Intel DC S3500 Series SSDs
| Hinweis: Bitte beachten Sie, dass dieser Artikel / diese Kategorie sich entweder auf ältere Software/Hardware Komponenten bezieht oder aus sonstigen Gründen nicht mehr gewartet wird. Diese Seite wird nicht mehr aktualisiert und ist rein zu Referenzzwecken noch hier im Archiv abrufbar. |
|---|
Dieser Artikel enthält Detail-Informationen zu Intel DC S3500 Series SSDs. Einen Überblick über alle Intel SSD Serien zeigt der Artikel Intel SSDs im Überblick.



(Board Oberseite)

(Board Unterseite)
Allgemeine Informationen
- SSD Serie: Intel DC S3500
- Datenblätter:
- Formfaktor: 2,5"
- NAND Flash Memory: MLCStrukturbreite: * 20nm
- Schnittstelle: SATA 6 Gb/s ("SATA III")
- Weitere Informationen:
- Intel SSD DC S3500 Series (ark.intel.com)
- Besonderheiten:
- Full End to End data protection
- Advanced Encryption Standard (AES) Capable (256-bit Encryption)
- Enhanced Power-Loss Data Protection[1]
- Temperature Monitoring and Logging
TKperf Testreport
Intel DC S3500 TKperf Testreport
Modelle
| SSD | Kapazität (netto) |
Kapazität (brutto) |
Spare Area (GB und % zus. zur Netto-Kap.) |
Flash-Chips | Haltbarkeit (Endurance) |
Durchsatz (max. Bandbreite) |
IOPS (max. Random IOPS Performance) | |||
|---|---|---|---|---|---|---|---|---|---|---|
| Lesen | Schreiben | Lesen | Schreiben (über erste 8 GiB) |
Schreiben (über ges. Datenbereich) | ||||||
| SSDSC1NB080G401 | 80 GB (80.026.341.376 Byte) |
112 GiB (120,3 GB) |
40,3 GB (50,2 %) |
7 Stück 16 GiB (29F16B08LCMF2) | 45 TB | 340 MB/s | 100 MB/s | 70.000 IOPS | n/a | 7.000 IOPS |
| SSDSC2BB120G401 | 120 GB (120.034.123.776 Byte) |
unbek. | unbek. | unbek. | 70 TB | 445 MB/s | 135 MB/s | 75.000 IOPS | n/a | 4.600 IOPS |
| SSDSC2BB160G401 | 160 GB (160.041.885.696 Byte) |
unbek. | unbek. | unbek. | 100 TB | 475 MB/s | 175 MB/s | 75.000 IOPS | n/a | 7.500 IOPS |
| SSDSC2BB240G401 | 240 GB (240.057.409.536 Byte) |
unbek. | unbek. | unbek. | 140 TB | 500 MB/s | 260 MB/s | 75.000 IOPS | n/a | 7.500 IOPS |
| SSDSC2BB300G401 | 300 GB (300.069.052.416 Byte) |
336 GiB (360,8 GB) |
60,7 GB (20,2 %) |
8 Stück 32 GiB (29F32B08MCMF2) + 5 Stück 16 GiB (29F16B08LCMF2) |
170 TB | 500 MB/s | 315 MB/s | 75.000 IOPS | n/a | 9.000 IOPS |
| SSDSC2BB480G401 | 480 GB (480.103.981.056 Byte) |
528 GiB (566,9 GB) |
86,8 GB (18,1 %) |
1 Stück 64 GiB (29F64B08NCMF2) + 14 Stück 32 GiB (29F32B08MCMF2) + 1 Stück 16 GiB (29F16B08LCMF2)[2] |
275 TB | 500 MB/s | 410 MB/s | 75.000 IOPS | n/a | 11.000 IOPS |
| SSDSC2BB600G401 | 600 GB (600.127.266.816 Byte) |
unbek. | unbek. | unbek. | 330 TB | 500 MB/s | 410 MB/s | 75.000 IOPS | n/a | 11.000 IOPS |
| SSDSC2BB800G401 | 800 GB (800.166.076.416 Byte) |
unbek. | unbek. | unbek. | 450 TB | 500 MB/s | 450 MB/s | 75.000 IOPS | n/a | 11.500 IOPS |
Testberichte
- Intel SSD DC S3500 Review (480GB): Part 1 (anandtech.com), 11.06.2013
- The SSD DC S3500 Review: Intel's 6 Gb/s Controller And 20 nm NAND (tomshardware.com), 11.06.2013
- Intel DC S3500 480GB Enterprise SSD Review (tweaktown.com), 11.06.2013
Firmware
| Date | Revision | Description |
|---|---|---|
| 17.06.2013 | D2010355 | PCN 112371-00 (PDF) |
| - | D2010311 | Firmware of sample devices. (seen on a 300 GB sample SSD) |
Quelle: Firmware Release Notes oder Auslesen von SSD-Informationen.
Programmausgaben
smartctl
Anmerkung: Per 30.07.2013 gibt es in der smartmontools Datenbank noch keinen Eintrag zur Intel DC S3500 Serie. Wir haben daher die Informationen zu dieser SSD an die smartmontools-database Mailingliste übermittelt, damit die SSD in die Datenbank aufgenommen wird.
smartctl 6.4 2014-10-07 r4002 [x86_64-linux-3.17.0-ie31200] (local build)
Copyright (C) 2002-14, Bruce Allen, Christian Franke, www.smartmontools.org
/dev/sda [megaraid_disk_06] [SAT]: Device open changed type from 'megaraid,6' to 'sat+megaraid,6'
=== START OF INFORMATION SECTION ===
Model Family: Intel 730 and DC S3500/S3700 Series SSDs
Device Model: INTEL SSDSC2BB080G4
Serial Number: BTWL326403PS080KGN
LU WWN Device Id: 5 001517 8f365a7fb
Firmware Version: D2010355
User Capacity: 80,026,361,856 bytes [80.0 GB]
Sector Size: 512 bytes logical/physical
Rotation Rate: Solid State Device
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 4
SATA Version is: SATA 2.6, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Nov 12 13:46:00 2014 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART Status not supported: ATA return descriptor not supported by controller firmware
SMART overall-health self-assessment test result: PASSED
Warning: This result is based on an Attribute check.
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 0) seconds.
Offline data collection
capabilities: (0x79) SMART execute Offline immediate.
No Auto Offline data collection support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 1) minutes.
Extended self-test routine
recommended polling time: ( 2) minutes.
Conveyance self-test routine
recommended polling time: ( 2) minutes.
SCT capabilities: (0x003d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 1
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
5 Reallocated_Sector_Ct 0x0032 097 097 000 Old_age Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 1178
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 211
170 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0
171 Program_Fail_Count 0x0032 100 100 000 Old_age Always - 0
172 Erase_Fail_Count 0x0032 100 100 000 Old_age Always - 0
174 Unsafe_Shutdown_Count 0x0032 100 100 000 Old_age Always - 61
175 Power_Loss_Cap_Test 0x0033 100 100 010 Pre-fail Always - 610 (1 295)
183 SATA_Downshift_Count 0x0032 100 100 000 Old_age Always - 0
184 End-to-End_Error 0x0033 100 100 090 Pre-fail Always - 0
187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0
190 Temperature_Case 0x0022 074 074 000 Old_age Always - 26 (Min/Max 14/26)
192 Unsafe_Shutdown_Count 0x0032 100 100 000 Old_age Always - 61
194 Temperature_Internal 0x0022 100 100 000 Old_age Always - 26
197 Current_Pending_Sector 0x0032 100 100 000 Old_age Always - 0
199 CRC_Error_Count 0x003e 100 100 000 Old_age Always - 0
225 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 70283
226 Workld_Media_Wear_Indic 0x0032 100 100 000 Old_age Always - 0
227 Workld_Host_Reads_Perc 0x0032 100 100 000 Old_age Always - 97
228 Workload_Minutes 0x0032 100 100 000 Old_age Always - 295
232 Available_Reservd_Space 0x0033 100 100 010 Pre-fail Always - 0
233 Media_Wearout_Indicator 0x0032 100 100 000 Old_age Always - 0
234 Thermal_Throttle 0x0032 100 100 000 Old_age Always - 0/0
241 Host_Writes_32MiB 0x0032 100 100 000 Old_age Always - 70283
242 Host_Reads_32MiB 0x0032 100 100 000 Old_age Always - 1650800
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
No self-tests have been logged. [To run self-tests, use: smartctl -t]
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
hdparm
# hdparm -I /dev/sdf
/dev/sdf:
ATA device, with non-removable media
Model Number: INTEL SSDSC2BB300G4
Serial Number: BTWL307103XW300PGN
Firmware Revision: D2010311
Media Serial Num:
Media Manufacturer:
Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6
Standards:
Used: unknown (minor revision code 0x0029)
Supported: 8 7 6 5
Likely used: 8
Configuration:
Logical max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: 268435455
LBA48 user addressable sectors: 586072368
Logical Sector size: 512 bytes
Physical Sector size: 512 bytes
Logical Sector-0 offset: 0 bytes
device size with M = 1024*1024: 286168 MBytes
device size with M = 1000*1000: 300069 MBytes (300 GB)
cache/buffer size = unknown
Form Factor: 2.5 inch
Nominal Media Rotation Rate: Solid State Device
Capabilities:
LBA, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, no device specific minimum
R/W multiple sector transfer: Max = 1 Current = 1
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6
Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
SET_MAX security extension
* 48-bit Address feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
* WRITE_{DMA|MULTIPLE}_FUA_EXT
* 64-bit World wide name
* IDLE_IMMEDIATE with UNLOAD
* WRITE_UNCORRECTABLE_EXT command
* {READ,WRITE}_DMA_EXT_GPL commands
* Segmented DOWNLOAD_MICROCODE
unknown 119[6]
* Gen1 signaling speed (1.5Gb/s)
* Gen2 signaling speed (3.0Gb/s)
* Gen3 signaling speed (6.0Gb/s)
* Native Command Queueing (NCQ)
* Phy event counters
* unknown 76[15]
* Software settings preservation
* SMART Command Transport (SCT) feature set
* SCT LBA Segment Access (AC2)
* SCT Error Recovery Control (AC3)
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
* reserved 69[4]
* Data Set Management TRIM supported (limit 6 blocks)
* Deterministic read ZEROs after TRIM
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
supported: enhanced erase
2min for SECURITY ERASE UNIT. 2min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 50015178f35d1297
NAA : 5
IEEE OUI : 001517
Unique ID : 8f35d1297
Checksum: correct
Einzelnachweise
- ↑ schützt Inhalte des integrierten Caches bei einem Stromausfall, siehe Technology Brief: Enhanced power-loss data protection in the Intel® Solid-State Drive 320 Series
- ↑ Intel DC S3500 480GB Enterprise SSD Review (page 3) (tweaktown.com), 11.06.2013
|
Autor: Werner Fischer Werner Fischer arbeitet im Product Management Team von Thomas-Krenn. Er evaluiert dabei neueste Technologien und teilt sein Wissen in Fachartikeln, bei Konferenzen und im Thomas-Krenn Wiki. Bereits 2005 - ein Jahr nach seinem Abschluss des Studiums zu Computer- und Mediensicherheit an der FH Hagenberg - heuerte er beim bayerischen Server-Hersteller an. Als Öffi-Fan nutzt er gerne Bus & Bahn und genießt seinen morgendlichen Spaziergang ins Büro.
|

