Intel DC S3500 Series SSDs information
Please note that this article / this category refers either on older software / hardware components or is no longer maintained for other reasons. This page is no longer updated and is purely for reference purposes still here in the archive available. |
---|
This article contains detailed information about the Intel DC S3500 Series SSDs. The article provides an overview of the Intel SSD series Intel SSDs at a glance.
General information
- SSD series: Intel DC S3500
- Data sheets:
- Form factor: 2.5"
- NAND flash memory: MLC
- Process technology: 20nm
- Interface: SATA 6 Gb/s ("SATA III")
- Additional information:
- Intel SSD DC S3500 Series (ark.intel.com)
- Special features:
- Full End to End data protection
- Advanced Encryption Standard (AES) Capable (256-bit Encryption)
- Enhanced Power-Loss Data Protection[1]
- Temperature Monitoring and Logging
TKperf test report
Intel DC S3500 TKperf Testreport
Models
SSD | Capacity (net) |
Capacity (gross) |
Spare Area (GB and % in add. to net cap.) |
Flash-Chips | Endurance | Throughput | IOPS (max. random IOPS performance) | |||
---|---|---|---|---|---|---|---|---|---|---|
Read | Write | Read | Write (on first 8 GiB) |
Write (on whole capacity) | ||||||
SSDSC1NB080G401 | 80 GB (80.026.341.376 Byte) |
112 GiB (120,3 GB) |
40,3 GB (50,2 %) |
7 Stück 16 GiB (29F16B08LCMF2) | 45 TB | 340 MB/s | 100 MB/s | 70.000 IOPS | n/a | 7.000 IOPS |
SSDSC2BB120G401 | 120 GB (120.034.123.776 Byte) |
unknown | unknown | unknown | 70 TB | 445 MB/s | 135 MB/s | 75.000 IOPS | n/a | 4.600 IOPS |
SSDSC2BB160G401 | 160 GB (160.041.885.696 Byte) |
unknown | unknown | unknown | 100 TB | 475 MB/s | 175 MB/s | 75.000 IOPS | n/a | 7.500 IOPS |
SSDSC2BB240G401 | 240 GB (240.057.409.536 Byte) |
unknown | unknown | unknown | 140 TB | 500 MB/s | 260 MB/s | 75.000 IOPS | n/a | 7.500 IOPS |
SSDSC2BB300G401 | 300 GB (300.069.052.416 Byte) |
336 GiB (360,8 GB) |
60,7 GB (20,2 %) |
8x32 GiB (29F32B08MCMF2) + 5x16 GiB (29F16B08LCMF2) |
170 TB | 500 MB/s | 315 MB/s | 75.000 IOPS | n/a | 9.000 IOPS |
SSDSC2BB480G401 | 480 GB (480.103.981.056 Byte) |
528 GiB (566,9 GB) |
86,8 GB (18,1 %) |
1x64 GiB (29F64B08NCMF2) + 14 Stück 32 GiB (29F32B08MCMF2) + 1x16 GiB (29F16B08LCMF2)[2] |
275 TB | 500 MB/s | 410 MB/s | 75.000 IOPS | n/a | 11.000 IOPS |
SSDSC2BB600G401 | 600 GB (600.127.266.816 Byte) |
unknown | unknown | unknown | 330 TB | 500 MB/s | 410 MB/s | 75.000 IOPS | n/a | 11.000 IOPS |
SSDSC2BB800G401 | 800 GB (800.166.076.416 Byte) |
unknown | unknown | unknown | 450 TB | 500 MB/s | 450 MB/s | 75.000 IOPS | n/a | 11.500 IOPS |
Test reports
- Intel SSD DC S3500 Review (480GB): Part 1 (anandtech.com), 11.06.2013
- The SSD DC S3500 Review: Intel's 6 Gb/s Controller And 20 nm NAND (tomshardware.com), 11.06.2013
- Intel DC S3500 480GB Enterprise SSD Review (tweaktown.com), 11.06.2013
Firmware
Date | Revision | Description |
---|---|---|
17.06.2013 | D2010355 | PCN 112371-00 (PDF) |
- | D2010311 | Firmware of sample devices. (seen on a 300 GB sample SSD) |
Source: Firmware Release Notes or querying of SSD's.
Outputs
smartctl
Note: As of 07/30/2013 there is no entry for Intel DC S3500 series in the smartmontools. We therefore have transmitted the information about this SSD to the smartmontools-database mailing list [http://sourceforge.net/mailarchive/forum.php?thread_name=562204457.267083.1375190658742.JavaMail.root%40thomas-krenn.com&forum_name=smartmontools-database so that the SSD is included in the database.
# smartctl -a /dev/sdf smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-38-generic] (local build) Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Device Model: INTEL SSDSC2BB300G4 Serial Number: BTWL307103XW300PGN LU WWN Device Id: 5 001517 8f35d1297 Firmware Version: D2010311 User Capacity: 300,069,052,416 bytes [300 GB] Sector Size: 512 bytes logical/physical Device is: Not in smartctl database [for details use: -P showall] ATA Version is: 8 ATA Standard is: ATA-8-ACS revision 4 Local Time is: Tue Jul 30 15:01:28 2013 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: ( 0) seconds. Offline data collection capabilities: (0x79) SMART execute Offline immediate. No Auto Offline data collection support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 2) minutes. Conveyance self-test routine recommended polling time: ( 2) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 1 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 5 Reallocated_Sector_Ct 0x0032 096 096 000 Old_age Always - 0 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 209 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 8 170 Unknown_Attribute 0x0033 100 100 010 Pre-fail Always - 0 171 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 172 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 174 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 5 175 Program_Fail_Count_Chip 0x0033 100 100 010 Pre-fail Always - 8591835783 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0 184 End-to-End_Error 0x0033 100 100 090 Pre-fail Always - 0 187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0 190 Airflow_Temperature_Cel 0x0022 076 076 000 Old_age Always - 24 (Min/Max 19/24) 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 5 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 24 197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0 199 UDMA_CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0 225 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 202293 226 Load-in_Time 0x0032 100 100 000 Old_age Always - 65535 227 Torq-amp_Count 0x0032 100 100 000 Old_age Always - 4294967295 228 Power-off_Retract_Count 0x0032 100 100 000 Old_age Always - 65535 232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0 233 Media_Wearout_Indicator 0x0032 099 099 000 Old_age Always - 0 234 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0 241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 202293 242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 179760 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.
hdparm
# hdparm -I /dev/sdf /dev/sdf: ATA device, with non-removable media Model Number: INTEL SSDSC2BB300G4 Serial Number: BTWL307103XW300PGN Firmware Revision: D2010311 Media Serial Num: Media Manufacturer: Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6 Standards: Used: unknown (minor revision code 0x0029) Supported: 8 7 6 5 Likely used: 8 Configuration: Logical max current cylinders 16383 16383 heads 16 16 sectors/track 63 63 -- CHS current addressable sectors: 16514064 LBA user addressable sectors: 268435455 LBA48 user addressable sectors: 586072368 Logical Sector size: 512 bytes Physical Sector size: 512 bytes Logical Sector-0 offset: 0 bytes device size with M = 1024*1024: 286168 MBytes device size with M = 1000*1000: 300069 MBytes (300 GB) cache/buffer size = unknown Form Factor: 2.5 inch Nominal Media Rotation Rate: Solid State Device Capabilities: LBA, IORDY(can be disabled) Queue depth: 32 Standby timer values: spec'd by Standard, no device specific minimum R/W multiple sector transfer: Max = 1 Current = 1 DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 Cycle time: min=120ns recommended=120ns PIO: pio0 pio1 pio2 pio3 pio4 Cycle time: no flow control=120ns IORDY flow control=120ns Commands/features: Enabled Supported: * SMART feature set Security Mode feature set * Power Management feature set * Write cache * Look-ahead * Host Protected Area feature set * WRITE_BUFFER command * READ_BUFFER command * NOP cmd * DOWNLOAD_MICROCODE SET_MAX security extension * 48-bit Address feature set * Mandatory FLUSH_CACHE * FLUSH_CACHE_EXT * SMART error logging * SMART self-test * General Purpose Logging feature set * WRITE_{DMA|MULTIPLE}_FUA_EXT * 64-bit World wide name * IDLE_IMMEDIATE with UNLOAD * WRITE_UNCORRECTABLE_EXT command * {READ,WRITE}_DMA_EXT_GPL commands * Segmented DOWNLOAD_MICROCODE unknown 119[6] * Gen1 signaling speed (1.5Gb/s) * Gen2 signaling speed (3.0Gb/s) * Gen3 signaling speed (6.0Gb/s) * Native Command Queueing (NCQ) * Phy event counters * unknown 76[15] * Software settings preservation * SMART Command Transport (SCT) feature set * SCT LBA Segment Access (AC2) * SCT Error Recovery Control (AC3) * SCT Features Control (AC4) * SCT Data Tables (AC5) * reserved 69[4] * Data Set Management TRIM supported (limit 6 blocks) * Deterministic read ZEROs after TRIM Security: Master password revision code = 65534 supported not enabled not locked not frozen not expired: security count supported: enhanced erase 2min for SECURITY ERASE UNIT. 2min for ENHANCED SECURITY ERASE UNIT. Logical Unit WWN Device Identifier: 50015178f35d1297 NAA : 5 IEEE OUI : 001517 Unique ID : 8f35d1297 Checksum: correct
References
- ↑ protects the built-in cache contents in case of power failure, see Technology Brief: Enhanced power-loss data protection in the Intel® Solid-State Drive 320 Series
- ↑ Intel DC S3500 480GB Enterprise SSD Review (page 3) (tweaktown.com), 11.06.2013
Author: Werner Fischer Werner Fischer, working in the Knowledge Transfer team at Thomas-Krenn, completed his studies of Computer and Media Security at FH Hagenberg in Austria. He is a regular speaker at many conferences like LinuxTag, OSMC, OSDC, LinuxCon, and author for various IT magazines. In his spare time he enjoys playing the piano and training for a good result at the annual Linz marathon relay.
|