=Partially degraded|Offln=Offline|BT=Background Task Active PDC=PD Cache|PI=Protection Info|SED=Self Encrypting Drive|Frgn=Foreign DS3=Dimmer Switch 3|dflt=Default|Msng=Missing|FSpace=Free Space Present TR=Transport Ready Virtual Drives = 1 VD LIST : ======= --------------------------------------------------------------- DG/VD TYPE State Access Consist Cache Cac sCC Size Name --------------------------------------------------------------- 0/0 RAID0 Optl RW Yes NRWTD - ON 111.281 GB --------------------------------------------------------------- VD=Virtual Drive| DG=Drive Group|Rec=Recovery Cac=CacheCade|OfLn=OffLine|Pdgd=Partially Degraded|Dgrd=Degraded Optl=Optimal|dflt=Default|RO=Read Only|RW=Read Write|HD=Hidden|TRANS=TransportReady B=Blocked|Consist=Consistent|R=Read Ahead Always|NR=No Read Ahead|WB=WriteBack AWB=Always WriteBack|WT=WriteThrough|C=Cached IO|D=Direct IO|sCC=Scheduled Check Consistency Physical Drives = 2 PD LIST : ======= ------------------------------------------------------------------------------------------------------ EID:Slt DID State DG Size Intf Med SED PI SeSz Model Sp Type ------------------------------------------------------------------------------------------------------ 14:0 1 UGood - 59.125 GB SATA SSD N N 512B TS64GMTS400S U - 14:1 0 Onln 0 111.281 GB NVMe SSD N N 512B ATP NVMe M.2 2280 SSD U - ------------------------------------------------------------------------------------------------------ EID=Enclosure Device ID|Slt=Slot No|DID=Device ID|DG=DriveGroup DHS=Dedicated Hot Spare|UGood=Unconfigured Good|GHS=Global Hotspare UBad=Unconfigured Bad|Sntze=Sanitize|Onln=Online|Offln=Offline|Intf=Interface Med=Media Type|SED=Self Encryptive Drive|PI=Protection Info SeSz=Sector Size|Sp=Spun|U=Up|D=Down|T=Transition|F=Foreign UGUnsp=UGood Unsupported|UGShld=UGood shielded|HSPShld=Hotspare shielded CFShld=Configured shielded|Cpybck=CopyBack|CBShld=Copyback Shielded UBUnsp=UBad Unsupported|Rbld=Rebuild Enclosures = 1 Enclosure LIST : ============== ------------------------------------------------------------------------ EID State Slots PD PS Fans TSs Alms SIM Port# ProdID VendorSpecific ------------------------------------------------------------------------ 14 OK 2 2 0 0 0 0 0 - VirtualSES ------------------------------------------------------------------------ EID=Enclosure Device ID | PD=Physical drive count | PS=Power Supply count TSs=Temperature sensor count | Alms=Alarm count | SIM=SIM Count | ProdID=Product ID
Autor: Bastian Stockinger Bastian Stockinger arbeitet im Product Management Team von Thomas-Krenn.
|
Das könnte Sie auch interessieren
MegaRAID Firmware mit StorCLI flashen
MegaRAID Storage Manager für VMware ESXi 5.5 Server
VMware ESXi 5.1 und 5.5 zeigen bei MegaRAID Controllern UNCONFIGURED GOOD auch bei konfigurierten Laufwerken