Intel 510 Series SSDs Information

From Thomas-Krenn-Wiki
Jump to navigation Jump to search
Please note that this article / this category refers either on older software / hardware components or is no longer maintained for other reasons.
This page is no longer updated and is purely for reference purposes still here in the archive available.

This article contains detailed information on Intel 510 Series SSDs.

Intel 510 Series 120 GB
Intel 510 Series 120 GB
(board upper side)
Intel 510 Series 120 GB
(board lower side)

General information

TKperf test report

[[Media:{{{tkperf}}}|Intel 510 Series TKperf Testreport]]

Models

SSD Capacity
(net)
Capacity
(gross)
Spare Area
(GB and % in add.
to net cap.)
Flash-Chips Endurance Throughput IOPS
(max. random IOPS performance)
Read Write Read Write
(on first
8 GiB)
Write
(on whole
capacity)
SSDSC2MH120A2 120 GB
(120.034.123.776 Byte)
128 GiB
(137,4 GB)
17,4 GB
(14,5%)
16x8 GiB (29F64G08CAMDD)[1] 36,5 TB 450 MB/s 210 MB/s 20.000 IOPS 8.000 IOPS -
SSDSC2MH250A2 250 GB
(250.059.350.016 Byte)
256 GiB
(274,9 GB)
24,8 GB
(9,9%)
16x16 GiB (29F16B08JAMDD)[2] 36,5 TB 500 MB/s 250 MB/s 20.000 IOPS 8.000 IOPS -

Test reports

Firmware

Date Revision Description
- PPG2 Initial Firmware.

Source: Firmware Release Notes or querying of SSD's.

Outputs

smartctl

root@ubuntu-11-10:~# smartctl -a /dev/sdb
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.0.0-16-generic] (local build)
Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Intel 510 Series SSDs
Device Model:     INTEL SSDSC2MH120A2
Serial Number:    LNEL1055006R120CGN
LU WWN Device Id: 0 150735 1ed6690f3
Firmware Version: PPG2
User Capacity:    120,034,123,776 bytes [120 GB]
Sector Size:      512 bytes logical/physical
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   8
ATA Standard is:  ATA-8-ACS revision 2d
Local Time is:    Wed Feb 22 08:20:32 2012 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x00)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Disabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		(   10) seconds.
Offline data collection
capabilities: 			 (0x15) SMART execute Offline immediate.
					No Auto Offline data collection support.
					Abort Offline collection upon new
					command.
					No Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					No Selective Self-test supported.
SMART capabilities:            (0x0002)	Does not save SMART data before
					entering power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x00)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  10) minutes.
SCT capabilities: 	       (0x003d)	SCT Status supported.
					SCT Error Recovery Control supported.
					SCT Feature Control supported.
					SCT Data Table supported.

SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  3 Spin_Up_Time            0x0020   100   100   000    Old_age   Offline      -       0
  4 Start_Stop_Count        0x0030   100   100   000    Old_age   Offline      -       0
  5 Reallocated_Sector_Ct   0x0032   100   100   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       25
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       50
192 Unsafe_Shutdown_Count   0x0032   100   100   000    Old_age   Always       -       11
225 Host_Writes_32MiB       0x0030   100   100   000    Old_age   Offline      -       44392
232 Available_Reservd_Space 0x0033   100   100   010    Pre-fail  Always       -       0
233 Media_Wearout_Indicator 0x0032   100   100   000    Old_age   Always       -       0

SMART Error Log not supported
SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


Device does not support Selective Self Tests/Logging

hdparm

root@ubuntu-11-10:~# hdparm -I /dev/sdb

/dev/sdb:

ATA device, with non-removable media
	Model Number:       INTEL SSDSC2MH120A2                     
	Serial Number:      LNEL1055006R120CGN  
	Firmware Revision:  PPG2    
	Transport:          Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0
Standards:
	Used: ATA-8-ACS revision 2d 
	Supported: 8 7 6 5 
Configuration:
	Logical		max	current
	cylinders	16383	16383
	heads		16	16
	sectors/track	63	63
	--
	CHS current addressable sectors:   16514064
	LBA    user addressable sectors:  234441648
	LBA48  user addressable sectors:  234441648
	Logical  Sector size:                   512 bytes
	Physical Sector size:                   512 bytes
	device size with M = 1024*1024:      114473 MBytes
	device size with M = 1000*1000:      120034 MBytes (120 GB)
	cache/buffer size  = unknown
	Nominal Media Rotation Rate: Solid State Device
Capabilities:
	LBA, IORDY(can be disabled)
	Queue depth: 32
	Standby timer values: spec'd by Standard, no device specific minimum
	R/W multiple sector transfer: Max = 16	Current = 1
	DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 
	     Cycle time: min=120ns recommended=120ns
	PIO: pio0 pio1 pio2 pio3 pio4 
	     Cycle time: no flow control=120ns  IORDY flow control=120ns
Commands/features:
	Enabled	Supported:
	   *	SMART feature set
	    	Security Mode feature set
	   *	Power Management feature set
	   *	Write cache
	   *	Look-ahead
	   *	Host Protected Area feature set
	   *	WRITE_BUFFER command
	   *	READ_BUFFER command
	   *	NOP cmd
	   *	DOWNLOAD_MICROCODE
	    	SET_MAX security extension
	   *	48-bit Address feature set
	   *	Device Configuration Overlay feature set
	   *	Mandatory FLUSH_CACHE
	   *	FLUSH_CACHE_EXT
	   *	SMART error logging
	   *	SMART self-test
	   *	General Purpose Logging feature set
	   *	WRITE_{DMA|MULTIPLE}_FUA_EXT
	   *	64-bit World wide name
	   *	IDLE_IMMEDIATE with UNLOAD
	   *	Segmented DOWNLOAD_MICROCODE
	   *	Gen1 signaling speed (1.5Gb/s)
	   *	Gen2 signaling speed (3.0Gb/s)
	   *	Gen3 signaling speed (6.0Gb/s)
	   *	Native Command Queueing (NCQ)
	   *	Host-initiated interface power management
	   *	Phy event counters
	   *	DMA Setup Auto-Activate optimization
	    	Device-initiated interface power management
	   *	Software settings preservation
	   *	SMART Command Transport (SCT) feature set
	   *	SCT LBA Segment Access (AC2)
	   *	SCT Error Recovery Control (AC3)
	   *	SCT Features Control (AC4)
	   *	SCT Data Tables (AC5)
	   *	Data Set Management TRIM supported (limit 8 blocks)
Security: 
	Master password revision code = 65534
		supported
	not	enabled
	not	locked
	not	frozen
	not	expired: security count
		supported: enhanced erase
	2min for SECURITY ERASE UNIT. 2min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 01507351ed6690f3
	NAA		: 0
	IEEE OUI	: 150735
	Unique ID	: 1ed6690f3
Checksum: correct

References

Related articles

Intel 320 Series SSDs Information
Intel 910 SSD perform a Secure Erase
Intel X25-M G2 Postville SSDs information