DIAGNOSTIC INFORMATION

Test run: 01/23/2011 10:41:50

Event Log Table
ID ROM Data
SD Card Utilization
Dashboard
Firmware
All Component Status
Component Data - Servers
Component Data - Switches
Component Data - Storage Controllers
Component Data - Management Module (CMM)
Component Data - Fans
Component Data - Power Supplies
Storage - Layout
Storage - Physical Drives
Storage - Virtual Drives
Storage - Pools
Configuration - IP Configuration
Configuration - Notification
Configuration - SNMP
Configuration - Date/Time

Event Log
----------------------------------------

EventLogId	Date	EventPolicyId	ComponentId	InstanceId	EventSeverityId	EventTypeId	DetailedDescription	EventCause	EventAction	BreifDesecription	EPI	UserName	Params	ExtraData
1	2010-12-25 13:33:16	All Records Deleted from EventLog	Management Module		Info	System	All EventLog records deleted (365 records) by user admin at 192.168.21.21			All Records Deleted from EventLog	3308	admin	Array ( [TableName] => EventLog [NumRecords] => 365 [User] => admin [IP] => 192.168.21.21 )
2	2010-12-25 14:24:57	Server Power Up	Server 1		Info	IPMI	Sensor: Power Unit Status - Server 1 power unit is on.	Server Sensor: Power Unit Status; This is due to one of the following: 1) pushing the power button on the server front panel; 2) Power On Action from the Graphical User Interface; 3) ACPI Event (wakeup on lan, etc).	No action is required	Server Power Up	2011	System	Array ( [snsrnum] => 1 [number] => 1 [generator] => 30 [snsrName] => Power Unit Status [assert] => Deasserted [verb] => was [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:3000 Num:01 Type:09 EDir:ef ED1:00 ED2:ff ED3:ff";
3	2010-12-25 14:25:57	Server Power Off	Server 1		Info	IPMI	Sensor: Power Unit Status - Server 1 power unit is off.	Server Sensor: Power Unit Status; This is due to one of the following: 1) pushing the power button on the server front panel; 2) Power Off Action from the Graphical User Interface; 3) ACPI Power Down request from the host operating system; 4) Power loss.	No action is required	Server Power Off	2010	System	Array ( [snsrnum] => 1 [number] => 1 [generator] => 30 [snsrName] => Power Unit Status [assert] => Asserted [verb] => is [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:3000 Num:01 Type:09 EDir:6f ED1:00 ED2:ff ED3:ff";
4	2010-12-25 14:25:58	Action 'Power Off' on 'Server 1' by user 'admin'	Server 1		Info	Application	Action 'Power Off' on 'Server 1' by user 'admin', with output of: 'Server 1 is now powered off.'. Warning: 'None.'			Action 'Power Off' on 'Server 1' by user 'admin'	503	admin	Array ( [label] => Power Off [component] => Server 1 [return] => Server 1 is now powered off. [userWarning] => None. [AliasName] => Server 1 )
5	2010-12-25 14:26:33	Action 'Assign' on 'HyperV' by user 'admin'	Virtual Drive	22F30001559A58F6	Info	Application	Action 'Assign' on 'HyperV' by user 'admin', with output of: 'Virtual drive HyperV unassigned from Server 1 (drive position 0) successfully'. Warning: 'None.'			Action 'Assign' on 'HyperV' by user 'admin'	503	admin	Array ( [label] => Assign [component] => HyperV [return] => Virtual drive HyperV unassigned from Server 1 (drive position 0) successfully [userWarning] => None. [AliasName] => HyperV )
6	2010-12-25 14:26:50	Action 'Assign' on 'Server1' by user 'admin'	Virtual Drive	22320001558DE6E1	Info	Application	Action 'Assign' on 'Server1' by user 'admin', with output of: 'Virtual drive Server1 assigned to Server 1 (drive position 0) successfully'. Warning: 'None.'			Action 'Assign' on 'Server1' by user 'admin'	503	admin	Array ( [label] => Assign [component] => Server1 [return] => Virtual drive Server1 assigned to Server 1 (drive position 0) successfully [userWarning] => None. [AliasName] => Server1 )
7	2010-12-25 14:27:06	Action 'Delete' on 'Server3' by user 'admin'	Virtual Drive	22300001558D662E	Info	Application	Action 'Delete' on 'Server3' by user 'admin', with output of: 'Virtual drive Server3 deleted.'. Warning: 'None.'			Action 'Delete' on 'Server3' by user 'admin'	503	admin	Array ( [label] => Delete [component] => Server3 [return] => Virtual drive Server3 deleted. [userWarning] => None. [AliasName] => Server3 )
8	2010-12-25 14:27:07	Virtual drive 'Server3' has been deleted	Virtual Drive	22300001558D662E	Info	Storage	Virtual drive 'Server3' has been deleted from storage pool 'ESX'.			Virtual drive 'Server3' has been deleted	114	System	Array ( [ControllerId] => 0 [AliasName] => Server3 [PreviousAliasName] => Unknown [parent] => ESX )	s:143:"00000000000000000000000000000000000000000000000022300001558D662E\|PSev:2\|Time:20101225142706.000000+000\|SysName:2000001517AAAE54\|Seq:197\|Ctrlr:0";
9	2010-12-25 14:28:14	Server Power Up	Server 1		Info	IPMI	Sensor: Power Unit Status - Server 1 power unit is on.	Server Sensor: Power Unit Status; This is due to one of the following: 1) pushing the power button on the server front panel; 2) Power On Action from the Graphical User Interface; 3) ACPI Event (wakeup on lan, etc).	No action is required	Server Power Up	2011	System	Array ( [snsrnum] => 1 [number] => 1 [generator] => 30 [snsrName] => Power Unit Status [assert] => Deasserted [verb] => was [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:3000 Num:01 Type:09 EDir:ef ED1:00 ED2:ff ED3:ff";
10	2010-12-25 14:28:15	Action 'Power On' on 'Server 1' by user 'admin'	Server 1		Info	Application	Action 'Power On' on 'Server 1' by user 'admin', with output of: 'Server 1 is now powered on.'. Warning: 'None.'			Action 'Power On' on 'Server 1' by user 'admin'	503	admin	Array ( [label] => Power On [component] => Server 1 [return] => Server 1 is now powered on. [userWarning] => None. [AliasName] => Server 1 )
11	2010-12-25 14:28:43	KVM Session sensor - Session Pending	Server 1		Info	IPMI	Sensor: KVM Session sensor - Session Pending.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Pending	2040	System	Array ( [snsrnum] => 71 [number] => 1 [generator] => 30 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:3000 Num:71 Type:c0 EDir:70 ED1:00 ED2:ff ED3:ff";
12	2010-12-25 14:28:44	KVM Session sensor - Session Established	Server 1		Info	IPMI	Sensor: KVM Session sensor - Session Established.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Established	2041	System	Array ( [snsrnum] => 71 [number] => 1 [generator] => 30 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 01 )	s:68:"Raw IPMI (hex): Gen:3000 Num:71 Type:c0 EDir:70 ED1:01 ED2:ff ED3:ff";
13	2010-12-25 14:29:29	KVM Session sensor - Session Ended Normally	Server 1		Info	IPMI	Sensor: KVM Session sensor - Session Ended Normally.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Ended Normally	2042	System	Array ( [snsrnum] => 71 [number] => 1 [generator] => 30 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 02 )	s:68:"Raw IPMI (hex): Gen:3000 Num:71 Type:c0 EDir:70 ED1:02 ED2:ff ED3:ff";
14	2010-12-25 14:29:41	KVM Session sensor - Session Pending	Server 1		Info	IPMI	Sensor: KVM Session sensor - Session Pending.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Pending	2040	System	Array ( [snsrnum] => 71 [number] => 1 [generator] => 30 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:3000 Num:71 Type:c0 EDir:70 ED1:00 ED2:ff ED3:ff";
15	2010-12-25 14:29:42	KVM Session sensor - Session Established	Server 1		Info	IPMI	Sensor: KVM Session sensor - Session Established.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Established	2041	System	Array ( [snsrnum] => 71 [number] => 1 [generator] => 30 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 01 )	s:68:"Raw IPMI (hex): Gen:3000 Num:71 Type:c0 EDir:70 ED1:01 ED2:ff ED3:ff";
19	2010-12-25 14:31:42	KVM Session sensor - Session Ended Normally	Server 1		Info	IPMI	Sensor: KVM Session sensor - Session Ended Normally.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Ended Normally	2042	System	Array ( [snsrnum] => 71 [number] => 1 [generator] => 30 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 02 )	s:68:"Raw IPMI (hex): Gen:3000 Num:71 Type:c0 EDir:70 ED1:02 ED2:ff ED3:ff";
20	2010-12-25 14:31:48	Action 'Terminate KVM Session' on 'Server 1' by user 'admin'	Server 1		Info	Application	Action 'Terminate KVM Session' on 'Server 1' by user 'admin', with output of: 'KVM Session Shutdown Complete.'. Warning: 'None.'			Action 'Terminate KVM Session' on 'Server 1' by user 'admin'	503	admin	Array ( [label] => Terminate KVM Session [component] => Server 1 [return] => KVM Session Shutdown Complete. [userWarning] => None. [AliasName] => Server 1 )
21	2010-12-25 14:32:15	KVM Session sensor - Session Pending	Server 1		Info	IPMI	Sensor: KVM Session sensor - Session Pending.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Pending	2040	System	Array ( [snsrnum] => 71 [number] => 1 [generator] => 30 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:3000 Num:71 Type:c0 EDir:70 ED1:00 ED2:ff ED3:ff";
22	2010-12-25 14:32:16	KVM Session sensor - Session Established	Server 1		Info	IPMI	Sensor: KVM Session sensor - Session Established.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Established	2041	System	Array ( [snsrnum] => 71 [number] => 1 [generator] => 30 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 01 )	s:68:"Raw IPMI (hex): Gen:3000 Num:71 Type:c0 EDir:70 ED1:01 ED2:ff ED3:ff";
26	2010-12-25 14:45:07	Server Power Off	Server 1		Info	IPMI	Sensor: Power Unit Status - Server 1 power unit is off.	Server Sensor: Power Unit Status; This is due to one of the following: 1) pushing the power button on the server front panel; 2) Power Off Action from the Graphical User Interface; 3) ACPI Power Down request from the host operating system; 4) Power loss.	No action is required	Server Power Off	2010	System	Array ( [snsrnum] => 1 [number] => 1 [generator] => 30 [snsrName] => Power Unit Status [assert] => Asserted [verb] => is [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:3000 Num:01 Type:09 EDir:6f ED1:00 ED2:ff ED3:ff";
27	2010-12-25 14:45:08	Action 'Power Off' on 'Server 1' by user 'admin'	Server 1		Info	Application	Action 'Power Off' on 'Server 1' by user 'admin', with output of: 'Server 1 is now powered off.'. Warning: 'None.'			Action 'Power Off' on 'Server 1' by user 'admin'	503	admin	Array ( [label] => Power Off [component] => Server 1 [return] => Server 1 is now powered off. [userWarning] => None. [AliasName] => Server 1 )
28	2010-12-25 14:47:18	Synchronization is started	Storage Subsystem	227B000155EB1351	Info	Storage	Synchronization is started	The virtual drive is created	No action is required	Synchronization is started	205	System	Array ( [ControllerId] => 0 )	s:143:"000000000000000000000000000000000000000000000000227B000155EB1351\|PSev:2\|Time:20101225144716.000000+000\|SysName:2000001517AAAE54\|Seq:203\|Ctrlr:0";
29	2010-12-25 14:47:17	Virtual drive 'Server2.copy1' has been created	Virtual Drive	227B000155EB1351	Info	Storage	Virtual drive 'Server2.copy1' has been created in storage pool 'ESX'.			Virtual drive 'Server2.copy1' has been created	113	System	Array ( [ControllerId] => 0 [AliasName] => Server2.copy1 [PreviousAliasName] => Unknown [parent] => ESX )	s:143:"000000000000000000000000000000000000000000000000227B000155EB1351\|PSev:2\|Time:20101225144716.000000+000\|SysName:2000001517AAAE54\|Seq:202\|Ctrlr:0";
30	2010-12-25 14:47:23	Action 'Copy' on 'Server2' by user 'admin'	Virtual Drive	22FE000155F23DED	Info	Application	Action 'Copy' on 'Server2' by user 'admin', with output of: 'The following virtual drives have been created:Server2.copy1Copy of source Server2 to targets has started. As the names have been automatically generated, you may want to rename them after the copy completes'. Warning: 'None.'			Action 'Copy' on 'Server2' by user 'admin'	503	admin	Array ( [label] => Copy [component] => Server2 [return] => The following virtual drives have been created:Server2.copy1Copy of source Server2 to targets has started. As the names have been automatically generated, you may want to rename them after the copy completes [userWarning] => None. [AliasName] => Server2 )
34	2010-12-25 14:47:28	VD copy from 'ESX/Server2' to 'ESX/Server2.copy1' started	Storage Subsystem		Info	Storage	Virtual copy from 'ESX/Server2' to 'ESX/Server2.copy1' started			VD copy from 'ESX/Server2' to 'ESX/Server2.copy1' started	3494	System	Array ( [ControllerId] => 0 [Source] => ESX/Server2 [Target] => ESX/Server2.copy1 )	s:143:"FFFFFFFF0000000022FE000155F23DED0000000000000000227B000155EB1351\|PSev:2\|Time:20101225144723.000000+000\|SysName:2000001517AAAE54\|Seq:207\|Ctrlr:0";
36	2010-12-25 15:25:09	Synchronization is stopped internally	Storage Subsystem	227B000155EB1351	Info	Storage	Synchronization is stopped internally	Virtual drive is not online or Higher priority task like LDI is started or delete Virtual Drive/Storage Pool.	None	Synchronization is stopped internally	212	System	Array ( [ControllerId] => 0 )	s:143:"080000000000000000000000000000000000000000000000227B000155EB1351\|PSev:2\|Time:20101225152507.000000+000\|SysName:2000001517AAAE54\|Seq:210\|Ctrlr:0";
37	2010-12-25 15:25:08	VD copy from 'ESX/Server2' to 'ESX/Server2.copy1' completed	Storage Subsystem		Info	Storage	Virtual drive copy from 'ESX/Server2' to 'ESX/Server2.copy1' completed			VD copy from 'ESX/Server2' to 'ESX/Server2.copy1' completed	3502	System	Array ( [ControllerId] => 0 [Source] => ESX/Server2 [Target] => ESX/Server2.copy1 )	s:143:"D0D6063F8041295422FE000155F23DED6860234023000000227B000155EB1351\|PSev:2\|Time:20101225152507.000000+000\|SysName:2000001517AAAE54\|Seq:208\|Ctrlr:0";
38	2010-12-25 15:28:19	Action 'Rename' on 'Server2.copy1' by user 'admin'	Virtual Drive	227B000155EB1351	Info	Application	Action 'Rename' on 'Server2.copy1' by user 'admin', with output of: 'Virtual drive has been renamed to: Server3. '. Warning: 'None.'			Action 'Rename' on 'Server2.copy1' by user 'admin'	503	admin	Array ( [label] => Rename [component] => Server2.copy1 [return] => Virtual drive has been renamed to: Server3. [userWarning] => None. [AliasName] => Server2.copy1 )
39	2010-12-25 15:28:20	Virtual Drive 'Server3' settings have been changed	Virtual Drive	227B000155EB1351	Info	Storage	Storage Pool 'ESX' Virtual Drive 'Server3' settings have been changed through a user command	Settings		Virtual Drive 'Server3' settings have been changed	120	System	Array ( [ControllerId] => 0 [AliasName] => Server3 [PreviousAliasName] => Server2.copy1 [parent] => ESX )	s:143:"000000000000000000000000000000000000000000000000227B000155EB1351\|PSev:2\|Time:20101225152819.000000+000\|SysName:2000001517AAAE54\|Seq:211\|Ctrlr:0";
40	2010-12-25 15:29:24	Action 'Assign' on 'Server3' by user 'admin'	Virtual Drive	227B000155EB1351	Info	Application	Action 'Assign' on 'Server3' by user 'admin', with output of: 'Virtual drive Server3 assigned to Server 3 (drive position 0) successfully'. Warning: 'None.'			Action 'Assign' on 'Server3' by user 'admin'	503	admin	Array ( [label] => Assign [component] => Server3 [return] => Virtual drive Server3 assigned to Server 3 (drive position 0) successfully [userWarning] => None. [AliasName] => Server3 )
41	2010-12-25 15:30:22	Action 'Assign' on 'Server1' by user 'admin'	Virtual Drive	22320001558DE6E1	Info	Application	Action 'Assign' on 'Server1' by user 'admin', with output of: 'Virtual drive Server1 unassigned from Server 1 (drive position 0) successfully'. Warning: 'None.'			Action 'Assign' on 'Server1' by user 'admin'	503	admin	Array ( [label] => Assign [component] => Server1 [return] => Virtual drive Server1 unassigned from Server 1 (drive position 0) successfully [userWarning] => None. [AliasName] => Server1 )
42	2010-12-25 15:30:46	Action 'Assign' on 'Server2' by user 'admin'	Virtual Drive	22FE000155F23DED	Info	Application	Action 'Assign' on 'Server2' by user 'admin', with output of: 'Virtual drive Server2 assigned to Server 1 (drive position 0) successfullyVirtual drive Server2 unassigned from Server 2 (drive position 0) successfully'. Warning: 'None.'			Action 'Assign' on 'Server2' by user 'admin'	503	admin	Array ( [label] => Assign [component] => Server2 [return] => Virtual drive Server2 assigned to Server 1 (drive position 0) successfullyVirtual drive Server2 unassigned from Server 2 (drive position 0) successfully [userWarning] => None. [AliasName] => Server2 )
43	2010-12-25 15:32:11	Server Power Up	Server 1		Info	IPMI	Sensor: Power Unit Status - Server 1 power unit is on.	Server Sensor: Power Unit Status; This is due to one of the following: 1) pushing the power button on the server front panel; 2) Power On Action from the Graphical User Interface; 3) ACPI Event (wakeup on lan, etc).	No action is required	Server Power Up	2011	System	Array ( [snsrnum] => 1 [number] => 1 [generator] => 30 [snsrName] => Power Unit Status [assert] => Deasserted [verb] => was [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:3000 Num:01 Type:09 EDir:ef ED1:00 ED2:ff ED3:ff";
44	2010-12-25 15:32:12	Action 'Power On' on 'Server 1' by user 'admin'	Server 1		Info	Application	Action 'Power On' on 'Server 1' by user 'admin', with output of: 'Server 1 is now powered on.'. Warning: 'None.'			Action 'Power On' on 'Server 1' by user 'admin'	503	admin	Array ( [label] => Power On [component] => Server 1 [return] => Server 1 is now powered on. [userWarning] => None. [AliasName] => Server 1 )
45	2010-12-25 15:32:25	KVM Session sensor - Session Ended Normally	Server 1		Info	IPMI	Sensor: KVM Session sensor - Session Ended Normally.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Ended Normally	2042	System	Array ( [snsrnum] => 71 [number] => 1 [generator] => 30 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 02 )	s:68:"Raw IPMI (hex): Gen:3000 Num:71 Type:c0 EDir:70 ED1:02 ED2:ff ED3:ff";
46	2010-12-25 15:32:29	Action 'Terminate KVM Session' on 'Server 1' by user 'admin'	Server 1		Info	Application	Action 'Terminate KVM Session' on 'Server 1' by user 'admin', with output of: 'KVM Session Shutdown Complete.'. Warning: 'None.'			Action 'Terminate KVM Session' on 'Server 1' by user 'admin'	503	admin	Array ( [label] => Terminate KVM Session [component] => Server 1 [return] => KVM Session Shutdown Complete. [userWarning] => None. [AliasName] => Server 1 )
47	2010-12-25 15:32:51	KVM Session sensor - Session Pending	Server 1		Info	IPMI	Sensor: KVM Session sensor - Session Pending.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Pending	2040	System	Array ( [snsrnum] => 71 [number] => 1 [generator] => 30 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:3000 Num:71 Type:c0 EDir:70 ED1:00 ED2:ff ED3:ff";
48	2010-12-25 15:32:52	KVM Session sensor - Session Established	Server 1		Info	IPMI	Sensor: KVM Session sensor - Session Established.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Established	2041	System	Array ( [snsrnum] => 71 [number] => 1 [generator] => 30 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 01 )	s:68:"Raw IPMI (hex): Gen:3000 Num:71 Type:c0 EDir:70 ED1:01 ED2:ff ED3:ff";
49	2010-12-25 15:33:13	KVM Session sensor - Session Ended Normally	Server 1		Info	IPMI	Sensor: KVM Session sensor - Session Ended Normally.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Ended Normally	2042	System	Array ( [snsrnum] => 71 [number] => 1 [generator] => 30 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 02 )	s:68:"Raw IPMI (hex): Gen:3000 Num:71 Type:c0 EDir:70 ED1:02 ED2:ff ED3:ff";
50	2010-12-25 15:33:33	KVM Session sensor - Session Pending	Server 1		Info	IPMI	Sensor: KVM Session sensor - Session Pending.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Pending	2040	System	Array ( [snsrnum] => 71 [number] => 1 [generator] => 30 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:3000 Num:71 Type:c0 EDir:70 ED1:00 ED2:ff ED3:ff";
51	2010-12-25 15:33:34	KVM Session sensor - Session Established	Server 1		Info	IPMI	Sensor: KVM Session sensor - Session Established.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Established	2041	System	Array ( [snsrnum] => 71 [number] => 1 [generator] => 30 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 01 )	s:68:"Raw IPMI (hex): Gen:3000 Num:71 Type:c0 EDir:70 ED1:01 ED2:ff ED3:ff";
55	2010-12-25 15:35:29	Action 'Reset' on 'Server 1' by user 'admin'	Server 1		Info	Application	Action 'Reset' on 'Server 1' by user 'admin', with output of: 'Reset requested for Server 1.'. Warning: 'None.'			Action 'Reset' on 'Server 1' by user 'admin'	503	admin	Array ( [label] => Reset [component] => Server 1 [return] => Reset requested for Server 1. [userWarning] => None. [AliasName] => Server 1 )
57	2010-12-25 15:37:13	Action 'Reset' on 'Server 1' by user 'admin'	Server 1		Info	Application	Action 'Reset' on 'Server 1' by user 'admin', with output of: 'Reset requested for Server 1.'. Warning: 'None.'			Action 'Reset' on 'Server 1' by user 'admin'	503	admin	Array ( [label] => Reset [component] => Server 1 [return] => Reset requested for Server 1. [userWarning] => None. [AliasName] => Server 1 )
69	2010-12-25 15:55:28	Action 'Power On' on 'Server 3' by user 'admin'	Server 3		Info	Application	Action 'Power On' on 'Server 3' by user 'admin', with output of: 'Server 3 is now powered on.'. Warning: 'None.'			Action 'Power On' on 'Server 3' by user 'admin'	503	admin	Array ( [label] => Power On [component] => Server 3 [return] => Server 3 is now powered on. [userWarning] => None. [AliasName] => Server 3 )
70	2010-12-25 15:55:28	Server Power Up	Server 3		Info	IPMI	Sensor: Power Unit Status - Server 3 power unit is on.	Server Sensor: Power Unit Status; This is due to one of the following: 1) pushing the power button on the server front panel; 2) Power On Action from the Graphical User Interface; 3) ACPI Event (wakeup on lan, etc).	No action is required	Server Power Up	2011	System	Array ( [snsrnum] => 1 [number] => 3 [generator] => 34 [snsrName] => Power Unit Status [assert] => Deasserted [verb] => was [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:3400 Num:01 Type:09 EDir:ef ED1:00 ED2:ff ED3:ff";
71	2010-12-25 15:55:54	KVM Session sensor - Session Pending	Server 3		Info	IPMI	Sensor: KVM Session sensor - Session Pending.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Pending	2040	System	Array ( [snsrnum] => 71 [number] => 3 [generator] => 34 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:3400 Num:71 Type:c0 EDir:70 ED1:00 ED2:ff ED3:ff";
72	2010-12-25 15:55:55	KVM Session sensor - Session Established	Server 3		Info	IPMI	Sensor: KVM Session sensor - Session Established.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Established	2041	System	Array ( [snsrnum] => 71 [number] => 3 [generator] => 34 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 01 )	s:68:"Raw IPMI (hex): Gen:3400 Num:71 Type:c0 EDir:70 ED1:01 ED2:ff ED3:ff";
79	2010-12-25 16:23:51	Server Power Off	Server 1		Info	IPMI	Sensor: Power Unit Status - Server 1 power unit is off.	Server Sensor: Power Unit Status; This is due to one of the following: 1) pushing the power button on the server front panel; 2) Power Off Action from the Graphical User Interface; 3) ACPI Power Down request from the host operating system; 4) Power loss.	No action is required	Server Power Off	2010	System	Array ( [snsrnum] => 1 [number] => 1 [generator] => 30 [snsrName] => Power Unit Status [assert] => Asserted [verb] => is [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:3000 Num:01 Type:09 EDir:6f ED1:00 ED2:ff ED3:ff";
80	2010-12-25 16:23:52	Action 'Power Off' on 'Server 1' by user 'admin'	Server 1		Info	Application	Action 'Power Off' on 'Server 1' by user 'admin', with output of: 'Server 1 is now powered off.'. Warning: 'None.'			Action 'Power Off' on 'Server 1' by user 'admin'	503	admin	Array ( [label] => Power Off [component] => Server 1 [return] => Server 1 is now powered off. [userWarning] => None. [AliasName] => Server 1 )
87	2010-12-25 16:27:29	Action 'Assign' on 'Server2' by user 'admin'	Virtual Drive	22FE000155F23DED	Info	Application	Action 'Assign' on 'Server2' by user 'admin', with output of: 'Virtual drive Server2 unassigned from Server 1 (drive position 0) successfullyVirtual drive Server2 assigned to Server 2 (drive position 0) successfully'. Warning: 'None.'			Action 'Assign' on 'Server2' by user 'admin'	503	admin	Array ( [label] => Assign [component] => Server2 [return] => Virtual drive Server2 unassigned from Server 1 (drive position 0) successfullyVirtual drive Server2 assigned to Server 2 (drive position 0) successfully [userWarning] => None. [AliasName] => Server2 )
88	2010-12-25 16:27:45	Action 'Assign' on 'Server1' by user 'admin'	Virtual Drive	22320001558DE6E1	Info	Application	Action 'Assign' on 'Server1' by user 'admin', with output of: 'Virtual drive Server1 assigned to Server 1 (drive position 0) successfully'. Warning: 'None.'			Action 'Assign' on 'Server1' by user 'admin'	503	admin	Array ( [label] => Assign [component] => Server1 [return] => Virtual drive Server1 assigned to Server 1 (drive position 0) successfully [userWarning] => None. [AliasName] => Server1 )
89	2010-12-25 16:30:29	KVM Session sensor - Session Ended Normally	Server 1		Info	IPMI	Sensor: KVM Session sensor - Session Ended Normally.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Ended Normally	2042	System	Array ( [snsrnum] => 71 [number] => 1 [generator] => 30 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 02 )	s:68:"Raw IPMI (hex): Gen:3000 Num:71 Type:c0 EDir:70 ED1:02 ED2:ff ED3:ff";
90	2010-12-25 16:30:32	Action 'Power On/Off Multiple Servers' on 'Server 1' by user 'admin'	Server 1		Info	Application	Action 'Power On/Off Multiple Servers' on 'Server 1' by user 'admin', with output of: 'Server 1 is now powered on.Server 2 is now powered on.'. Warning: 'None.'			Action 'Power On/Off Multiple Servers' on 'Server 1' by user 'admin'	503	admin	Array ( [label] => Power On/Off Multiple Servers [component] => Server 1 [return] => Server 1 is now powered on.Server 2 is now powered on. [userWarning] => None. [AliasName] => Server 1 )
91	2010-12-25 16:30:31	Server Power Up	Server 1		Info	IPMI	Sensor: Power Unit Status - Server 1 power unit is on.	Server Sensor: Power Unit Status; This is due to one of the following: 1) pushing the power button on the server front panel; 2) Power On Action from the Graphical User Interface; 3) ACPI Event (wakeup on lan, etc).	No action is required	Server Power Up	2011	System	Array ( [snsrnum] => 1 [number] => 1 [generator] => 30 [snsrName] => Power Unit Status [assert] => Deasserted [verb] => was [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:3000 Num:01 Type:09 EDir:ef ED1:00 ED2:ff ED3:ff";
92	2010-12-25 16:30:33	Server Power Up	Server 2		Info	IPMI	Sensor: Power Unit Status - Server 2 power unit is on.	Server Sensor: Power Unit Status; This is due to one of the following: 1) pushing the power button on the server front panel; 2) Power On Action from the Graphical User Interface; 3) ACPI Event (wakeup on lan, etc).	No action is required	Server Power Up	2011	System	Array ( [snsrnum] => 1 [number] => 2 [generator] => 32 [snsrName] => Power Unit Status [assert] => Deasserted [verb] => was [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:3200 Num:01 Type:09 EDir:ef ED1:00 ED2:ff ED3:ff";
93	2010-12-25 16:31:05	KVM Session sensor - Session Pending	Server 1		Info	IPMI	Sensor: KVM Session sensor - Session Pending.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Pending	2040	System	Array ( [snsrnum] => 71 [number] => 1 [generator] => 30 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:3000 Num:71 Type:c0 EDir:70 ED1:00 ED2:ff ED3:ff";
94	2010-12-25 16:31:08	KVM Session sensor - Session Established	Server 1		Info	IPMI	Sensor: KVM Session sensor - Session Established.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Established	2041	System	Array ( [snsrnum] => 71 [number] => 1 [generator] => 30 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 01 )	s:68:"Raw IPMI (hex): Gen:3000 Num:71 Type:c0 EDir:70 ED1:01 ED2:ff ED3:ff";
95	2010-12-25 16:31:21	KVM Session sensor - Session Pending	Server 2		Info	IPMI	Sensor: KVM Session sensor - Session Pending.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Pending	2040	System	Array ( [snsrnum] => 71 [number] => 2 [generator] => 32 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:3200 Num:71 Type:c0 EDir:70 ED1:00 ED2:ff ED3:ff";
96	2010-12-25 16:31:23	KVM Session sensor - Session Established	Server 2		Info	IPMI	Sensor: KVM Session sensor - Session Established.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Established	2041	System	Array ( [snsrnum] => 71 [number] => 2 [generator] => 32 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 01 )	s:68:"Raw IPMI (hex): Gen:3200 Num:71 Type:c0 EDir:70 ED1:01 ED2:ff ED3:ff";
107	2010-12-25 16:57:38	KVM Session sensor - Session Ended Normally	Server 1		Info	IPMI	Sensor: KVM Session sensor - Session Ended Normally.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Ended Normally	2042	System	Array ( [snsrnum] => 71 [number] => 1 [generator] => 30 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 02 )	s:68:"Raw IPMI (hex): Gen:3000 Num:71 Type:c0 EDir:70 ED1:02 ED2:ff ED3:ff";
108	2010-12-25 16:57:40	KVM Session sensor - Session Ended Normally	Server 2		Info	IPMI	Sensor: KVM Session sensor - Session Ended Normally.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Ended Normally	2042	System	Array ( [snsrnum] => 71 [number] => 2 [generator] => 32 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 02 )	s:68:"Raw IPMI (hex): Gen:3200 Num:71 Type:c0 EDir:70 ED1:02 ED2:ff ED3:ff";
109	2010-12-25 16:57:50	KVM Session sensor - Session Ended Normally	Server 3		Info	IPMI	Sensor: KVM Session sensor - Session Ended Normally.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Ended Normally	2042	System	Array ( [snsrnum] => 71 [number] => 3 [generator] => 34 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 02 )	s:68:"Raw IPMI (hex): Gen:3400 Num:71 Type:c0 EDir:70 ED1:02 ED2:ff ED3:ff";
110	2010-12-26 08:38:07	Storage Controller '2' detected	Storage Controller 2		Info	IPMI	A Storage Controller was detected in slot SCM 2.		No action is required	Storage Controller '2' detected	1007	System	Array ( [number] => 2 )	s:68:"Raw IPMI (hex): Gen:2000 Num:63 Type:c0 EDir:6f ED1:00 ED2:ff ED3:ff";
113	2010-12-26 08:39:36	Fault Indication: SCM 1 Fault LED Off	Storage Controller 1		Info	IPMI	Sensor: Fault Indication; The Storage Control Module 1 fault LED has been turned off. This amber LED is located on the faceplate of the SCM and is used to warn of conditions that require attention. All conditions contributing to a a previous fault condition on the SCM have been cleared.	Chassis Sensor: Fault Indication	No action is required	Fault Indication: SCM 1 Fault LED Off	1607	System	Array ( [snsrnum] => 5b [number] => 1 [generator] => 20 [snsrName] => Fault Indication [enabled] => Disabled [assert] => Deasserted [verb] => was [offset] => 08 [lit] => off )	s:68:"Raw IPMI (hex): Gen:2000 Num:5b Type:c0 EDir:ef ED1:08 ED2:ff ED3:ff";
114	2010-12-26 08:39:38	Fault Indication: Chassis Fault LED Off	Chassis		Info	IPMI	Sensor: Fault Indication; The Chassis Fault LED has been turned Off. This amber LED is located on the front of the chassis and is used to warn of conditions that require attention. All conditions contributing to a previous fault condition have been cleared.	Chassis Sensor: Fault Indication	No action is required	Fault Indication: Chassis Fault LED Off	1603	System	Array ( [snsrnum] => 5b [number] => 1 [generator] => 20 [snsrName] => Fault Indication [enabled] => Disabled [assert] => Deasserted [verb] => was [offset] => 01 [lit] => off )	s:68:"Raw IPMI (hex): Gen:2000 Num:5b Type:c0 EDir:ef ED1:01 ED2:ff ED3:ff";
119	2010-12-26 08:39:49	Battery detected	Storage Controller 2		Info	Storage	Battery detected.		No action is required	Battery detected	13	System	Array ( [ControllerId] => 1 [CurrentTemp] => Unknown [ThresholdTemp] => Unknown )	s:143:"0000000000000000000000000000000000000000000000000000000000000000\|PSev:2\|Time:20101226083938.000000+000\|SysName:2000001517AAAE54\|Seq:242\|Ctrlr:1";
120	2010-12-26 08:39:50	Battery capacity is normal	Storage Controller 2		Info	Storage	Battery capacity is normal	Battery capacity is normal	No action required	Battery capacity is normal	4	System	Array ( [ControllerId] => 1 [CurrentTemp] => Unknown [ThresholdTemp] => Unknown )	s:143:"1E0C271000000000000000000000000000000000000000000000000000000000\|PSev:2\|Time:20101226083939.000000+000\|SysName:2000001517AAAE54\|Seq:243\|Ctrlr:1";
122	2010-12-26 08:39:56	Storage subsystem controllers are redundant	Storage Subsystem		Info	Storage	The Storage subsystem has changed from a configuration of a single non-redundant controller to a redundant controller pair.	The partner controller that was offline is now online and has completed joining this controller to make the storage subsystem redundant.	None.	Storage subsystem controllers are redundant	3428	System	Array ( [ControllerId] => 0 )	s:143:"0100010000000000000000000000000000000000000000002000001517AA0055\|PSev:2\|Time:20101226083932.000000+000\|SysName:2000001517AAAE54\|Seq:239\|Ctrlr:0";
127	2010-12-26 08:40:07	Storage Controller Operational	Storage Controller 2		Info	System	The storage controller is operational.	Power up, reset, insertion, or CMM startup		Storage Controller Operational	240	System
128	2010-12-26 08:52:37	Action 'Delete' on 'HyperV' by user 'admin'	Virtual Drive	22F30001559A58F6	Info	Application	Action 'Delete' on 'HyperV' by user 'admin', with output of: 'Virtual drive HyperV deleted.'. Warning: 'None.'			Action 'Delete' on 'HyperV' by user 'admin'	503	admin	Array ( [label] => Delete [component] => HyperV [return] => Virtual drive HyperV deleted. [userWarning] => None. [AliasName] => HyperV )
129	2010-12-26 08:52:38	Virtual drive 'HyperV' has been deleted	Virtual Drive	22F30001559A58F6	Info	Storage	Virtual drive 'HyperV' has been deleted from storage pool 'VMs'.			Virtual drive 'HyperV' has been deleted	114	System	Array ( [ControllerId] => 0 [AliasName] => HyperV [PreviousAliasName] => Unknown [parent] => VMs )	s:143:"00000000000000000000000000000000000000000000000022F30001559A58F6\|PSev:2\|Time:20101226085236.000000+000\|SysName:2000001517AAAE54\|Seq:249\|Ctrlr:0";
130	2010-12-26 08:53:10	Synchronization is started	Storage Subsystem	22D9000155B9904D	Info	Storage	Synchronization is started	The virtual drive is created	No action is required	Synchronization is started	205	System	Array ( [ControllerId] => 0 )	s:143:"00000000000000000000000000000000000000000000000022D9000155B9904D\|PSev:2\|Time:20101226085308.000000+000\|SysName:2000001517AAAE54\|Seq:251\|Ctrlr:0";
131	2010-12-26 08:53:10	Virtual drive 'Daten' has been created	Virtual Drive	22D9000155B9904D	Info	Storage	Virtual drive 'Daten' has been created in storage pool 'VMs'.			Virtual drive 'Daten' has been created	113	System	Array ( [ControllerId] => 0 [AliasName] => Daten [PreviousAliasName] => Unknown [parent] => VMs )	s:143:"00000000000000000000000000000000000000000000000022D9000155B9904D\|PSev:2\|Time:20101226085308.000000+000\|SysName:2000001517AAAE54\|Seq:250\|Ctrlr:0";
132	2010-12-26 08:53:12	Virtual drive initialization has started	Storage Subsystem	22D9000155B9904D	Info	Storage	Virtual drive initialization has started			Virtual drive initialization has started	104	System	Array ( [ControllerId] => 0 )	s:143:"00000000000000000000000000000000000000000000000022D9000155B9904D\|PSev:2\|Time:20101226085311.000000+000\|SysName:2000001517AAAE54\|Seq:252\|Ctrlr:0";
134	2010-12-26 08:53:14	Action 'Create Virtual Drive' on 'VMs' by user 'admin'	Storage Pool	7B086B0100000100	Info	Application	Action 'Create Virtual Drive' on 'VMs' by user 'admin', with output of: 'Virtual drive Daten has been created successfully. Boot sector initialization task has been started successfully. Virtual Drive Daten has been assigned to server 1 (Drive position 1) successfully.Virtual Drive Daten has been assigned to server 2 (Drive position 1) successfully.Virtual Drive Daten has been assigned to server 3 (Drive position 1) successfully.The boot sector initialization task may take up to 30 seconds to complete. You can monitor the progress of the initialization task in the Background Tasks tab for this virtual drive. To tell when the task has completed, look for the Virtual drive initialization has completed event in the Events tab.'. Warning: ''			Action 'Create Virtual Drive' on 'VMs' by user 'admin'	503	admin	Array ( [label] => Create Virtual Drive [component] => VMs [return] => Virtual drive Daten has been created successfully. Boot sector initialization task has been started successfully. Virtual Drive Daten has been assigned to server 1 (Drive position 1) successfully.Virtual Drive Daten has been assigned to server 2 (Drive position 1) successfully.Virtual Drive Daten has been assigned to server 3 (Drive position 1) successfully.The boot sector initialization task may take up to 30 seconds to complete. You can monitor the progress of the initialization task in the Background Tasks tab for this virtual drive. To tell when the task has completed, look for the Virtual drive initialization has completed event in the Events tab. [userWarning] => [AliasName] => VMs )
135	2010-12-26 08:53:19	Virtual drive initialization has completed	Storage Subsystem	22D9000155B9904D	Info	Storage	Virtual drive initialization has completed			Virtual drive initialization has completed	105	System	Array ( [ControllerId] => 0 )	s:143:"00000000000000000000000000000000000000000000000022D9000155B9904D\|PSev:2\|Time:20101226085318.000000+000\|SysName:2000001517AAAE54\|Seq:254\|Ctrlr:0";
139	2010-12-26 08:57:55	KVM Session sensor - Session Pending	Server 3		Info	IPMI	Sensor: KVM Session sensor - Session Pending.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Pending	2040	System	Array ( [snsrnum] => 71 [number] => 3 [generator] => 34 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:3400 Num:71 Type:c0 EDir:70 ED1:00 ED2:ff ED3:ff";
140	2010-12-26 08:57:56	KVM Session sensor - Session Established	Server 3		Info	IPMI	Sensor: KVM Session sensor - Session Established.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Established	2041	System	Array ( [snsrnum] => 71 [number] => 3 [generator] => 34 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 01 )	s:68:"Raw IPMI (hex): Gen:3400 Num:71 Type:c0 EDir:70 ED1:01 ED2:ff ED3:ff";
141	2010-12-26 08:59:44	Action 'Reset' on 'Server 3' by user 'admin'	Server 3		Info	Application	Action 'Reset' on 'Server 3' by user 'admin', with output of: 'Reset requested for Server 3.'. Warning: 'None.'			Action 'Reset' on 'Server 3' by user 'admin'	503	admin	Array ( [label] => Reset [component] => Server 3 [return] => Reset requested for Server 3. [userWarning] => None. [AliasName] => Server 3 )
148	2010-12-26 09:02:43	Action 'Reset' on 'Server 3' by user 'admin'	Server 3		Info	Application	Action 'Reset' on 'Server 3' by user 'admin', with output of: 'Reset requested for Server 3.'. Warning: 'None.'			Action 'Reset' on 'Server 3' by user 'admin'	503	admin	Array ( [label] => Reset [component] => Server 3 [return] => Reset requested for Server 3. [userWarning] => None. [AliasName] => Server 3 )
155	2010-12-26 09:04:57	Action 'Reset' on 'Server 3' by user 'admin'	Server 3		Info	Application	Action 'Reset' on 'Server 3' by user 'admin', with output of: 'Reset requested for Server 3.'. Warning: 'None.'			Action 'Reset' on 'Server 3' by user 'admin'	503	admin	Array ( [label] => Reset [component] => Server 3 [return] => Reset requested for Server 3. [userWarning] => None. [AliasName] => Server 3 )
166	2010-12-26 09:15:13	Action 'Initialize Boot Sector' on 'Server3' by user 'admin'	Virtual Drive	227B000155EB1351	Info	Application	Action 'Initialize Boot Sector' on 'Server3' by user 'admin', with output of: 'Initialization of virtual drive Server3 has startedPlease wait a few minutes for Virtual Drive Initialization to complete before attempting to install software on this drive. '. Warning: 'Warning—This can result in loss of data. Make sure this virtual drive contains nothing useful.'			Action 'Initialize Boot Sector' on 'Server3' by user 'admin'	503	admin	Array ( [label] => Initialize Boot Sector [component] => Server3 [return] => Initialization of virtual drive Server3 has startedPlease wait a few minutes for Virtual Drive Initialization to complete before attempting to install software on this drive. [userWarning] => Warning—This can result in loss of data. Make sure this virtual drive contains nothing useful. [AliasName] => Server3 )
167	2010-12-26 09:15:14	Virtual drive initialization has started	Storage Subsystem	227B000155EB1351	Info	Storage	Virtual drive initialization has started			Virtual drive initialization has started	104	System	Array ( [ControllerId] => 0 )	s:143:"000000000000000000000000000000000000000000000000227B000155EB1351\|PSev:2\|Time:20101226091512.000000+000\|SysName:2000001517AAAE54\|Seq:274\|Ctrlr:0";
168	2010-12-26 09:15:27	Action 'Initialize Boot Sector' on 'Server2' by user 'admin'	Virtual Drive	22FE000155F23DED	Info	Application	Action 'Initialize Boot Sector' on 'Server2' by user 'admin', with output of: 'Initialization of virtual drive Server2 has startedPlease wait a few minutes for Virtual Drive Initialization to complete before attempting to install software on this drive. '. Warning: 'Warning—This can result in loss of data. Make sure this virtual drive contains nothing useful.'			Action 'Initialize Boot Sector' on 'Server2' by user 'admin'	503	admin	Array ( [label] => Initialize Boot Sector [component] => Server2 [return] => Initialization of virtual drive Server2 has startedPlease wait a few minutes for Virtual Drive Initialization to complete before attempting to install software on this drive. [userWarning] => Warning—This can result in loss of data. Make sure this virtual drive contains nothing useful. [AliasName] => Server2 )
169	2010-12-26 09:15:29	Virtual Drive Initialization is queued	Storage Subsystem	22FE000155F23DED	Info	Storage	Virtual Drive Initialization is queued			Virtual Drive Initialization is queued	111	System	Array ( [ControllerId] => 0 )	s:143:"00000000000000000000000000000000000000000000000022FE000155F23DED\|PSev:2\|Time:20101226091526.000000+000\|SysName:2000001517AAAE54\|Seq:275\|Ctrlr:0";
170	2010-12-26 09:15:29	Virtual drive initialization has completed	Storage Subsystem	227B000155EB1351	Info	Storage	Virtual drive initialization has completed			Virtual drive initialization has completed	105	System	Array ( [ControllerId] => 0 )	s:143:"000000000000000000000000000000000000000000000000227B000155EB1351\|PSev:2\|Time:20101226091527.000000+000\|SysName:2000001517AAAE54\|Seq:276\|Ctrlr:0";
171	2010-12-26 09:15:31	Virtual drive initialization has started	Storage Subsystem	22FE000155F23DED	Info	Storage	Virtual drive initialization has started			Virtual drive initialization has started	104	System	Array ( [ControllerId] => 0 )	s:143:"00000000000000000000000000000000000000000000000022FE000155F23DED\|PSev:2\|Time:20101226091528.000000+000\|SysName:2000001517AAAE54\|Seq:277\|Ctrlr:0";
172	2010-12-26 09:15:43	Action 'Initialize Boot Sector' on 'Server1' by user 'admin'	Virtual Drive	22320001558DE6E1	Info	Application	Action 'Initialize Boot Sector' on 'Server1' by user 'admin', with output of: 'Initialization of virtual drive Server1 has startedPlease wait a few minutes for Virtual Drive Initialization to complete before attempting to install software on this drive. '. Warning: 'Warning—This can result in loss of data. Make sure this virtual drive contains nothing useful.'			Action 'Initialize Boot Sector' on 'Server1' by user 'admin'	503	admin	Array ( [label] => Initialize Boot Sector [component] => Server1 [return] => Initialization of virtual drive Server1 has startedPlease wait a few minutes for Virtual Drive Initialization to complete before attempting to install software on this drive. [userWarning] => Warning—This can result in loss of data. Make sure this virtual drive contains nothing useful. [AliasName] => Server1 )
173	2010-12-26 09:15:45	Virtual Drive Initialization is queued	Storage Subsystem	22320001558DE6E1	Info	Storage	Virtual Drive Initialization is queued			Virtual Drive Initialization is queued	111	System	Array ( [ControllerId] => 0 )	s:143:"00000000000000000000000000000000000000000000000022320001558DE6E1\|PSev:2\|Time:20101226091542.000000+000\|SysName:2000001517AAAE54\|Seq:279\|Ctrlr:0";
174	2010-12-26 09:15:45	Virtual drive initialization has completed	Storage Subsystem	22FE000155F23DED	Info	Storage	Virtual drive initialization has completed			Virtual drive initialization has completed	105	System	Array ( [ControllerId] => 0 )	s:143:"00000000000000000000000000000000000000000000000022FE000155F23DED\|PSev:2\|Time:20101226091542.000000+000\|SysName:2000001517AAAE54\|Seq:278\|Ctrlr:0";
175	2010-12-26 09:15:46	Virtual drive initialization has started	Storage Subsystem	22320001558DE6E1	Info	Storage	Virtual drive initialization has started			Virtual drive initialization has started	104	System	Array ( [ControllerId] => 0 )	s:143:"00000000000000000000000000000000000000000000000022320001558DE6E1\|PSev:2\|Time:20101226091542.000000+000\|SysName:2000001517AAAE54\|Seq:280\|Ctrlr:0";
176	2010-12-26 09:15:58	Virtual drive initialization has completed	Storage Subsystem	22320001558DE6E1	Info	Storage	Virtual drive initialization has completed			Virtual drive initialization has completed	105	System	Array ( [ControllerId] => 0 )	s:143:"00000000000000000000000000000000000000000000000022320001558DE6E1\|PSev:2\|Time:20101226091557.000000+000\|SysName:2000001517AAAE54\|Seq:281\|Ctrlr:0";
177	2010-12-26 09:16:04	Action 'Reset' on 'Server 3' by user 'admin'	Server 3		Info	Application	Action 'Reset' on 'Server 3' by user 'admin', with output of: 'Reset requested for Server 3.'. Warning: 'None.'			Action 'Reset' on 'Server 3' by user 'admin'	503	admin	Array ( [label] => Reset [component] => Server 3 [return] => Reset requested for Server 3. [userWarning] => None. [AliasName] => Server 3 )
188	2010-12-26 09:28:23	Synchronization is completed	Storage Subsystem	22D9000155B9904D	Info	Storage	Synchronization is completed	Synchronization is completed	No action is required	Synchronization is completed	206	System	Array ( [ControllerId] => 0 )	s:143:"00000000000000000000000000000000000000000000000022D9000155B9904D\|PSev:2\|Time:20101226092821.000000+000\|SysName:2000001517AAAE54\|Seq:290\|Ctrlr:0";
191	2010-12-26 09:36:02	Action 'Reset' on 'Server 1' by user 'admin'	Server 1		Info	Application	Action 'Reset' on 'Server 1' by user 'admin', with output of: 'Reset requested for Server 1.'. Warning: 'None.'			Action 'Reset' on 'Server 1' by user 'admin'	503	admin	Array ( [label] => Reset [component] => Server 1 [return] => Reset requested for Server 1. [userWarning] => None. [AliasName] => Server 1 )
206	2010-12-26 09:40:22	KVM Session sensor - Session Ended Normally	Server 3		Info	IPMI	Sensor: KVM Session sensor - Session Ended Normally.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Ended Normally	2042	System	Array ( [snsrnum] => 71 [number] => 3 [generator] => 34 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 02 )	s:68:"Raw IPMI (hex): Gen:3400 Num:71 Type:c0 EDir:70 ED1:02 ED2:ff ED3:ff";
207	2010-12-26 09:42:18	KVM Session sensor - Session Pending	Server 1		Info	IPMI	Sensor: KVM Session sensor - Session Pending.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Pending	2040	System	Array ( [snsrnum] => 71 [number] => 1 [generator] => 30 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:3000 Num:71 Type:c0 EDir:70 ED1:00 ED2:ff ED3:ff";
208	2010-12-26 09:42:19	KVM Session sensor - Session Established	Server 1		Info	IPMI	Sensor: KVM Session sensor - Session Established.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Established	2041	System	Array ( [snsrnum] => 71 [number] => 1 [generator] => 30 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 01 )	s:68:"Raw IPMI (hex): Gen:3000 Num:71 Type:c0 EDir:70 ED1:01 ED2:ff ED3:ff";
213	2010-12-26 09:48:42	KVM Session sensor - Session Pending	Server 3		Info	IPMI	Sensor: KVM Session sensor - Session Pending.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Pending	2040	System	Array ( [snsrnum] => 71 [number] => 3 [generator] => 34 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:3400 Num:71 Type:c0 EDir:70 ED1:00 ED2:ff ED3:ff";
214	2010-12-26 09:48:43	KVM Session sensor - Session Established	Server 3		Info	IPMI	Sensor: KVM Session sensor - Session Established.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Established	2041	System	Array ( [snsrnum] => 71 [number] => 3 [generator] => 34 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 01 )	s:68:"Raw IPMI (hex): Gen:3400 Num:71 Type:c0 EDir:70 ED1:01 ED2:ff ED3:ff";
217	2010-12-26 09:55:37	KVM Session sensor - Session Pending	Server 2		Info	IPMI	Sensor: KVM Session sensor - Session Pending.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Pending	2040	System	Array ( [snsrnum] => 71 [number] => 2 [generator] => 32 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:3200 Num:71 Type:c0 EDir:70 ED1:00 ED2:ff ED3:ff";
218	2010-12-26 09:55:39	KVM Session sensor - Session Established	Server 2		Info	IPMI	Sensor: KVM Session sensor - Session Established.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Established	2041	System	Array ( [snsrnum] => 71 [number] => 2 [generator] => 32 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 01 )	s:68:"Raw IPMI (hex): Gen:3200 Num:71 Type:c0 EDir:70 ED1:01 ED2:ff ED3:ff";
219	2010-12-26 09:55:43	Action 'Reset' on 'Server 2' by user 'admin'	Server 2		Info	Application	Action 'Reset' on 'Server 2' by user 'admin', with output of: 'Reset requested for Server 2.'. Warning: 'None.'			Action 'Reset' on 'Server 2' by user 'admin'	503	admin	Array ( [label] => Reset [component] => Server 2 [return] => Reset requested for Server 2. [userWarning] => None. [AliasName] => Server 2 )
238	2010-12-26 10:08:35	Link Up: External: Port 1 has link and should now be active	Switch 1		Info	SNMP	Link Up: External: Port 1 has link and should now be active <br /> Array ( [ifIndex.1] => 1 [ifAdminStatus.1] => up [ifOperStatus.1] => up )			Link Up: External: Port 1 has link and should now be active	3205	System	Array ( [port] => External: Port 1 [portIndex] => 1 [varbinds] => Array ( [ifIndex.1] => 1 [ifAdminStatus.1] => up [ifOperStatus.1] => up ) )
239	2010-12-26 10:08:37	Spanning Tree Port State Forwarding: {port}	Switch 1		Info	SNMP	Spanning Tree Port State Forwarding: {port}<br> Array ( [rndErrorDesc.0] => %STP-W-PORTSTATUS: Ext.1: STP status Forwarding [rndErrorSeverity.0] => warning [rnd.57.2.8.1.0] => 1 [rnd.57.2.8.2.0] => 0 )			Spanning Tree Port State Forwarding: {port}	3561	System	Array ( [port] => [portIndex] => [varbinds] => Array ( [rndErrorDesc.0] => %STP-W-PORTSTATUS: Ext.1: STP status Forwarding [rndErrorSeverity.0] => warning [rnd.57.2.8.1.0] => 1 [rnd.57.2.8.2.0] => 0 ) )
250	2010-12-26 10:30:43	Action 'Reset' on 'Server 1' by user 'admin'	Server 1		Info	Application	Action 'Reset' on 'Server 1' by user 'admin', with output of: 'Reset requested for Server 1.'. Warning: 'None.'			Action 'Reset' on 'Server 1' by user 'admin'	503	admin	Array ( [label] => Reset [component] => Server 1 [return] => Reset requested for Server 1. [userWarning] => None. [AliasName] => Server 1 )
261	2010-12-26 11:40:54	Action 'Reset' on 'Server 1' by user 'admin'	Server 1		Info	Application	Action 'Reset' on 'Server 1' by user 'admin', with output of: 'Reset requested for Server 1.'. Warning: 'None.'			Action 'Reset' on 'Server 1' by user 'admin'	503	admin	Array ( [label] => Reset [component] => Server 1 [return] => Reset requested for Server 1. [userWarning] => None. [AliasName] => Server 1 )
272	2010-12-26 13:28:28	Action 'Initialize Boot Sector' on 'Server3' by user 'admin'	Virtual Drive	227B000155EB1351	Info	Application	Action 'Initialize Boot Sector' on 'Server3' by user 'admin', with output of: 'Initialization of virtual drive Server3 has startedPlease wait a few minutes for Virtual Drive Initialization to complete before attempting to install software on this drive. '. Warning: 'Warning—This can result in loss of data. Make sure this virtual drive contains nothing useful.'			Action 'Initialize Boot Sector' on 'Server3' by user 'admin'	503	admin	Array ( [label] => Initialize Boot Sector [component] => Server3 [return] => Initialization of virtual drive Server3 has startedPlease wait a few minutes for Virtual Drive Initialization to complete before attempting to install software on this drive. [userWarning] => Warning—This can result in loss of data. Make sure this virtual drive contains nothing useful. [AliasName] => Server3 )
273	2010-12-26 13:28:29	Virtual drive initialization has started	Storage Subsystem	227B000155EB1351	Info	Storage	Virtual drive initialization has started			Virtual drive initialization has started	104	System	Array ( [ControllerId] => 0 )	s:143:"000000000000000000000000000000000000000000000000227B000155EB1351\|PSev:2\|Time:20101226132827.000000+000\|SysName:2000001517AAAE54\|Seq:347\|Ctrlr:0";
274	2010-12-26 13:28:44	Virtual drive initialization has completed	Storage Subsystem	227B000155EB1351	Info	Storage	Virtual drive initialization has completed			Virtual drive initialization has completed	105	System	Array ( [ControllerId] => 0 )	s:143:"000000000000000000000000000000000000000000000000227B000155EB1351\|PSev:2\|Time:20101226132842.000000+000\|SysName:2000001517AAAE54\|Seq:348\|Ctrlr:0";
275	2010-12-26 13:28:47	Action 'Reset' on 'Server 3' by user 'admin'	Server 3		Info	Application	Action 'Reset' on 'Server 3' by user 'admin', with output of: 'Reset requested for Server 3.'. Warning: 'None.'			Action 'Reset' on 'Server 3' by user 'admin'	503	admin	Array ( [label] => Reset [component] => Server 3 [return] => Reset requested for Server 3. [userWarning] => None. [AliasName] => Server 3 )
278	2010-12-26 13:29:10	KVM Session sensor - Session Ended Normally	Server 2		Info	IPMI	Sensor: KVM Session sensor - Session Ended Normally.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Ended Normally	2042	System	Array ( [snsrnum] => 71 [number] => 2 [generator] => 32 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 02 )	s:68:"Raw IPMI (hex): Gen:3200 Num:71 Type:c0 EDir:70 ED1:02 ED2:ff ED3:ff";
279	2010-12-26 13:29:13	KVM Session sensor - Session Ended Normally	Server 1		Info	IPMI	Sensor: KVM Session sensor - Session Ended Normally.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Ended Normally	2042	System	Array ( [snsrnum] => 71 [number] => 1 [generator] => 30 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 02 )	s:68:"Raw IPMI (hex): Gen:3000 Num:71 Type:c0 EDir:70 ED1:02 ED2:ff ED3:ff";
288	2010-12-26 13:32:04	OS Booted from HDD device	Server 3		Info	IPMI	The server has booted an OS from a HDD device	Server 3 has booted an OS	No action is required	OS Booted from HDD device	2140	System	Array ( [snsrnum] => 0 [number] => 3 [generator] => 34 [P1] => HDD [snsrName] => OS Boot )	s:68:"Raw IPMI (hex): Gen:3400 Num:00 Type:1f EDir:6f ED1:01 ED2:ff ED3:ff";
299	2010-12-26 13:53:31	OS Booted from HDD device	Server 3		Info	IPMI	The server has booted an OS from a HDD device	Server 3 has booted an OS	No action is required	OS Booted from HDD device	2140	System	Array ( [snsrnum] => 0 [number] => 3 [generator] => 34 [P1] => HDD [snsrName] => OS Boot )	s:68:"Raw IPMI (hex): Gen:3400 Num:00 Type:1f EDir:6f ED1:01 ED2:ff ED3:ff";
300	2010-12-26 13:58:14	OS Graceful shutdown.	Server 3		Info	IPMI	Server 3 has been shutdown and powered off by the operating system.	Shutdown command was initiated through the server Operating System.	No action is necessary.	OS Graceful shutdown.	2150	System	Array ( [snsrnum] => 0 [number] => 3 [generator] => 34 [snsrName] => OS Stop/Shutdown )	s:68:"Raw IPMI (hex): Gen:3400 Num:00 Type:20 EDir:6f ED1:03 ED2:ff ED3:ff";
311	2010-12-26 14:00:45	OS Booted from HDD device	Server 3		Info	IPMI	The server has booted an OS from a HDD device	Server 3 has booted an OS	No action is required	OS Booted from HDD device	2140	System	Array ( [snsrnum] => 0 [number] => 3 [generator] => 34 [P1] => HDD [snsrName] => OS Boot )	s:68:"Raw IPMI (hex): Gen:3400 Num:00 Type:1f EDir:6f ED1:01 ED2:ff ED3:ff";
312	2010-12-26 14:48:38	OS Graceful shutdown.	Server 3		Info	IPMI	Server 3 has been shutdown and powered off by the operating system.	Shutdown command was initiated through the server Operating System.	No action is necessary.	OS Graceful shutdown.	2150	System	Array ( [snsrnum] => 0 [number] => 3 [generator] => 34 [snsrName] => OS Stop/Shutdown )	s:68:"Raw IPMI (hex): Gen:3400 Num:00 Type:20 EDir:6f ED1:03 ED2:ff ED3:ff";
315	2010-12-26 14:48:51	Action 'Power On/Off Multiple Servers' on 'Server 1' by user 'admin'	Server 1		Info	Application	Action 'Power On/Off Multiple Servers' on 'Server 1' by user 'admin', with output of: 'Reset requested for Server 1.Reset requested for Server 2.'. Warning: 'None.'			Action 'Power On/Off Multiple Servers' on 'Server 1' by user 'admin'	503	admin	Array ( [label] => Power On/Off Multiple Servers [component] => Server 1 [return] => Reset requested for Server 1.Reset requested for Server 2. [userWarning] => None. [AliasName] => Server 1 )
336	2010-12-26 14:51:03	OS Booted from HDD device	Server 3		Info	IPMI	The server has booted an OS from a HDD device	Server 3 has booted an OS	No action is required	OS Booted from HDD device	2140	System	Array ( [snsrnum] => 0 [number] => 3 [generator] => 34 [P1] => HDD [snsrName] => OS Boot )	s:68:"Raw IPMI (hex): Gen:3400 Num:00 Type:1f EDir:6f ED1:01 ED2:ff ED3:ff";
345	2010-12-26 15:18:36	KVM Session sensor - Session Ended Normally	Server 3		Info	IPMI	Sensor: KVM Session sensor - Session Ended Normally.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Ended Normally	2042	System	Array ( [snsrnum] => 71 [number] => 3 [generator] => 34 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 02 )	s:68:"Raw IPMI (hex): Gen:3400 Num:71 Type:c0 EDir:70 ED1:02 ED2:ff ED3:ff";
346	2010-12-28 03:00:39	Spare check started.	Storage Subsystem		Info	Storage	Spare check started.	Spare check started either manually by the user or started by SW scheduler	No action required	Spare check started.	269	System	Array ( [ControllerId] => 0 )	s:143:"0000000000000000130000600000000000000000000000001300006000000000\|PSev:2\|Time:20101228030037.000000+000\|SysName:2000001517AAAE54\|Seq:397\|Ctrlr:0";
347	2010-12-28 03:00:39	Spare check completed successfully.	Storage Subsystem		Info	Storage	Spare check completed successfully.		No action required	Spare check completed successfully.	270	System	Array ( [ControllerId] => 0 )	s:143:"000000000000000000000000130000600000000000000000B4DFBA4A84DFBA4A\|PSev:2\|Time:20101228030037.000000+000\|SysName:2000001517AAAE54\|Seq:398\|Ctrlr:0";
348	2010-12-30 06:25:15	Feature Key Trial Ended	Management Module		Info	System	The period of evaluating feature "Intel(R) Modular Server Storage Management Pack" has ended.	Feature evaluation period has ended.	No action is required.	Feature Key Trial Ended	3576	System	Array ( [fID] => 7 [hdr] => Intel(R) Modular Server Storage Management Pack )
349	2010-12-30 06:25:16	Feature Key Trial Ended	Management Module		Info	System	The period of evaluating feature "Intel(R) Modular Server Advanced Management Pack" has ended.	Feature evaluation period has ended.	No action is required.	Feature Key Trial Ended	3576	System	Array ( [fID] => 9 [hdr] => Intel(R) Modular Server Advanced Management Pack )
350	2011-01-01 03:00:39	Media patrol has started	Storage Subsystem		Info	Storage	Media patrol has started	Media patrol starts automatically.	No action required	Media patrol has started	122	System	Array ( [ControllerId] => 0 )	s:143:"0000000000000000000000000000000000000000000000002000001517AA0055\|PSev:2\|Time:20110101030038.000000+000\|SysName:2000001517AAAE54\|Seq:399\|Ctrlr:0";
351	2011-01-01 17:29:36	Media patrol has completed	Storage Subsystem		Info	Storage	Media patrol has completed	Media patrol is performed automatically.	No action required	Media patrol has completed	123	System	Array ( [ControllerId] => 0 )	s:143:"0000000000000000000000000000000000000000000000002000001517AA0055\|PSev:2\|Time:20110101172934.000000+000\|SysName:2000001517AAAE54\|Seq:400\|Ctrlr:0";
352	2011-01-04 03:00:39	Spare check started.	Storage Subsystem		Info	Storage	Spare check started.	Spare check started either manually by the user or started by SW scheduler	No action required	Spare check started.	269	System	Array ( [ControllerId] => 0 )	s:143:"00000000D851943F130000600000000000000000000000001300006000000000\|PSev:2\|Time:20110104030037.000000+000\|SysName:2000001517AAAE54\|Seq:401\|Ctrlr:0";
353	2011-01-04 03:00:39	Spare check completed successfully.	Storage Subsystem		Info	Storage	Spare check completed successfully.		No action required	Spare check completed successfully.	270	System	Array ( [ControllerId] => 0 )	s:143:"000000000000000000000000130000600000000000000000B4DFBA4A84DFBA4A\|PSev:2\|Time:20110104030037.000000+000\|SysName:2000001517AAAE54\|Seq:402\|Ctrlr:0";
354	2011-01-05 14:22:11	OS Graceful shutdown.	Server 3		Info	IPMI	Server 3 has been shutdown and powered off by the operating system.	Shutdown command was initiated through the server Operating System.	No action is necessary.	OS Graceful shutdown.	2150	System	Array ( [snsrnum] => 0 [number] => 3 [generator] => 34 [snsrName] => OS Stop/Shutdown )	s:68:"Raw IPMI (hex): Gen:3400 Num:00 Type:20 EDir:6f ED1:03 ED2:ff ED3:ff";
357	2011-01-05 14:22:17	Server Power Off	Server 3		Info	IPMI	Sensor: Power Unit Status - Server 3 power unit is off.	Server Sensor: Power Unit Status; This is due to one of the following: 1) pushing the power button on the server front panel; 2) Power Off Action from the Graphical User Interface; 3) ACPI Power Down request from the host operating system; 4) Power loss.	No action is required	Server Power Off	2010	System	Array ( [snsrnum] => 1 [number] => 3 [generator] => 34 [snsrName] => Power Unit Status [assert] => Asserted [verb] => is [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:3400 Num:01 Type:09 EDir:6f ED1:00 ED2:ff ED3:ff";
358	2011-01-08 11:02:23	Server Power Up	Server 3		Info	IPMI	Sensor: Power Unit Status - Server 3 power unit is on.	Server Sensor: Power Unit Status; This is due to one of the following: 1) pushing the power button on the server front panel; 2) Power On Action from the Graphical User Interface; 3) ACPI Event (wakeup on lan, etc).	No action is required	Server Power Up	2011	System	Array ( [snsrnum] => 1 [number] => 3 [generator] => 34 [snsrName] => Power Unit Status [assert] => Deasserted [verb] => was [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:3400 Num:01 Type:09 EDir:ef ED1:00 ED2:ff ED3:ff";
359	2011-01-08 11:02:24	Action 'Power On' on 'Server 3' by user 'admin'	Server 3		Info	Application	Action 'Power On' on 'Server 3' by user 'admin', with output of: 'Server 3 is now powered on.'. Warning: 'None.'			Action 'Power On' on 'Server 3' by user 'admin'	503	admin	Array ( [label] => Power On [component] => Server 3 [return] => Server 3 is now powered on. [userWarning] => None. [AliasName] => Server 3 )
368	2011-01-08 11:04:25	OS Booted from HDD device	Server 3		Info	IPMI	The server has booted an OS from a HDD device	Server 3 has booted an OS	No action is required	OS Booted from HDD device	2140	System	Array ( [snsrnum] => 0 [number] => 3 [generator] => 34 [P1] => HDD [snsrName] => OS Boot )	s:68:"Raw IPMI (hex): Gen:3400 Num:00 Type:1f EDir:6f ED1:01 ED2:ff ED3:ff";
369	2011-01-08 11:10:29	KVM Session sensor - Session Pending	Server 3		Info	IPMI	Sensor: KVM Session sensor - Session Pending.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Pending	2040	System	Array ( [snsrnum] => 71 [number] => 3 [generator] => 34 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:3400 Num:71 Type:c0 EDir:70 ED1:00 ED2:ff ED3:ff";
370	2011-01-08 11:10:30	KVM Session sensor - Session Established	Server 3		Info	IPMI	Sensor: KVM Session sensor - Session Established.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Established	2041	System	Array ( [snsrnum] => 71 [number] => 3 [generator] => 34 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 01 )	s:68:"Raw IPMI (hex): Gen:3400 Num:71 Type:c0 EDir:70 ED1:01 ED2:ff ED3:ff";
371	2011-01-08 11:13:22	KVM Session sensor - Session Expired	Server 2		Info	IPMI	Sensor: KVM Session sensor - Session ticket expired.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Expired	2043	System	Array ( [snsrnum] => 71 [number] => 2 [generator] => 32 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 03 )	s:68:"Raw IPMI (hex): Gen:3200 Num:71 Type:c0 EDir:70 ED1:03 ED2:ff ED3:ff";
372	2011-01-08 11:41:56	KVM Session sensor - Session Pending	Server 2		Info	IPMI	Sensor: KVM Session sensor - Session Pending.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Pending	2040	System	Array ( [snsrnum] => 71 [number] => 2 [generator] => 32 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:3200 Num:71 Type:c0 EDir:70 ED1:00 ED2:ff ED3:ff";
373	2011-01-08 11:41:57	KVM Session sensor - Invalid session ticket	Server 2		Info	IPMI	Sensor: KVM Session sensor - Invalid session ticket.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Invalid session ticket	2046	System	Array ( [snsrnum] => 71 [number] => 2 [generator] => 32 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 06 )	s:68:"Raw IPMI (hex): Gen:3200 Num:71 Type:c0 EDir:70 ED1:06 ED2:ff ED3:ff";
374	2011-01-08 12:04:53	OS Graceful shutdown.	Server 3		Info	IPMI	Server 3 has been shutdown and powered off by the operating system.	Shutdown command was initiated through the server Operating System.	No action is necessary.	OS Graceful shutdown.	2150	System	Array ( [snsrnum] => 0 [number] => 3 [generator] => 34 [snsrName] => OS Stop/Shutdown )	s:68:"Raw IPMI (hex): Gen:3400 Num:00 Type:20 EDir:6f ED1:03 ED2:ff ED3:ff";
377	2011-01-08 12:04:57	Server Power Off	Server 3		Info	IPMI	Sensor: Power Unit Status - Server 3 power unit is off.	Server Sensor: Power Unit Status; This is due to one of the following: 1) pushing the power button on the server front panel; 2) Power Off Action from the Graphical User Interface; 3) ACPI Power Down request from the host operating system; 4) Power loss.	No action is required	Server Power Off	2010	System	Array ( [snsrnum] => 1 [number] => 3 [generator] => 34 [snsrName] => Power Unit Status [assert] => Asserted [verb] => is [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:3400 Num:01 Type:09 EDir:6f ED1:00 ED2:ff ED3:ff";
378	2011-01-08 12:58:54	KVM Session sensor - Session Ended Normally	Server 3		Info	IPMI	Sensor: KVM Session sensor - Session Ended Normally.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Ended Normally	2042	System	Array ( [snsrnum] => 71 [number] => 3 [generator] => 34 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 02 )	s:68:"Raw IPMI (hex): Gen:3400 Num:71 Type:c0 EDir:70 ED1:02 ED2:ff ED3:ff";
379	2011-01-08 13:00:27	Action 'Power On' on 'Server 3' by user 'admin'	Server 3		Info	Application	Action 'Power On' on 'Server 3' by user 'admin', with output of: 'Server 3 is now powered on.'. Warning: 'None.'			Action 'Power On' on 'Server 3' by user 'admin'	503	admin	Array ( [label] => Power On [component] => Server 3 [return] => Server 3 is now powered on. [userWarning] => None. [AliasName] => Server 3 )
380	2011-01-08 13:00:28	Server Power Up	Server 3		Info	IPMI	Sensor: Power Unit Status - Server 3 power unit is on.	Server Sensor: Power Unit Status; This is due to one of the following: 1) pushing the power button on the server front panel; 2) Power On Action from the Graphical User Interface; 3) ACPI Event (wakeup on lan, etc).	No action is required	Server Power Up	2011	System	Array ( [snsrnum] => 1 [number] => 3 [generator] => 34 [snsrName] => Power Unit Status [assert] => Deasserted [verb] => was [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:3400 Num:01 Type:09 EDir:ef ED1:00 ED2:ff ED3:ff";
381	2011-01-08 13:00:47	KVM Session sensor - Session Pending	Server 3		Info	IPMI	Sensor: KVM Session sensor - Session Pending.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Pending	2040	System	Array ( [snsrnum] => 71 [number] => 3 [generator] => 34 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:3400 Num:71 Type:c0 EDir:70 ED1:00 ED2:ff ED3:ff";
382	2011-01-08 13:00:48	KVM Session sensor - Session Established	Server 3		Info	IPMI	Sensor: KVM Session sensor - Session Established.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Established	2041	System	Array ( [snsrnum] => 71 [number] => 3 [generator] => 34 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 01 )	s:68:"Raw IPMI (hex): Gen:3400 Num:71 Type:c0 EDir:70 ED1:01 ED2:ff ED3:ff";
391	2011-01-08 13:02:25	Action 'Reset' on 'Server 3' by user 'admin'	Server 3		Info	Application	Action 'Reset' on 'Server 3' by user 'admin', with output of: 'Reset requested for Server 3.'. Warning: 'None.'			Action 'Reset' on 'Server 3' by user 'admin'	503	admin	Array ( [label] => Reset [component] => Server 3 [return] => Reset requested for Server 3. [userWarning] => None. [AliasName] => Server 3 )
402	2011-01-08 14:31:39	OS Booted from HDD device	Server 3		Info	IPMI	The server has booted an OS from a HDD device	Server 3 has booted an OS	No action is required	OS Booted from HDD device	2140	System	Array ( [snsrnum] => 0 [number] => 3 [generator] => 34 [P1] => HDD [snsrName] => OS Boot )	s:68:"Raw IPMI (hex): Gen:3400 Num:00 Type:1f EDir:6f ED1:01 ED2:ff ED3:ff";
403	2011-01-08 14:36:39	KVM Session sensor - Session Pending	Server 1		Info	IPMI	Sensor: KVM Session sensor - Session Pending.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Pending	2040	System	Array ( [snsrnum] => 71 [number] => 1 [generator] => 30 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:3000 Num:71 Type:c0 EDir:70 ED1:00 ED2:ff ED3:ff";
404	2011-01-08 14:36:40	KVM Session sensor - Session Established	Server 1		Info	IPMI	Sensor: KVM Session sensor - Session Established.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Established	2041	System	Array ( [snsrnum] => 71 [number] => 1 [generator] => 30 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 01 )	s:68:"Raw IPMI (hex): Gen:3000 Num:71 Type:c0 EDir:70 ED1:01 ED2:ff ED3:ff";
405	2011-01-08 14:37:06	KVM Session sensor - Session Pending	Server 2		Info	IPMI	Sensor: KVM Session sensor - Session Pending.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Pending	2040	System	Array ( [snsrnum] => 71 [number] => 2 [generator] => 32 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:3200 Num:71 Type:c0 EDir:70 ED1:00 ED2:ff ED3:ff";
406	2011-01-08 14:37:07	KVM Session sensor - Session Established	Server 2		Info	IPMI	Sensor: KVM Session sensor - Session Established.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Established	2041	System	Array ( [snsrnum] => 71 [number] => 2 [generator] => 32 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 01 )	s:68:"Raw IPMI (hex): Gen:3200 Num:71 Type:c0 EDir:70 ED1:01 ED2:ff ED3:ff";
407	2011-01-08 15:32:20	OS Graceful shutdown.	Server 3		Info	IPMI	Server 3 has been shutdown and powered off by the operating system.	Shutdown command was initiated through the server Operating System.	No action is necessary.	OS Graceful shutdown.	2150	System	Array ( [snsrnum] => 0 [number] => 3 [generator] => 34 [snsrName] => OS Stop/Shutdown )	s:68:"Raw IPMI (hex): Gen:3400 Num:00 Type:20 EDir:6f ED1:03 ED2:ff ED3:ff";
408	2011-01-08 15:32:24	Server Power Off	Server 3		Info	IPMI	Sensor: Power Unit Status - Server 3 power unit is off.	Server Sensor: Power Unit Status; This is due to one of the following: 1) pushing the power button on the server front panel; 2) Power Off Action from the Graphical User Interface; 3) ACPI Power Down request from the host operating system; 4) Power loss.	No action is required	Server Power Off	2010	System	Array ( [snsrnum] => 1 [number] => 3 [generator] => 34 [snsrName] => Power Unit Status [assert] => Asserted [verb] => is [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:3400 Num:01 Type:09 EDir:6f ED1:00 ED2:ff ED3:ff";
411	2011-01-08 15:34:11	KVM Session sensor - Session Ended Normally	Server 3		Info	IPMI	Sensor: KVM Session sensor - Session Ended Normally.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Ended Normally	2042	System	Array ( [snsrnum] => 71 [number] => 3 [generator] => 34 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 02 )	s:68:"Raw IPMI (hex): Gen:3400 Num:71 Type:c0 EDir:70 ED1:02 ED2:ff ED3:ff";
412	2011-01-08 15:34:44	Server Power Up	Server 3		Info	IPMI	Sensor: Power Unit Status - Server 3 power unit is on.	Server Sensor: Power Unit Status; This is due to one of the following: 1) pushing the power button on the server front panel; 2) Power On Action from the Graphical User Interface; 3) ACPI Event (wakeup on lan, etc).	No action is required	Server Power Up	2011	System	Array ( [snsrnum] => 1 [number] => 3 [generator] => 34 [snsrName] => Power Unit Status [assert] => Deasserted [verb] => was [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:3400 Num:01 Type:09 EDir:ef ED1:00 ED2:ff ED3:ff";
413	2011-01-08 15:34:45	Action 'Power On' on 'Server 3' by user 'admin'	Server 3		Info	Application	Action 'Power On' on 'Server 3' by user 'admin', with output of: 'Server 3 is now powered on.'. Warning: 'None.'			Action 'Power On' on 'Server 3' by user 'admin'	503	admin	Array ( [label] => Power On [component] => Server 3 [return] => Server 3 is now powered on. [userWarning] => None. [AliasName] => Server 3 )
414	2011-01-08 15:35:42	KVM Session sensor - Session Pending	Server 3		Info	IPMI	Sensor: KVM Session sensor - Session Pending.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Pending	2040	System	Array ( [snsrnum] => 71 [number] => 3 [generator] => 34 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:3400 Num:71 Type:c0 EDir:70 ED1:00 ED2:ff ED3:ff";
415	2011-01-08 15:35:43	KVM Session sensor - Session Established	Server 3		Info	IPMI	Sensor: KVM Session sensor - Session Established.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Established	2041	System	Array ( [snsrnum] => 71 [number] => 3 [generator] => 34 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 01 )	s:68:"Raw IPMI (hex): Gen:3400 Num:71 Type:c0 EDir:70 ED1:01 ED2:ff ED3:ff";
424	2011-01-08 15:38:12	OS Booted from HDD device	Server 3		Info	IPMI	The server has booted an OS from a HDD device	Server 3 has booted an OS	No action is required	OS Booted from HDD device	2140	System	Array ( [snsrnum] => 0 [number] => 3 [generator] => 34 [P1] => HDD [snsrName] => OS Boot )	s:68:"Raw IPMI (hex): Gen:3400 Num:00 Type:1f EDir:6f ED1:01 ED2:ff ED3:ff";
435	2011-01-08 16:01:41	OS Booted from HDD device	Server 3		Info	IPMI	The server has booted an OS from a HDD device	Server 3 has booted an OS	No action is required	OS Booted from HDD device	2140	System	Array ( [snsrnum] => 0 [number] => 3 [generator] => 34 [P1] => HDD [snsrName] => OS Boot )	s:68:"Raw IPMI (hex): Gen:3400 Num:00 Type:1f EDir:6f ED1:01 ED2:ff ED3:ff";
436	2011-01-08 16:06:23	OS Graceful shutdown.	Server 3		Info	IPMI	Server 3 has been shutdown and powered off by the operating system.	Shutdown command was initiated through the server Operating System.	No action is necessary.	OS Graceful shutdown.	2150	System	Array ( [snsrnum] => 0 [number] => 3 [generator] => 34 [snsrName] => OS Stop/Shutdown )	s:68:"Raw IPMI (hex): Gen:3400 Num:00 Type:20 EDir:6f ED1:03 ED2:ff ED3:ff";
447	2011-01-08 16:08:41	OS Booted from HDD device	Server 3		Info	IPMI	The server has booted an OS from a HDD device	Server 3 has booted an OS	No action is required	OS Booted from HDD device	2140	System	Array ( [snsrnum] => 0 [number] => 3 [generator] => 34 [P1] => HDD [snsrName] => OS Boot )	s:68:"Raw IPMI (hex): Gen:3400 Num:00 Type:1f EDir:6f ED1:01 ED2:ff ED3:ff";
448	2011-01-08 16:38:31	KVM Session sensor - Session Ended Normally	Server 1		Info	IPMI	Sensor: KVM Session sensor - Session Ended Normally.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Ended Normally	2042	System	Array ( [snsrnum] => 71 [number] => 1 [generator] => 30 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 02 )	s:68:"Raw IPMI (hex): Gen:3000 Num:71 Type:c0 EDir:70 ED1:02 ED2:ff ED3:ff";
449	2011-01-08 16:38:34	KVM Session sensor - Session Ended Normally	Server 2		Info	IPMI	Sensor: KVM Session sensor - Session Ended Normally.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Ended Normally	2042	System	Array ( [snsrnum] => 71 [number] => 2 [generator] => 32 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 02 )	s:68:"Raw IPMI (hex): Gen:3200 Num:71 Type:c0 EDir:70 ED1:02 ED2:ff ED3:ff";
450	2011-01-08 16:51:11	KVM Session sensor - Session Ended Normally	Server 3		Info	IPMI	Sensor: KVM Session sensor - Session Ended Normally.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Ended Normally	2042	System	Array ( [snsrnum] => 71 [number] => 3 [generator] => 34 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 02 )	s:68:"Raw IPMI (hex): Gen:3400 Num:71 Type:c0 EDir:70 ED1:02 ED2:ff ED3:ff";
453	2011-01-10 08:32:08	KVM Session sensor - Session Pending	Server 3		Info	IPMI	Sensor: KVM Session sensor - Session Pending.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Pending	2040	System	Array ( [snsrnum] => 71 [number] => 3 [generator] => 34 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:3400 Num:71 Type:c0 EDir:70 ED1:00 ED2:ff ED3:ff";
454	2011-01-10 08:32:09	KVM Session sensor - Session Established	Server 3		Info	IPMI	Sensor: KVM Session sensor - Session Established.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Established	2041	System	Array ( [snsrnum] => 71 [number] => 3 [generator] => 34 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 01 )	s:68:"Raw IPMI (hex): Gen:3400 Num:71 Type:c0 EDir:70 ED1:01 ED2:ff ED3:ff";
455	2011-01-10 08:37:56	OS Graceful shutdown.	Server 3		Info	IPMI	Server 3 has been shutdown and powered off by the operating system.	Shutdown command was initiated through the server Operating System.	No action is necessary.	OS Graceful shutdown.	2150	System	Array ( [snsrnum] => 0 [number] => 3 [generator] => 34 [snsrName] => OS Stop/Shutdown )	s:68:"Raw IPMI (hex): Gen:3400 Num:00 Type:20 EDir:6f ED1:03 ED2:ff ED3:ff";
466	2011-01-10 08:40:07	OS Booted from HDD device	Server 3		Info	IPMI	The server has booted an OS from a HDD device	Server 3 has booted an OS	No action is required	OS Booted from HDD device	2140	System	Array ( [snsrnum] => 0 [number] => 3 [generator] => 34 [P1] => HDD [snsrName] => OS Boot )	s:68:"Raw IPMI (hex): Gen:3400 Num:00 Type:1f EDir:6f ED1:01 ED2:ff ED3:ff";
467	2011-01-10 14:28:47	KVM Session sensor - Session Ended Normally	Server 3		Info	IPMI	Sensor: KVM Session sensor - Session Ended Normally.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Ended Normally	2042	System	Array ( [snsrnum] => 71 [number] => 3 [generator] => 34 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 02 )	s:68:"Raw IPMI (hex): Gen:3400 Num:71 Type:c0 EDir:70 ED1:02 ED2:ff ED3:ff";
468	2011-01-11 03:00:40	Spare check started.	Storage Subsystem		Info	Storage	Spare check started.	Spare check started either manually by the user or started by SW scheduler	No action required	Spare check started.	269	System	Array ( [ControllerId] => 0 )	s:143:"00000000D851943F130000600000000000000000000000001300006000000000\|PSev:2\|Time:20110111030038.000000+000\|SysName:2000001517AAAE54\|Seq:461\|Ctrlr:0";
469	2011-01-11 03:00:40	Spare check completed successfully.	Storage Subsystem		Info	Storage	Spare check completed successfully.		No action required	Spare check completed successfully.	270	System	Array ( [ControllerId] => 0 )	s:143:"000000000000000000000000130000600000000000000000B4DFBA4A84DFBA4A\|PSev:2\|Time:20110111030038.000000+000\|SysName:2000001517AAAE54\|Seq:462\|Ctrlr:0";
470	2011-01-13 15:35:03	KVM Session sensor - Session Pending	Server 1		Info	IPMI	Sensor: KVM Session sensor - Session Pending.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Pending	2040	System	Array ( [snsrnum] => 71 [number] => 1 [generator] => 30 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:3000 Num:71 Type:c0 EDir:70 ED1:00 ED2:ff ED3:ff";
471	2011-01-13 15:35:03	Action 'Reset' on 'Server 1' by user 'admin'	Server 1		Info	Application	Action 'Reset' on 'Server 1' by user 'admin', with output of: 'Reset requested for Server 1.'. Warning: 'None.'			Action 'Reset' on 'Server 1' by user 'admin'	503	admin	Array ( [label] => Reset [component] => Server 1 [return] => Reset requested for Server 1. [userWarning] => None. [AliasName] => Server 1 )
473	2011-01-13 15:35:08	KVM Session sensor - Session Established	Server 1		Info	IPMI	Sensor: KVM Session sensor - Session Established.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Established	2041	System	Array ( [snsrnum] => 71 [number] => 1 [generator] => 30 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 01 )	s:68:"Raw IPMI (hex): Gen:3000 Num:71 Type:c0 EDir:70 ED1:01 ED2:ff ED3:ff";
477	2011-01-13 15:46:37	KVM Session sensor - Session Ended Normally	Server 1		Info	IPMI	Sensor: KVM Session sensor - Session Ended Normally.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Ended Normally	2042	System	Array ( [snsrnum] => 71 [number] => 1 [generator] => 30 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 02 )	s:68:"Raw IPMI (hex): Gen:3000 Num:71 Type:c0 EDir:70 ED1:02 ED2:ff ED3:ff";
478	2011-01-14 17:18:43	KVM Session sensor - Session Pending	Server 1		Info	IPMI	Sensor: KVM Session sensor - Session Pending.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Pending	2040	System	Array ( [snsrnum] => 71 [number] => 1 [generator] => 30 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:3000 Num:71 Type:c0 EDir:70 ED1:00 ED2:ff ED3:ff";
479	2011-01-14 17:18:44	KVM Session sensor - Session Established	Server 1		Info	IPMI	Sensor: KVM Session sensor - Session Established.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Established	2041	System	Array ( [snsrnum] => 71 [number] => 1 [generator] => 30 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 01 )	s:68:"Raw IPMI (hex): Gen:3000 Num:71 Type:c0 EDir:70 ED1:01 ED2:ff ED3:ff";
490	2011-01-14 17:24:47	Server Power Off	Server 1		Info	IPMI	Sensor: Power Unit Status - Server 1 power unit is off.	Server Sensor: Power Unit Status; This is due to one of the following: 1) pushing the power button on the server front panel; 2) Power Off Action from the Graphical User Interface; 3) ACPI Power Down request from the host operating system; 4) Power loss.	No action is required	Server Power Off	2010	System	Array ( [snsrnum] => 1 [number] => 1 [generator] => 30 [snsrName] => Power Unit Status [assert] => Asserted [verb] => is [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:3000 Num:01 Type:09 EDir:6f ED1:00 ED2:ff ED3:ff";
491	2011-01-14 17:24:48	Action 'Power Off' on 'Server 1' by user 'admin'	Server 1		Info	Application	Action 'Power Off' on 'Server 1' by user 'admin', with output of: 'Server 1 is now powered off.'. Warning: 'None.'			Action 'Power Off' on 'Server 1' by user 'admin'	503	admin	Array ( [label] => Power Off [component] => Server 1 [return] => Server 1 is now powered off. [userWarning] => None. [AliasName] => Server 1 )
494	2011-01-14 17:25:01	Server 1 removed	Server 1		Info	IPMI	A server was removed from server slot 1.	Server removed	Replace the Server	Server 1 removed	1000	System	Array ( [number] => 1 )	s:68:"Raw IPMI (hex): Gen:2000 Num:60 Type:c0 EDir:ef ED1:05 ED2:ff ED3:ff";
495	2011-01-14 17:25:03	Link Down: Server 1: Port 1	Switch 1		Info	SNMP	Link Down: Server 1: Port 1<br> Array ( [ifIndex.13] => 13 [ifAdminStatus.13] => up [ifOperStatus.13] => down )			Link Down: Server 1: Port 1	3204	System	Array ( [port] => Server 1: Port 1 [portIndex] => 13 [varbinds] => Array ( [ifIndex.13] => 13 [ifAdminStatus.13] => up [ifOperStatus.13] => down ) )
496	2011-01-14 17:25:06	Link Down: Server 1: Port 2	Switch 1		Info	SNMP	Link Down: Server 1: Port 2<br> Array ( [ifIndex.14] => 14 [ifAdminStatus.14] => up [ifOperStatus.14] => down )			Link Down: Server 1: Port 2	3204	System	Array ( [port] => Server 1: Port 2 [portIndex] => 14 [varbinds] => Array ( [ifIndex.14] => 14 [ifAdminStatus.14] => up [ifOperStatus.14] => down ) )
497	2011-01-14 17:25:36	Server 1 detected	Server 1		Info	IPMI	A server was detected in server slot 1.		No action is required	Server 1 detected	1001	System	Array ( [number] => 1 )	s:68:"Raw IPMI (hex): Gen:2000 Num:60 Type:c0 EDir:6f ED1:05 ED2:ff ED3:ff";
498	2011-01-14 17:25:39	Link Up: Server 1: Port 1 has link and should now be active	Switch 1		Info	SNMP	Link Up: Server 1: Port 1 has link and should now be active <br /> Array ( [ifIndex.13] => 13 [ifAdminStatus.13] => up [ifOperStatus.13] => up )			Link Up: Server 1: Port 1 has link and should now be active	3205	System	Array ( [port] => Server 1: Port 1 [portIndex] => 13 [varbinds] => Array ( [ifIndex.13] => 13 [ifAdminStatus.13] => up [ifOperStatus.13] => up ) )
500	2011-01-14 17:25:43	Link Up: Server 1: Port 2 has link and should now be active	Switch 1		Info	SNMP	Link Up: Server 1: Port 2 has link and should now be active <br /> Array ( [ifIndex.14] => 14 [ifAdminStatus.14] => up [ifOperStatus.14] => up )			Link Up: Server 1: Port 2 has link and should now be active	3205	System	Array ( [port] => Server 1: Port 2 [portIndex] => 14 [varbinds] => Array ( [ifIndex.14] => 14 [ifAdminStatus.14] => up [ifOperStatus.14] => up ) )
501	2011-01-14 17:25:45	Spanning Tree Port State Forwarding: {port}	Switch 1		Info	SNMP	Spanning Tree Port State Forwarding: {port}<br> Array ( [rndErrorDesc.0] => %STP-W-PORTSTATUS: Server.1.2: STP status Forwarding [rndErrorSeverity.0] => warning [rnd.57.2.8.1.0] => 14 [rnd.57.2.8.2.0] => 0 )			Spanning Tree Port State Forwarding: {port}	3561	System	Array ( [port] => [portIndex] => [varbinds] => Array ( [rndErrorDesc.0] => %STP-W-PORTSTATUS: Server.1.2: STP status Forwarding [rndErrorSeverity.0] => warning [rnd.57.2.8.1.0] => 14 [rnd.57.2.8.2.0] => 0 ) )
502	2011-01-14 17:25:47	Spanning Tree Port State Forwarding: {port}	Switch 1		Info	SNMP	Spanning Tree Port State Forwarding: {port}<br> Array ( [rndErrorDesc.0] => %STP-W-PORTSTATUS: Server.1.1: STP status Forwarding [rndErrorSeverity.0] => warning [rnd.57.2.8.1.0] => 13 [rnd.57.2.8.2.0] => 0 )			Spanning Tree Port State Forwarding: {port}	3561	System	Array ( [port] => [portIndex] => [varbinds] => Array ( [rndErrorDesc.0] => %STP-W-PORTSTATUS: Server.1.1: STP status Forwarding [rndErrorSeverity.0] => warning [rnd.57.2.8.1.0] => 13 [rnd.57.2.8.2.0] => 0 ) )
504	2011-01-14 17:31:26	Server Power Up	Server 1		Info	IPMI	Sensor: Power Unit Status - Server 1 power unit is on.	Server Sensor: Power Unit Status; This is due to one of the following: 1) pushing the power button on the server front panel; 2) Power On Action from the Graphical User Interface; 3) ACPI Event (wakeup on lan, etc).	No action is required	Server Power Up	2011	System	Array ( [snsrnum] => 1 [number] => 1 [generator] => 30 [snsrName] => Power Unit Status [assert] => Deasserted [verb] => was [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:3000 Num:01 Type:09 EDir:ef ED1:00 ED2:ff ED3:ff";
505	2011-01-14 17:31:27	Action 'Power On' on 'Server 1' by user 'admin'	Server 1		Info	Application	Action 'Power On' on 'Server 1' by user 'admin', with output of: 'Server 1 is now powered on.'. Warning: 'None.'			Action 'Power On' on 'Server 1' by user 'admin'	503	admin	Array ( [label] => Power On [component] => Server 1 [return] => Server 1 is now powered on. [userWarning] => None. [AliasName] => Server 1 )
506	2011-01-14 17:32:03	KVM Session sensor - Session Pending	Server 1		Info	IPMI	Sensor: KVM Session sensor - Session Pending.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Pending	2040	System	Array ( [snsrnum] => 71 [number] => 1 [generator] => 30 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:3000 Num:71 Type:c0 EDir:70 ED1:00 ED2:ff ED3:ff";
507	2011-01-14 17:32:04	KVM Session sensor - Session Established	Server 1		Info	IPMI	Sensor: KVM Session sensor - Session Established.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Established	2041	System	Array ( [snsrnum] => 71 [number] => 1 [generator] => 30 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 01 )	s:68:"Raw IPMI (hex): Gen:3000 Num:71 Type:c0 EDir:70 ED1:01 ED2:ff ED3:ff";
512	2011-01-14 17:39:41	KVM Session sensor - Session Ended Normally	Server 1		Info	IPMI	Sensor: KVM Session sensor - Session Ended Normally.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Ended Normally	2042	System	Array ( [snsrnum] => 71 [number] => 1 [generator] => 30 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 02 )	s:68:"Raw IPMI (hex): Gen:3000 Num:71 Type:c0 EDir:70 ED1:02 ED2:ff ED3:ff";
513	2011-01-15 09:41:36	KVM Session sensor - Session Pending	Server 1		Info	IPMI	Sensor: KVM Session sensor - Session Pending.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Pending	2040	System	Array ( [snsrnum] => 71 [number] => 1 [generator] => 30 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:3000 Num:71 Type:c0 EDir:70 ED1:00 ED2:ff ED3:ff";
514	2011-01-15 09:41:37	KVM Session sensor - Session Established	Server 1		Info	IPMI	Sensor: KVM Session sensor - Session Established.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Established	2041	System	Array ( [snsrnum] => 71 [number] => 1 [generator] => 30 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 01 )	s:68:"Raw IPMI (hex): Gen:3000 Num:71 Type:c0 EDir:70 ED1:01 ED2:ff ED3:ff";
515	2011-01-15 09:41:42	Action 'Reset' on 'Server 1' by user 'admin'	Server 1		Info	Application	Action 'Reset' on 'Server 1' by user 'admin', with output of: 'Reset requested for Server 1.'. Warning: 'None.'			Action 'Reset' on 'Server 1' by user 'admin'	503	admin	Array ( [label] => Reset [component] => Server 1 [return] => Reset requested for Server 1. [userWarning] => None. [AliasName] => Server 1 )
522	2011-01-15 09:45:42	KVM Session sensor - Session Ended Normally	Server 1		Info	IPMI	Sensor: KVM Session sensor - Session Ended Normally.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Ended Normally	2042	System	Array ( [snsrnum] => 71 [number] => 1 [generator] => 30 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 02 )	s:68:"Raw IPMI (hex): Gen:3000 Num:71 Type:c0 EDir:70 ED1:02 ED2:ff ED3:ff";
523	2011-01-15 11:18:07	KVM Session sensor - Session Pending	Server 1		Info	IPMI	Sensor: KVM Session sensor - Session Pending.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Pending	2040	System	Array ( [snsrnum] => 71 [number] => 1 [generator] => 30 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:3000 Num:71 Type:c0 EDir:70 ED1:00 ED2:ff ED3:ff";
524	2011-01-15 11:18:08	KVM Session sensor - Session Established	Server 1		Info	IPMI	Sensor: KVM Session sensor - Session Established.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Established	2041	System	Array ( [snsrnum] => 71 [number] => 1 [generator] => 30 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 01 )	s:68:"Raw IPMI (hex): Gen:3000 Num:71 Type:c0 EDir:70 ED1:01 ED2:ff ED3:ff";
525	2011-01-15 11:18:17	Action 'Reset' on 'Server 1' by user 'admin'	Server 1		Info	Application	Action 'Reset' on 'Server 1' by user 'admin', with output of: 'Reset requested for Server 1.'. Warning: 'None.'			Action 'Reset' on 'Server 1' by user 'admin'	503	admin	Array ( [label] => Reset [component] => Server 1 [return] => Reset requested for Server 1. [userWarning] => None. [AliasName] => Server 1 )
536	2011-01-15 11:21:43	Action 'Reset' on 'Server 1' by user 'admin'	Server 1		Info	Application	Action 'Reset' on 'Server 1' by user 'admin', with output of: 'Reset requested for Server 1.'. Warning: 'None.'			Action 'Reset' on 'Server 1' by user 'admin'	503	admin	Array ( [label] => Reset [component] => Server 1 [return] => Reset requested for Server 1. [userWarning] => None. [AliasName] => Server 1 )
547	2011-01-15 12:27:54	KVM Session sensor - Session Ended Normally	Server 1		Info	IPMI	Sensor: KVM Session sensor - Session Ended Normally.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Ended Normally	2042	System	Array ( [snsrnum] => 71 [number] => 1 [generator] => 30 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 02 )	s:68:"Raw IPMI (hex): Gen:3000 Num:71 Type:c0 EDir:70 ED1:02 ED2:ff ED3:ff";
548	2011-01-16 13:05:16	User 'ADMIN' authentication failure from host '192.168.21.24'	Management Module		Info	System	User 'ADMIN' authentication failure from host '192.168.21.24'			User 'ADMIN' authentication failure from host '192.168.21.24'	501	ADMIN	Array ( [user] => ADMIN [host] => 192.168.21.24 )
549	2011-01-16 16:27:13	KVM Session sensor - Session Pending	Server 3		Info	IPMI	Sensor: KVM Session sensor - Session Pending.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Pending	2040	System	Array ( [snsrnum] => 71 [number] => 3 [generator] => 34 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:3400 Num:71 Type:c0 EDir:70 ED1:00 ED2:ff ED3:ff";
550	2011-01-16 16:27:14	KVM Session sensor - Session Established	Server 3		Info	IPMI	Sensor: KVM Session sensor - Session Established.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Established	2041	System	Array ( [snsrnum] => 71 [number] => 3 [generator] => 34 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 01 )	s:68:"Raw IPMI (hex): Gen:3400 Num:71 Type:c0 EDir:70 ED1:01 ED2:ff ED3:ff";
551	2011-01-16 16:44:51	KVM Session sensor - Session Ended Normally	Server 3		Info	IPMI	Sensor: KVM Session sensor - Session Ended Normally.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Ended Normally	2042	System	Array ( [snsrnum] => 71 [number] => 3 [generator] => 34 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 02 )	s:68:"Raw IPMI (hex): Gen:3400 Num:71 Type:c0 EDir:70 ED1:02 ED2:ff ED3:ff";
552	2011-01-17 16:37:30	KVM Session sensor - Session Pending	Server 2		Info	IPMI	Sensor: KVM Session sensor - Session Pending.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Pending	2040	System	Array ( [snsrnum] => 71 [number] => 2 [generator] => 32 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:3200 Num:71 Type:c0 EDir:70 ED1:00 ED2:ff ED3:ff";
553	2011-01-17 16:37:31	KVM Session sensor - Session Established	Server 2		Info	IPMI	Sensor: KVM Session sensor - Session Established.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Established	2041	System	Array ( [snsrnum] => 71 [number] => 2 [generator] => 32 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 01 )	s:68:"Raw IPMI (hex): Gen:3200 Num:71 Type:c0 EDir:70 ED1:01 ED2:ff ED3:ff";
556	2011-01-17 16:40:43	KVM Session sensor - Session Ended Normally	Server 2		Info	IPMI	Sensor: KVM Session sensor - Session Ended Normally.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Ended Normally	2042	System	Array ( [snsrnum] => 71 [number] => 2 [generator] => 32 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 02 )	s:68:"Raw IPMI (hex): Gen:3200 Num:71 Type:c0 EDir:70 ED1:02 ED2:ff ED3:ff";
557	2011-01-17 16:40:48	Action 'Terminate KVM Session' on 'Server 2' by user 'admin'	Server 2		Info	Application	Action 'Terminate KVM Session' on 'Server 2' by user 'admin', with output of: 'KVM Session Shutdown Complete.'. Warning: 'None.'			Action 'Terminate KVM Session' on 'Server 2' by user 'admin'	503	admin	Array ( [label] => Terminate KVM Session [component] => Server 2 [return] => KVM Session Shutdown Complete. [userWarning] => None. [AliasName] => Server 2 )
560	2011-01-17 16:41:12	KVM Session sensor - Session Pending	Server 2		Info	IPMI	Sensor: KVM Session sensor - Session Pending.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Pending	2040	System	Array ( [snsrnum] => 71 [number] => 2 [generator] => 32 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:3200 Num:71 Type:c0 EDir:70 ED1:00 ED2:ff ED3:ff";
561	2011-01-17 16:41:13	KVM Session sensor - Session Established	Server 2		Info	IPMI	Sensor: KVM Session sensor - Session Established.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Established	2041	System	Array ( [snsrnum] => 71 [number] => 2 [generator] => 32 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 01 )	s:68:"Raw IPMI (hex): Gen:3200 Num:71 Type:c0 EDir:70 ED1:01 ED2:ff ED3:ff";
570	2011-01-17 16:57:52	KVM Session sensor - Session Ended Normally	Server 2		Info	IPMI	Sensor: KVM Session sensor - Session Ended Normally.	Server Sensor: KVM Session sensor	No action is required	KVM Session sensor - Session Ended Normally	2042	System	Array ( [snsrnum] => 71 [number] => 2 [generator] => 32 [snsrName] => KVM Session sensor [assert] => Asserted [verb] => is [offset] => 02 )	s:68:"Raw IPMI (hex): Gen:3200 Num:71 Type:c0 EDir:70 ED1:02 ED2:ff ED3:ff";
575	2011-01-18 03:00:40	Spare check started.	Storage Subsystem		Info	Storage	Spare check started.	Spare check started either manually by the user or started by SW scheduler	No action required	Spare check started.	269	System	Array ( [ControllerId] => 0 )	s:143:"00000000D851943F130000600000000000000000000000001300006000000000\|PSev:2\|Time:20110118030038.000000+000\|SysName:2000001517AAAE54\|Seq:511\|Ctrlr:0";
576	2011-01-18 03:00:40	Spare check completed successfully.	Storage Subsystem		Info	Storage	Spare check completed successfully.		No action required	Spare check completed successfully.	270	System	Array ( [ControllerId] => 0 )	s:143:"000000000000000000000000130000600000000000000000B4DFBA4A84DFBA4A\|PSev:2\|Time:20110118030038.000000+000\|SysName:2000001517AAAE54\|Seq:512\|Ctrlr:0";
577	2011-01-18 17:11:03	OS Graceful shutdown.	Server 3		Info	IPMI	Server 3 has been shutdown and powered off by the operating system.	Shutdown command was initiated through the server Operating System.	No action is necessary.	OS Graceful shutdown.	2150	System	Array ( [snsrnum] => 0 [number] => 3 [generator] => 34 [snsrName] => OS Stop/Shutdown )	s:68:"Raw IPMI (hex): Gen:3400 Num:00 Type:20 EDir:6f ED1:03 ED2:ff ED3:ff";
580	2011-01-18 17:11:13	Server Power Off	Server 3		Info	IPMI	Sensor: Power Unit Status - Server 3 power unit is off.	Server Sensor: Power Unit Status; This is due to one of the following: 1) pushing the power button on the server front panel; 2) Power Off Action from the Graphical User Interface; 3) ACPI Power Down request from the host operating system; 4) Power loss.	No action is required	Server Power Off	2010	System	Array ( [snsrnum] => 1 [number] => 3 [generator] => 34 [snsrName] => Power Unit Status [assert] => Asserted [verb] => is [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:3400 Num:01 Type:09 EDir:6f ED1:00 ED2:ff ED3:ff";
581	2011-01-20 16:00:21	Server Power Up	Server 3		Info	IPMI	Sensor: Power Unit Status - Server 3 power unit is on.	Server Sensor: Power Unit Status; This is due to one of the following: 1) pushing the power button on the server front panel; 2) Power On Action from the Graphical User Interface; 3) ACPI Event (wakeup on lan, etc).	No action is required	Server Power Up	2011	System	Array ( [snsrnum] => 1 [number] => 3 [generator] => 34 [snsrName] => Power Unit Status [assert] => Deasserted [verb] => was [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:3400 Num:01 Type:09 EDir:ef ED1:00 ED2:ff ED3:ff";
582	2011-01-20 16:00:22	Action 'Power On' on 'Server 3' by user 'admin'	Server 3		Info	Application	Action 'Power On' on 'Server 3' by user 'admin', with output of: 'Server 3 is now powered on.'. Warning: 'None.'			Action 'Power On' on 'Server 3' by user 'admin'	503	admin	Array ( [label] => Power On [component] => Server 3 [return] => Server 3 is now powered on. [userWarning] => None. [AliasName] => Server 3 )
591	2011-01-20 16:02:14	OS Booted from HDD device	Server 3		Info	IPMI	The server has booted an OS from a HDD device	Server 3 has booted an OS	No action is required	OS Booted from HDD device	2140	System	Array ( [snsrnum] => 0 [number] => 3 [generator] => 34 [P1] => HDD [snsrName] => OS Boot )	s:68:"Raw IPMI (hex): Gen:3400 Num:00 Type:1f EDir:6f ED1:01 ED2:ff ED3:ff";
592	2011-01-20 17:02:44	OS Graceful shutdown.	Server 3		Info	IPMI	Server 3 has been shutdown and powered off by the operating system.	Shutdown command was initiated through the server Operating System.	No action is necessary.	OS Graceful shutdown.	2150	System	Array ( [snsrnum] => 0 [number] => 3 [generator] => 34 [snsrName] => OS Stop/Shutdown )	s:68:"Raw IPMI (hex): Gen:3400 Num:00 Type:20 EDir:6f ED1:03 ED2:ff ED3:ff";
595	2011-01-20 17:02:48	Server Power Off	Server 3		Info	IPMI	Sensor: Power Unit Status - Server 3 power unit is off.	Server Sensor: Power Unit Status; This is due to one of the following: 1) pushing the power button on the server front panel; 2) Power Off Action from the Graphical User Interface; 3) ACPI Power Down request from the host operating system; 4) Power loss.	No action is required	Server Power Off	2010	System	Array ( [snsrnum] => 1 [number] => 3 [generator] => 34 [snsrName] => Power Unit Status [assert] => Asserted [verb] => is [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:3400 Num:01 Type:09 EDir:6f ED1:00 ED2:ff ED3:ff";
596	2011-01-21 06:26:05	System Cooling Zone Fault	Chassis		Critical	IPMI	The Fan controller resident on System Fan 2 is not responding and is contributing to a System Fan Cooling Zone Fault.	System fan 2	Pull and reinsert system fan 2.	System Cooling Zone Fault	1060	System	Array ( [snsrnum] => f0 [number] => 2 [generator] => 20 [snsrName] => System/IO Cooling Zone [enabled] => Enabled [assert] => Asserted [verb] => is [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:2000 Num:f0 Type:c0 EDir:6f ED1:00 ED2:ff ED3:ff";
597	2011-01-21 06:26:07	Fault Indication: Chassis Mis-configuration Fault LED Asserted	Chassis		Warning	IPMI	Sensor: Fault Indication; There is a chassis mis-configuration that is contributing to the chassis fault LED being lit. This amber LED is located on the front of the chassis and is used to warn of conditions that require attention.	Chassis Sensor: Fault Indication	Using the graphical user interface, mouse over the chassis fault LED to display the cause of the fault. Look for other chassis events that may show the cause of the mis-configuration. Take appropriate actions to clear the condition.	Fault Indication: Chassis Mis-configuration Fault LED Asserted	1056	System	Array ( [snsrnum] => 5c [number] => 1 [generator] => 20 [snsrName] => Fault Indication [enabled] => Enabled [assert] => Asserted [verb] => is [offset] => 0b )	s:68:"Raw IPMI (hex): Gen:2000 Num:5c Type:c0 EDir:6f ED1:0b ED2:ff ED3:ff";
598	2011-01-21 06:26:08	Fault Indication: Chassis Fault LED On	Chassis		Warning	IPMI	Sensor: Fault Indication; The Chassis Fault LED has been illuminated. This amber LED is located on the front of the chassis and is used to warn of conditions that require attention.	Chassis Sensor: Fault Indication	Check the events report for other warning or critical events that may be contributing to the chassis fault. Take appropriate action to clear those events and the fault LED will be turned off.	Fault Indication: Chassis Fault LED On	1602	System	Array ( [snsrnum] => 5b [number] => 1 [generator] => 20 [snsrName] => Fault Indication [enabled] => Enabled [assert] => Asserted [verb] => is [offset] => 01 [lit] => on )	s:68:"Raw IPMI (hex): Gen:2000 Num:5b Type:c0 EDir:6f ED1:01 ED2:ff ED3:ff";
599	2011-01-21 06:26:09	System Cooling Zone Fault Deasserted	Chassis		Info	IPMI	The Fan controller resident on System Fan 2 is responding and no longer contributing to a system cooling zone fault.	System fan 2	No action is required.	System Cooling Zone Fault Deasserted	1061	System	Array ( [snsrnum] => f0 [number] => 2 [generator] => 20 [snsrName] => System/IO Cooling Zone [enabled] => Disabled [assert] => Deasserted [verb] => was [offset] => 00 )	s:68:"Raw IPMI (hex): Gen:2000 Num:f0 Type:c0 EDir:ef ED1:00 ED2:ff ED3:ff";
600	2011-01-21 06:26:10	Fault Indication: Chassis Mis-configuration Fault LED Deasserted	Chassis		Info	IPMI	Sensor: Fault Indication; A chassis mis-configuration condition has been cleared and is no longer contributing to the chassis fault LED being lit. This amber LED is located on the front of the chassis and is used to warn of conditions that require attention.	Chassis Sensor: Fault Indication	No action is required.	Fault Indication: Chassis Mis-configuration Fault LED Deasserted	1057	System	Array ( [snsrnum] => 5c [number] => 1 [generator] => 20 [snsrName] => Fault Indication [enabled] => Disabled [assert] => Deasserted [verb] => was [offset] => 0b )	s:68:"Raw IPMI (hex): Gen:2000 Num:5c Type:c0 EDir:ef ED1:0b ED2:ff ED3:ff";
601	2011-01-21 06:26:11	Fault Indication: Chassis Fault LED Off	Chassis		Info	IPMI	Sensor: Fault Indication; The Chassis Fault LED has been turned Off. This amber LED is located on the front of the chassis and is used to warn of conditions that require attention. All conditions contributing to a previous fault condition have been cleared.	Chassis Sensor: Fault Indication	No action is required	Fault Indication: Chassis Fault LED Off	1603	System	Array ( [snsrnum] => 5b [number] => 1 [generator] => 20 [snsrName] => Fault Indication [enabled] => Disabled [assert] => Deasserted [verb] => was [offset] => 01 [lit] => off )	s:68:"Raw IPMI (hex): Gen:2000 Num:5b Type:c0 EDir:ef ED1:01 ED2:ff ED3:ff";

top

ID ROM Data
----------------------------------------
====================== IDROM 0x00 ======================
CMM:
DID Structure Version #0x00
DID Structure Length: 94
DID Manufacture #0x00 Intel Corporation
Device identifier code 0x002D Chassis CMM
Manufacture date/time (0x49ad1636) Tue Mar  3 11:36:22 2009
Device name: Chassis Management Module
Device part number: D70735-405
                    44 37 30 37 33 35 2D 34 30 35 00 FF FF FF FF FF 
Device serial number: BZBC91000040
                      42 5A 42 43 39 31 30 30 30 30 34 30 00 FF FF FF 
Static maximum power consumes 15 watts
Static nominal power consumes 15 watts
Asset tag # 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
DSD Structure Version (0x00) #0
DSD Structure Length: 15
External (front panel) Ethernet interface: 00:15:17:AA:BB:43
Internal (chassis) Ethernet interface: 00:15:17:AA:BB:42

====================== IDROM 0x01 ======================
Midplane:
DID Structure Version #0x00
DID Structure Length: 94
DID Manufacture #0x00 Intel Corporation
Device identifier code 0x0035 Chassis midplane
Manufacture date/time (0x49a4b6c8) Wed Feb 25 03:11:04 2009
Device name: System Midplane
Device part number: D70484-407
                    44 37 30 34 38 34 2D 34 30 37 00 FF FF FF FF FF 
Device serial number: BZMD90800153
                      42 5A 4D 44 39 30 38 30 30 31 35 33 00 FF FF FF 
Static maximum power [Passive]
Static nominal power [Passive]
Asset tag # 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
DSD Structure Version (0xFE) #0
DSD Structure Length: 3

====================== IDROM 0x10 ======================
Switch #1:
DID Structure Version #0x00
DID Structure Length: 94
DID Manufacture #0x00 Intel Corporation
Device identifier code 0x002E Chassis Switch Module
Manufacture date/time (0x49a5e817) Thu Feb 26 00:53:43 2009
Device name: Gigabit Ethernet Switch
Device part number: D70739-405
                    44 37 30 37 33 39 2D 34 30 35 00 00 00 00 00 00 
Device serial number: BZTC90900024
                      42 5A 54 43 39 30 39 30 30 30 32 34 00 00 00 00 
Static maximum power consumes 54 watts
Static nominal power consumes 26 watts
Asset tag # 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
DSD Structure Version (0x00) #0
DSD Structure Length: 9
Switch management Ethernet port: 00:15:17:AA:A8:84

====================== IDROM 0x11 ======================
ESM2(0x11) IDROM not present

====================== IDROM 0x20 ======================
Storage Controller #1:
DID Structure Version #0x00
DID Structure Length: 94
DID Manufacture #0x00 Intel Corporation
Device identifier code 0x002F Chassis Storage Module
Manufacture date/time (0x49acca9c) Tue Mar  3 06:13:48 2009
Device name: Server Storage Module
Device part number: D70737-408
                    44 37 30 37 33 37 2D 34 30 38 00 00 00 00 00 00 
Device serial number: PRTW90100198
                      50 52 54 57 39 30 31 30 30 31 39 38 00 00 00 00 
Static maximum power consumes 20 watts
Static nominal power consumes 27 watts
Asset tag # 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
DSD Structure Version (0x00) #0
DSD Structure Length: 9
MAC of primary storage controller: 00:15:17:9F:29:BD

====================== IDROM 0x21 ======================
Storage Controller #2:
DID Structure Version #0x00
DID Structure Length: 94
DID Manufacture #0x00 Intel Corporation
Device identifier code 0x002F Chassis Storage Module
Manufacture date/time (0x48288b82) Mon May 12 18:25:06 2008
Device name: Server Storage Module
Device part number: D70737-404
                    44 37 30 37 33 37 2D 34 30 34 00 00 00 00 00 00 
Device serial number: PRTW81900030
                      50 52 54 57 38 31 39 30 30 30 33 30 00 00 00 00 
Static maximum power consumes 20 watts
Static nominal power consumes 27 watts
Asset tag # 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
DSD Structure Version (0x00) #0
DSD Structure Length: 9
MAC of primary storage controller: 00:15:17:77:99:A0

====================== IDROM 0x22 ======================
Interposer:
DID Structure Version #0x00
DID Structure Length: 94
DID Manufacture #0x00 Intel Corporation
Device identifier code 0x0037 Chassis (14 drive) Storage Interposer
Manufacture date/time (0x49aee781) Wed Mar  4 20:41:37 2009
Device name: 14 HDD Interposer 2.5"
Device part number: D70481-405
                    44 37 30 34 38 31 2D 34 30 35 00 00 00 00 00 00 
Device serial number: BZRW91000098
                      42 5A 52 57 39 31 30 30 30 30 39 38 00 00 00 00 
Static maximum power consumes 16 watts
Static nominal power consumes 13 watts
Asset tag # 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
DSD Structure Version (0x00) #0
DSD Structure Length: 25
floating MAC: 00:15:17:AA:AE:54
Globally unique ID: 20 00 00 15 17 AA AE 54 00 00 00 00 00 00 00 00

====================== IDROM 0x23 ======================
Drive Backplane:
DID Structure Version #0x00
DID Structure Length: 94
DID Manufacture #0x00 Intel Corporation
Device identifier code 0x0038 Chassis Storage 14 Drive Backplane
Manufacture date/time (0x4962f789) Tue Jan  6 06:17:45 2009
Device name: 14 HDD Backplane 2.5"
Device part number: D70727-303
                    44 37 30 37 32 37 2D 33 30 33 00 00 00 00 00 00 
Device serial number: BZRW85120003
                      42 5A 52 57 38 35 31 32 30 30 30 33 00 00 00 00 
Static maximum power [Passive]
Static nominal power [Passive]
Asset tag # 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
DSD Structure Version (0xFE) #0
DSD Structure Length: 3

====================== IDROM 0x25 ======================
Storage Controller #1 Battery:
DID Structure Version #0x00
DID Structure Length: 94
DID Manufacture #0x00 Intel Corporation
Device identifier code 0x003A Chassis storage controller optional battery
Manufacture date/time (0x4909b0ff) Thu Oct 30 13:05:03 2008
Device name: SCM Battery
Device part number: G32800011004103
                    47 33 32 38 30 30 30 31 31 30 30 34 31 30 33 00 
Device serial number: HLX0839O0563000
                      48 4C 58 30 38 33 39 4F 30 35 36 33 30 30 30 00 
Static maximum power [Unknown]
Static nominal power [Unknown]
Asset tag # 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
DSD Structure Version (0x00) #0
DSD Structure Length: 13
Number of Battery cells: 2
Battery voltage: 3700 mV
Battery capacity 4400 mAh
Minimum Operating temperature: 0C
Maximum Operating temperature: 70C
Minimum stage of charge before shipping: 30%
Maximum stage of charge before shipping: 70%

====================== IDROM 0x26 ======================
Storage Controller #2 Battery:
DID Structure Version #0x00
DID Structure Length: 94
DID Manufacture #0x00 Intel Corporation
Device identifier code 0x003A Chassis storage controller optional battery
Manufacture date/time (0x47c5c456) Wed Feb 27 20:13:10 2008
Device name: SCM Battery
Device part number: G32800011003712
                    47 33 32 38 30 30 30 31 31 30 30 33 37 31 32 00 
Device serial number: ETI0808O1079000
                      45 54 49 30 38 30 38 4F 31 30 37 39 30 30 30 00 
Static maximum power [Unknown]
Static nominal power [Unknown]
Asset tag # 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
DSD Structure Version (0x00) #0
DSD Structure Length: 13
Number of Battery cells: 2
Battery voltage: 3700 mV
Battery capacity 4400 mAh
Minimum Operating temperature: 0C
Maximum Operating temperature: 70C
Minimum stage of charge before shipping: 30%
Maximum stage of charge before shipping: 70%

====================== IDROM 0x30 ======================
System Fan #1:
DID Structure Version #0x00
DID Structure Length: 94
DID Manufacture #0x00 Intel Corporation
Device identifier code 0x0033 Chassis Fan Control Module
Manufacture date/time (0x49ae87ca) Wed Mar  4 13:53:14 2009
Device name: Fan Control Board
Device part number: D70745-404
                    44 37 30 37 34 35 2D 34 30 34 00 FF FF FF FF FF 
Device serial number: BZRW90980971
                      42 5A 52 57 39 30 39 38 30 39 37 31 00 FF FF FF 
Static maximum power [Unknown]
Static nominal power [Unknown]
Asset tag # 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
DSD Structure Version (0xFE) #0
DSD Structure Length: 3

====================== IDROM 0x31 ======================
System Fan #2:
DID Structure Version #0x00
DID Structure Length: 94
DID Manufacture #0x00 Intel Corporation
Device identifier code 0x0033 Chassis Fan Control Module
Manufacture date/time (0x49accf66) Tue Mar  3 06:34:14 2009
Device name: Fan Control Board
Device part number: D70745-404
                    44 37 30 37 34 35 2D 34 30 34 00 FF FF FF FF FF 
Device serial number: BZRW90981287
                      42 5A 52 57 39 30 39 38 31 32 38 37 00 FF FF FF 
Static maximum power [Unknown]
Static nominal power [Unknown]
Asset tag # 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
DSD Structure Version (0xFE) #0
DSD Structure Length: 3

====================== IDROM 0x32 ======================
I/O Fan:
DID Structure Version #0x00
DID Structure Length: 94
DID Manufacture #0x00 Intel Corporation
Device identifier code 0x0033 Chassis Fan Control Module
Manufacture date/time (0x49ac9fca) Tue Mar  3 03:11:06 2009
Device name: Fan Control Board
Device part number: D70745-404
                    44 37 30 37 34 35 2D 34 30 34 00 FF FF FF FF FF 
Device serial number: BZRW85180146
                      42 5A 52 57 38 35 31 38 30 31 34 36 00 FF FF FF 
Static maximum power [Unknown]
Static nominal power [Unknown]
Asset tag # 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
DSD Structure Version (0xFE) #0
DSD Structure Length: 3

====================== IDROM 0x40 ======================
FANBLANK1(0x40) IDROM not present

====================== IDROM 0x41 ======================
FANBLANK2(0x41) IDROM not present

====================== IDROM 0x42 ======================
Fan Blank #3:
DID Structure Version #0x00
DID Structure Length: 94
DID Manufacture #0x00 Intel Corporation
Device identifier code 0x0033 Chassis Fan Control Module
Manufacture date/time (0x4ad8ddd2) Fri Oct 16 20:55:46 2009
Device name: Fan Control Board
Device part number: D70745-404
                    44 37 30 37 34 35 2D 34 30 34 00 FF FF FF FF FF 
Device serial number: BZRW94280875
                      42 5A 52 57 39 34 32 38 30 38 37 35 00 FF FF FF 
Static maximum power [Unknown]
Static nominal power [Unknown]
Asset tag # 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
DSD Structure Version (0xFE) #0
DSD Structure Length: 3

====================== IDROM 0x43 ======================
Fan Blank #4:
DID Structure Version #0x00
DID Structure Length: 94
DID Manufacture #0x00 Intel Corporation
Device identifier code 0x0033 Chassis Fan Control Module
Manufacture date/time (0x4ad8b70f) Fri Oct 16 18:10:23 2009
Device name: Fan Control Board
Device part number: D70745-404
                    44 37 30 37 34 35 2D 34 30 34 00 FF FF FF FF FF 
Device serial number: BZRW94280607
                      42 5A 52 57 39 34 32 38 30 36 30 37 00 FF FF FF 
Static maximum power [Unknown]
Static nominal power [Unknown]
Asset tag # 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
DSD Structure Version (0xFE) #0
DSD Structure Length: 3

====================== IDROM 0x50 ======================
Power Supply #1:
DID Structure Version #0x00
DID Structure Length: 94
DID Manufacture #0x00 Intel Corporation
Device identifier code 0x0036 Chassis power supply
Manufacture date/time (0x4999be1e) Mon Feb 16 19:27:26 2009
Device name: Power Supply
Device part number: D73299-005
                    44 37 33 32 39 39 2D 30 30 35 00 00 00 00 00 00 
Device serial number: DLD0907000673
                      44 4C 44 30 39 30 37 30 30 30 36 37 33 00 00 00 
Static maximum power generates 1000 watts
Static nominal power generates 1000 watts
Asset tag # 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
DSD Structure Version (0xFE) #0
DSD Structure Length: 3

====================== IDROM 0x51 ======================
Power Supply #2:
DID Structure Version #0x00
DID Structure Length: 94
DID Manufacture #0x00 Intel Corporation
Device identifier code 0x0036 Chassis power supply
Manufacture date/time (0x4999bd14) Mon Feb 16 19:23:00 2009
Device name: Power Supply
Device part number: D73299-005
                    44 37 33 32 39 39 2D 30 30 35 00 00 00 00 00 00 
Device serial number: DLD0907000764
                      44 4C 44 30 39 30 37 30 30 30 37 36 34 00 00 00 
Static maximum power generates 1000 watts
Static nominal power generates 1000 watts
Asset tag # 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
DSD Structure Version (0xFE) #0
DSD Structure Length: 3

====================== IDROM 0x52 ======================
PWR3(0x52) IDROM not present

====================== IDROM 0x53 ======================
PWR4(0x53) IDROM not present

====================== IDROM 0x80 ======================
Computer Blade #1:
DID Structure Version #0x00
DID Structure Length: 94
DID Manufacture #0x00 Intel Corporation
Device identifier code 0x003C Chassis Victor Island blade
Manufacture date/time (0x4a51b09f) Mon Jul  6 08:06:55 2009
Device name: MFS5520VI Compute Module
Device part number: E41515-402
                    45 34 31 35 31 35 2D 34 30 32 00 00 00 00 00 00 
Device serial number: BZVI92700023
                      42 5A 56 49 39 32 37 30 30 30 32 33 00 00 00 00 
Static maximum power consumes 425 watts
Static nominal power consumes 340 watts
Asset tag # 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
DSD Structure Version (0xFE) #0
DSD Structure Length: 3

====================== IDROM 0x81 ======================
Computer Blade #1 Mezzanine board:
DID Structure Version #0x00
DID Structure Length: 94
DID Manufacture #0x00 Intel Corporation
Device identifier code 0x003D Chassis Victor Island Mezzanine card
Manufacture date/time (0x4918efc7) Tue Nov 11 02:36:55 2008
Device name: Ethernet Mezzanine Card
Device part number: E41517-301
                    45 34 31 35 31 37 2D 33 30 31 00 00 00 00 00 00 
Device serial number: BZV191800044
                      42 5A 56 31 39 31 38 30 30 30 34 34 00 00 00 00 
Static maximum power consumes 3 watts
Static nominal power consumes 2 watts
Asset tag # 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
DSD Structure Version (0xFE) #0
DSD Structure Length: 3

====================== IDROM 0x84 ======================
Computer Blade #2:
DID Structure Version #0x00
DID Structure Length: 94
DID Manufacture #0x00 Intel Corporation
Device identifier code 0x003C Chassis Victor Island blade
Manufacture date/time (0x4a42189a) Wed Jun 24 12:14:18 2009
Device name: MFS5520VI Compute Module
Device part number: E41515-402
                    45 34 31 35 31 35 2D 34 30 32 00 00 00 00 00 00 
Device serial number: BZVI92500081
                      42 5A 56 49 39 32 35 30 30 30 38 31 00 00 00 00 
Static maximum power consumes 425 watts
Static nominal power consumes 340 watts
Asset tag # 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
DSD Structure Version (0xFE) #0
DSD Structure Length: 3

====================== IDROM 0x85 ======================
Computer Blade #2 Mezzanine board:
DID Structure Version #0x00
DID Structure Length: 94
DID Manufacture #0x00 Intel Corporation
Device identifier code 0x003D Chassis Victor Island Mezzanine card
Manufacture date/time (0x4918ea6b) Tue Nov 11 02:14:03 2008
Device name: Ethernet Mezzanine Card
Device part number: E41517-301
                    45 34 31 35 31 37 2D 33 30 31 00 00 00 00 00 00 
Device serial number: BZV191900027
                      42 5A 56 31 39 31 39 30 30 30 32 37 00 00 00 00 
Static maximum power consumes 3 watts
Static nominal power consumes 2 watts
Asset tag # 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
DSD Structure Version (0xFE) #0
DSD Structure Length: 3

====================== IDROM 0x88 ======================
Computer Blade #3:
DID Structure Version #0x00
DID Structure Length: 94
DID Manufacture #0x00 Intel Corporation
Device identifier code 0x003C Chassis Victor Island blade
Manufacture date/time (0x4a423518) Wed Jun 24 14:15:52 2009
Device name: MFS5520VI Compute Module
Device part number: E41515-402
                    45 34 31 35 31 35 2D 34 30 32 00 00 00 00 00 00 
Device serial number: BZVI92500055
                      42 5A 56 49 39 32 35 30 30 30 35 35 00 00 00 00 
Static maximum power consumes 425 watts
Static nominal power consumes 340 watts
Asset tag # 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
DSD Structure Version (0xFE) #0
DSD Structure Length: 3

====================== IDROM 0x89 ======================
Computer Blade #3 Mezzanine board:
DID Structure Version #0x00
DID Structure Length: 94
DID Manufacture #0x00 Intel Corporation
Device identifier code 0x003D Chassis Victor Island Mezzanine card
Manufacture date/time (0x4919b9a2) Tue Nov 11 16:58:10 2008
Device name: Ethernet Mezzanine Card
Device part number: E41517-301
                    45 34 31 35 31 37 2D 33 30 31 00 00 00 00 00 00 
Device serial number: BZV191800202
                      42 5A 56 31 39 31 38 30 30 32 30 32 00 00 00 00 
Static maximum power consumes 3 watts
Static nominal power consumes 2 watts
Asset tag # 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
DSD Structure Version (0xFE) #0
DSD Structure Length: 3

====================== IDROM 0x8C ======================
BLADE4(0x8C) IDROM not present

====================== IDROM 0x8D ======================
BLADE4MEZ(0x8D) IDROM not present

====================== IDROM 0x90 ======================
BLADE5(0x90) IDROM not present

====================== IDROM 0x91 ======================
BLADE5MEZ(0x91) IDROM not present

====================== IDROM 0x94 ======================
BLADE6(0x94) IDROM not present

====================== IDROM 0x95 ======================
BLADE6MEZ(0x95) IDROM not present

top

SD Card Utilization
----------------------------------------
20%

top

Dashboard
----------------------------------------

--Required Actions--
Change Admin Password - The admin user is still using the default password.  It is recommended that a strong password be chosen for the admin user.  Click here to manage users.


--System Health--
Server 1: OK, ON
Server 2: OK, ON
Server 3: OK, OFF
Not Present
Not Present
Not Present
Switch 1: OK
Switch 2: Not Present

Power Supply 1: OK , Powered
Power Supply 2: OK , Powered
PS3-Fan Blank: OK 
PS4-Fan Blank: OK 
Front IO Fan: OK
Upper Rear System Fan: OK
Lower Rear System Fan: OK


--Power Load--
Current Load (power currently being used): 392.985 W
Max Expected Load (based on hardware configuration): 1615 W
PS 1: 206 W (OK)
PS 2: 187 W (OK)
PS 3 (Fan): 0 W (OK)
PS 4 (Fan): 0 W (OK)


--Temperature--
Temperatures in degrees C
Ambient: 22
Blade 1: good
Blade 2: good
Blade 3: good
Blade 4: --
Blade 5: --
Blade 6: --
Drive 1: 33
Drive 2: 34
Drive 3: 34
Drive 4: 34
Drive 5: 34
Drive 6: 29
Drive 7: --
Drive 8: --
Drive 9: --
Drive 10: --
Drive 11: --
Drive 12: --
Drive 13: --
Drive 14: --

top

Firmware Page
----------------------------------------

Current Build Version: 6.6.100.20101015.23953

Component	Subsystem	Status	Current Version
Server 1	BMC Firmware	ok	1.20.1
	BMC Boot	ok	0.28
	BIOS	ok	S5500.86B.01.00.0054.092820101104
Server 2	BMC Firmware	ok	1.20.1
	BMC Boot	ok	0.28
	BIOS	ok	S5500.86B.01.00.0054.092820101104
Server 3	BMC Firmware	ok	1.20.1
	BMC Boot	ok	0.28
	BIOS	ok	S5500.86B.01.00.0054.092820101104
Server 4	BMC Firmware	not present	--
	BMC Boot	not present	--
	BIOS	not present	--
Server 5	BMC Firmware	not present	--
	BMC Boot	not present	--
	BIOS	not present	--
Server 6	BMC Firmware	not present	--
	BMC Boot	not present	--
	BIOS	not present	--
Switch 1	Firmware	ok	1.0.0.27
	Boot	ok	1.0.0.6
Switch 2	Firmware	not present	--
	Boot	not present	--
Storage Control Module 1	Firmware	ok	3.7.140.6
Storage Control Module 2	Firmware	ok	3.7.140.6
System Fan 1	Firmware	ok	1.2
	Boot	ok	1.2
System Fan 2	Firmware	ok	1.2
	Boot	ok	1.2
I/O Fan	Firmware	ok	1.2
	Boot	ok	1.2
Power Supply 1	Firmware	not applicable FW information is available only for power supply blanks and not for power supplies.	--
	Boot	not applicable FW information is available only for power supply blanks and not for power supplies.	--
Power Supply 2	Firmware	not applicable FW information is available only for power supply blanks and not for power supplies.	--
	Boot	not applicable FW information is available only for power supply blanks and not for power supplies.	--
Power Supply Blank 3	Firmware	ok	1.2
	Boot	ok	1.2
Power Supply Blank 4	Firmware	ok	1.2
	Boot	ok	1.2

top

All Component Status
----------------------------------------

Component	Status
Server 1	Server is Operating Properly Server is Powered On Remote KVM: No session is active Remote Serial: No session is active Total RAM: 49152 MB
Server 2	Server is Operating Properly Server is Powered On Remote KVM: No session is active Remote Serial: No session is active Total RAM: 49152 MB
Server 3	Server is Powered Off Remote KVM: No session is active Remote Serial: No session is active Total RAM: 24576 MB
Server 4	Server is Not Present
Server 5	Server is Not Present
Server 6	Server is Not Present
Switch 1	Switch is Operating Properly
Switch 2	Switch is Not Present
Storage Controller 1	Status: OK
Storage Controller 2	Status: OK
Chassis	Chassis Components are Operating Properly
System Fan 1	Fan is Operating Properly
System Fan 2	Fan is Operating Properly
IO Fan	Fan is Operating Properly
Power Supply 1	Power Supply is Operating Properly
Power Supply 2	Power Supply is Operating Properly
Power Supply 3	Fan is Operating Properly
Power Supply 4	Fan is Operating Properly
Control Module	Chassis Management Module is Operating Properly
Drive 1	Type: Fujitsu MBB2147RC Serial Number: BS00P91029YB Protocol: SAS Size: 135.97GB Role: Member of Storage Pool Drive is operating properly
Drive 2	Type: Fujitsu MBB2147RC Serial Number: BS00P8C024KP Protocol: SAS Size: 135.97GB Role: Member of Storage Pool Drive is operating properly
Drive 3	Type: Fujitsu MBB2147RC Serial Number: BS00P8A020VE Protocol: SAS Size: 135.97GB Role: Member of Storage Pool Drive is operating properly
Drive 4	Type: Fujitsu MBB2147RC Serial Number: BS00P8C024KJ Protocol: SAS Size: 135.97GB Role: Member of Storage Pool Drive is operating properly
Drive 5	Type: Fujitsu MBB2147RC Serial Number: BS00P8A01YA2 Protocol: SAS Size: 135.97GB Role: Member of Storage Pool Drive is operating properly
Drive 6	Type: Fujitsu MBD2147RC Serial Number: D0A0PA201SMH Protocol: SAS Size: 135.97GB Role: Global Hot Spare (revertible) Drive is operating properly
Drive 7
Drive 8
Drive 9
Drive 10
Drive 11
Drive 12
Drive 13
Drive 14

top

Component Data - Blade 1
----------------------------------------

Product Data
Property	Value
Status	OK, ON
Remote KVM	No session is active
Remote Serial Console	No session is active
Product Name	MFS5520VI Compute Module
Manufacturer	Intel Corporation
Manufacture Date	2009-07-06 08:06:55 AM
Part Number	E41515-402
Serial Number	BZVI92700023
Asset Tag
Management Firmware Version	1.20.1
Management FW Boot Version	0.28
Server SAS Initiator ID 1 (for SCM1)	5001517BA602C002
Server SAS Initiator ID 2 (for SCM2)	5001517BA602C003
Total size of all physical memory	49152 MB

Server Processors
Socket	Status	Description	Cores	Voltage	Characteristics	Part#	Serial#
CPU1	Enabled	Intel(R) Xeon(R) CPU E5530 @ 2.40GHz	4	1.2V	64-bit capable
CPU2	Enabled	Intel(R) Xeon(R) CPU E5530 @ 2.40GHz	4	1.2V	64-bit capable

Server Memory
Slot	Present	Type	Size	Data Width	Speed	Manuf. ID	Part#	Serial#
DIMM_A1	Yes	DDR3	4096MB	64	800MHz	0x0000	AL12M72H8BJF8S	0x00000000
DIMM_A2	Yes	DDR3	4096MB	64	800MHz	0x0000	AL12M72H8BJF8S	0x00000000
DIMM_B1	Yes	DDR3	4096MB	64	800MHz	0x0000	AL12M72H8BJF8S	0x00000000
DIMM_B2	Yes	DDR3	4096MB	64	800MHz	0x0000	AL12M72H8BJF8S	0x00000000
DIMM_C1	Yes	DDR3	4096MB	64	800MHz	0x0000	AL12M72H8BJF8S	0x00000000
DIMM_C2	Yes	DDR3	4096MB	64	800MHz	0x0000	AL12M72H8BJF8S	0x00000000
DIMM_D1	Yes	DDR3	4096MB	64	800MHz	0x0000	AL12M72H8BJF8S	0x00000000
DIMM_D2	Yes	DDR3	4096MB	64	800MHz	0x0000	AL12M72H8BJF8S	0x00000000
DIMM_E1	Yes	DDR3	4096MB	64	800MHz	0x0000	AL12M72H8BJF8S	0x00000000
DIMM_E2	Yes	DDR3	4096MB	64	800MHz	0x0000	AL12M72H8BJF8S	0x00000000
DIMM_F1	Yes	DDR3	4096MB	64	800MHz	0x0000	AL12M72H8BJF8S	0x00000000
DIMM_F2	Yes	DDR3	4096MB	64	800MHz	0x0000	AL12M72H8BJF8S	0x00000000

Last 40 non-Closed Events for Server 1
Id	Date	Severity	Description
547	2011-01-15 12:27:54	Info	KVM Session sensor - Session Ended Normally
536	2011-01-15 11:21:43	Info	Action 'Reset' on 'Server 1' by user 'admin'
525	2011-01-15 11:18:17	Info	Action 'Reset' on 'Server 1' by user 'admin'
524	2011-01-15 11:18:08	Info	KVM Session sensor - Session Established
523	2011-01-15 11:18:07	Info	KVM Session sensor - Session Pending
522	2011-01-15 09:45:42	Info	KVM Session sensor - Session Ended Normally
515	2011-01-15 09:41:42	Info	Action 'Reset' on 'Server 1' by user 'admin'
514	2011-01-15 09:41:37	Info	KVM Session sensor - Session Established
513	2011-01-15 09:41:36	Info	KVM Session sensor - Session Pending
512	2011-01-14 17:39:41	Info	KVM Session sensor - Session Ended Normally
507	2011-01-14 17:32:04	Info	KVM Session sensor - Session Established
506	2011-01-14 17:32:03	Info	KVM Session sensor - Session Pending
505	2011-01-14 17:31:27	Info	Action 'Power On' on 'Server 1' by user 'admin'
504	2011-01-14 17:31:26	Info	Server Power Up
497	2011-01-14 17:25:36	Info	Server 1 detected
494	2011-01-14 17:25:01	Info	Server 1 removed
491	2011-01-14 17:24:48	Info	Action 'Power Off' on 'Server 1' by user 'admin'
490	2011-01-14 17:24:47	Info	Server Power Off
479	2011-01-14 17:18:44	Info	KVM Session sensor - Session Established
478	2011-01-14 17:18:43	Info	KVM Session sensor - Session Pending
477	2011-01-13 15:46:37	Info	KVM Session sensor - Session Ended Normally
473	2011-01-13 15:35:08	Info	KVM Session sensor - Session Established
471	2011-01-13 15:35:03	Info	Action 'Reset' on 'Server 1' by user 'admin'
470	2011-01-13 15:35:03	Info	KVM Session sensor - Session Pending
448	2011-01-08 16:38:31	Info	KVM Session sensor - Session Ended Normally
404	2011-01-08 14:36:40	Info	KVM Session sensor - Session Established
403	2011-01-08 14:36:39	Info	KVM Session sensor - Session Pending
315	2010-12-26 14:48:51	Info	Action 'Power On/Off Multiple Servers' on 'Server 1' by user 'admin'
279	2010-12-26 13:29:13	Info	KVM Session sensor - Session Ended Normally
261	2010-12-26 11:40:54	Info	Action 'Reset' on 'Server 1' by user 'admin'
250	2010-12-26 10:30:43	Info	Action 'Reset' on 'Server 1' by user 'admin'
208	2010-12-26 09:42:19	Info	KVM Session sensor - Session Established
207	2010-12-26 09:42:18	Info	KVM Session sensor - Session Pending
191	2010-12-26 09:36:02	Info	Action 'Reset' on 'Server 1' by user 'admin'
107	2010-12-25 16:57:38	Info	KVM Session sensor - Session Ended Normally
94	2010-12-25 16:31:08	Info	KVM Session sensor - Session Established
93	2010-12-25 16:31:05	Info	KVM Session sensor - Session Pending
91	2010-12-25 16:30:31	Info	Server Power Up
90	2010-12-25 16:30:32	Info	Action 'Power On/Off Multiple Servers' on 'Server 1' by user 'admin'
89	2010-12-25 16:30:29	Info	KVM Session sensor - Session Ended Normally

Sensor Values
Sensor	Value	Units	Min. Expected	Max. Expected
CPU 1 +1.1V Vccp	0.92	Volts	0.671000	1.518900
CPU 2 +1.1V Vccp	0.91	Volts	0.671000	1.518900
CPU 1 +1.5V DDR3	1.51	Volts	1.204360	1.613860
CPU 2 +1.5V DDR3	1.51	Volts	1.204360	1.613860
+1.8V AUX	1.77	Volts	1.675900	1.922300
+3.3V	3.2	Volts	2.938700	3.567900
+3.3V STBY	3.22	Volts	2.938700	3.567900
VBAT	2.93	Volts	2.138500	3.230500
+5V	5.23	Volts	4.659400	5.703600
+5V STBY	4.95	Volts	4.497000	5.310200
+12V	11.73	Volts	10.583000	13.079000

Virtual Drive To Server Mappings
Name	Size	RAID Level	Status	Server	Drive #(LUN)	Visible	Affinity/Active
Server1	45.00GB	RAID1	OK	1	0	Yes	SCM 1/SCM 1
Daten	100.00GB	RAID5	OK	1	1	Yes	SCM 2/SCM 1

Available Actions
Action
Power Off
Reset
Remote Serial Console
Remote KVM & CD
Identify
Server Failover
Power On/Off Multiple Servers

Component Data - Blade 2
----------------------------------------

Product Data
Property	Value
Status	OK, ON
Remote KVM	No session is active
Remote Serial Console	No session is active
Product Name	MFS5520VI Compute Module
Manufacturer	Intel Corporation
Manufacture Date	2009-06-24 12:14:18 PM
Part Number	E41515-402
Serial Number	BZVI92500081
Asset Tag
Management Firmware Version	1.20.1
Management FW Boot Version	0.28
Server SAS Initiator ID 1 (for SCM1)	5001517BA1F90002
Server SAS Initiator ID 2 (for SCM2)	5001517BA1F90003
Total size of all physical memory	49152 MB

Server Processors
Socket	Status	Description	Cores	Voltage	Characteristics	Part#	Serial#
CPU1	Enabled	Intel(R) Xeon(R) CPU E5530 @ 2.40GHz	4	1.2V	64-bit capable
CPU2	Enabled	Intel(R) Xeon(R) CPU E5530 @ 2.40GHz	4	1.2V	64-bit capable

Server Memory
Slot	Present	Type	Size	Data Width	Speed	Manuf. ID	Part#	Serial#
DIMM_A1	Yes	DDR3	4096MB	64	800MHz	0x0000	AL12M72H8BJF8S	0x00000000
DIMM_A2	Yes	DDR3	4096MB	64	800MHz	0x0000	AL12M72H8BJF8S	0x00000000
DIMM_B1	Yes	DDR3	4096MB	64	800MHz	0x0000	AL12M72H8BJF8S	0x00000000
DIMM_B2	Yes	DDR3	4096MB	64	800MHz	0x0000	AL12M72H8BJF8S	0x00000000
DIMM_C1	Yes	DDR3	4096MB	64	800MHz	0x0000	AL12M72H8BJF8S	0x00000000
DIMM_C2	Yes	DDR3	4096MB	64	800MHz	0x0000	AL12M72H8BJF8S	0x00000000
DIMM_D1	Yes	DDR3	4096MB	64	800MHz	0x0000	AL12M72H8BJF8S	0x00000000
DIMM_D2	Yes	DDR3	4096MB	64	800MHz	0x0000	AL12M72H8BJF8S	0x00000000
DIMM_E1	Yes	DDR3	4096MB	64	800MHz	0x0000	AL12M72H8BJF8S	0x00000000
DIMM_E2	Yes	DDR3	4096MB	64	800MHz	0x0000	AL12M72H8BJF8S	0x00000000
DIMM_F1	Yes	DDR3	4096MB	64	800MHz	0x0000	AL12M72H8BJF8S	0x00000000
DIMM_F2	Yes	DDR3	4096MB	64	800MHz	0x0000	AL12M72H8BJF8S	0x00000000

Last 40 non-Closed Events for Server 2
Id	Date	Severity	Description
570	2011-01-17 16:57:52	Info	KVM Session sensor - Session Ended Normally
561	2011-01-17 16:41:13	Info	KVM Session sensor - Session Established
560	2011-01-17 16:41:12	Info	KVM Session sensor - Session Pending
557	2011-01-17 16:40:48	Info	Action 'Terminate KVM Session' on 'Server 2' by user 'admin'
556	2011-01-17 16:40:43	Info	KVM Session sensor - Session Ended Normally
553	2011-01-17 16:37:31	Info	KVM Session sensor - Session Established
552	2011-01-17 16:37:30	Info	KVM Session sensor - Session Pending
449	2011-01-08 16:38:34	Info	KVM Session sensor - Session Ended Normally
406	2011-01-08 14:37:07	Info	KVM Session sensor - Session Established
405	2011-01-08 14:37:06	Info	KVM Session sensor - Session Pending
373	2011-01-08 11:41:57	Info	KVM Session sensor - Invalid session ticket
372	2011-01-08 11:41:56	Info	KVM Session sensor - Session Pending
371	2011-01-08 11:13:22	Info	KVM Session sensor - Session Expired
278	2010-12-26 13:29:10	Info	KVM Session sensor - Session Ended Normally
219	2010-12-26 09:55:43	Info	Action 'Reset' on 'Server 2' by user 'admin'
218	2010-12-26 09:55:39	Info	KVM Session sensor - Session Established
217	2010-12-26 09:55:37	Info	KVM Session sensor - Session Pending
108	2010-12-25 16:57:40	Info	KVM Session sensor - Session Ended Normally
96	2010-12-25 16:31:23	Info	KVM Session sensor - Session Established
95	2010-12-25 16:31:21	Info	KVM Session sensor - Session Pending
92	2010-12-25 16:30:33	Info	Server Power Up

Sensor Values
Sensor	Value	Units	Min. Expected	Max. Expected
CPU 1 +1.1V Vccp	0.95	Volts	0.671000	1.518900
CPU 2 +1.1V Vccp	0.92	Volts	0.671000	1.518900
CPU 1 +1.5V DDR3	1.52	Volts	1.204360	1.613860
CPU 2 +1.5V DDR3	1.52	Volts	1.204360	1.613860
+1.8V AUX	1.78	Volts	1.675900	1.922300
+3.3V	3.18	Volts	2.938700	3.567900
+3.3V STBY	3.21	Volts	2.938700	3.567900
VBAT	2.93	Volts	2.138500	3.230500
+5V	5.2	Volts	4.659400	5.703600
+5V STBY	4.95	Volts	4.497000	5.310200
+12V	11.78	Volts	10.583000	13.079000

Virtual Drive To Server Mappings
Name	Size	RAID Level	Status	Server	Drive #(LUN)	Visible	Affinity/Active
Server2	45.00GB	RAID1	OK	2	0	Yes	SCM 1/SCM 1
Daten	100.00GB	RAID5	OK	2	1	Yes	SCM 2/SCM 1

Available Actions
Action
Power Off
Reset
Remote Serial Console
Remote KVM & CD
Identify
Server Failover
Power On/Off Multiple Servers

Component Data - Blade 3
----------------------------------------

Product Data
Property	Value
Status	OK, OFF
Remote KVM	No session is active
Remote Serial Console	No session is active
Product Name	MFS5520VI Compute Module
Manufacturer	Intel Corporation
Manufacture Date	2009-06-24 02:15:52 PM
Part Number	E41515-402
Serial Number	BZVI92500055
Asset Tag
Management Firmware Version	1.20.1
Management FW Boot Version	0.28
Server SAS Initiator ID 1 (for SCM1)	Unavailable (server is not powered on)
Server SAS Initiator ID 2 (for SCM2)	Unavailable (server is not powered on)
Total size of all physical memory	24576 MB

Server Processors
Socket	Status	Description	Cores	Voltage	Characteristics	Part#	Serial#
CPU1	Enabled	Intel(R) Xeon(R) CPU E5506 @ 2.13GHz	4	1.2V	64-bit capable
CPU2	Enabled	Intel(R) Xeon(R) CPU E5506 @ 2.13GHz	4	1.2V	64-bit capable

Server Memory
Slot	Present	Type	Size	Data Width	Speed	Manuf. ID	Part#	Serial#
DIMM_A1	Yes	DDR3	4096MB	64	800MHz	0x0000	AL12M72H8BJF8S	0x00000000
DIMM_A2	No
DIMM_B1	Yes	DDR3	4096MB	64	800MHz	0x0000	AL12M72H8BJF8S	0x00000000
DIMM_B2	No
DIMM_C1	Yes	DDR3	4096MB	64	800MHz	0x0000	AL12M72H8BJF8S	0x00000000
DIMM_C2	No
DIMM_D1	Yes	DDR3	4096MB	64	800MHz	0x0000	AL12M72H8BJF8S	0x00000000
DIMM_D2	No
DIMM_E1	Yes	DDR3	4096MB	64	800MHz	0x0000	AL12M72H8BJF8S	0x00000000
DIMM_E2	No
DIMM_F1	Yes	DDR3	4096MB	64	800MHz	0x0000	AL12M72H8BJF8S	0x00000000
DIMM_F2	No

Last 40 non-Closed Events for Server 3
Id	Date	Severity	Description
595	2011-01-20 17:02:48	Info	Server Power Off
592	2011-01-20 17:02:44	Info	OS Graceful shutdown.
591	2011-01-20 16:02:14	Info	OS Booted from HDD device
582	2011-01-20 16:00:22	Info	Action 'Power On' on 'Server 3' by user 'admin'
581	2011-01-20 16:00:21	Info	Server Power Up
580	2011-01-18 17:11:13	Info	Server Power Off
577	2011-01-18 17:11:03	Info	OS Graceful shutdown.
551	2011-01-16 16:44:51	Info	KVM Session sensor - Session Ended Normally
550	2011-01-16 16:27:14	Info	KVM Session sensor - Session Established
549	2011-01-16 16:27:13	Info	KVM Session sensor - Session Pending
467	2011-01-10 14:28:47	Info	KVM Session sensor - Session Ended Normally
466	2011-01-10 08:40:07	Info	OS Booted from HDD device
455	2011-01-10 08:37:56	Info	OS Graceful shutdown.
454	2011-01-10 08:32:09	Info	KVM Session sensor - Session Established
453	2011-01-10 08:32:08	Info	KVM Session sensor - Session Pending
450	2011-01-08 16:51:11	Info	KVM Session sensor - Session Ended Normally
447	2011-01-08 16:08:41	Info	OS Booted from HDD device
436	2011-01-08 16:06:23	Info	OS Graceful shutdown.
435	2011-01-08 16:01:41	Info	OS Booted from HDD device
424	2011-01-08 15:38:12	Info	OS Booted from HDD device
415	2011-01-08 15:35:43	Info	KVM Session sensor - Session Established
414	2011-01-08 15:35:42	Info	KVM Session sensor - Session Pending
413	2011-01-08 15:34:45	Info	Action 'Power On' on 'Server 3' by user 'admin'
412	2011-01-08 15:34:44	Info	Server Power Up
411	2011-01-08 15:34:11	Info	KVM Session sensor - Session Ended Normally
408	2011-01-08 15:32:24	Info	Server Power Off
407	2011-01-08 15:32:20	Info	OS Graceful shutdown.
402	2011-01-08 14:31:39	Info	OS Booted from HDD device
391	2011-01-08 13:02:25	Info	Action 'Reset' on 'Server 3' by user 'admin'
382	2011-01-08 13:00:48	Info	KVM Session sensor - Session Established
381	2011-01-08 13:00:47	Info	KVM Session sensor - Session Pending
380	2011-01-08 13:00:28	Info	Server Power Up
379	2011-01-08 13:00:27	Info	Action 'Power On' on 'Server 3' by user 'admin'
378	2011-01-08 12:58:54	Info	KVM Session sensor - Session Ended Normally
377	2011-01-08 12:04:57	Info	Server Power Off
374	2011-01-08 12:04:53	Info	OS Graceful shutdown.
370	2011-01-08 11:10:30	Info	KVM Session sensor - Session Established
369	2011-01-08 11:10:29	Info	KVM Session sensor - Session Pending
368	2011-01-08 11:04:25	Info	OS Booted from HDD device
359	2011-01-08 11:02:24	Info	Action 'Power On' on 'Server 3' by user 'admin'

Sensor Values
Sensor	Value	Units	Min. Expected	Max. Expected
+3.3V STBY	3.24	Volts	2.938700	3.567900
+5V STBY	4.95	Volts	4.497000	5.310200

Virtual Drive To Server Mappings
Name	Size	RAID Level	Status	Server	Drive #(LUN)	Visible	Affinity/Active
Server3	45.00GB	RAID1	OK	3	0	Yes	SCM 1/SCM 1
Daten	100.00GB	RAID5	OK	3	1	Yes	SCM 2/SCM 1

Available Actions
Action
Power On
Remote Serial Console
Remote KVM & CD
Identify
Server Failover
Power On/Off Multiple Servers

Component Data - Blade 4
----------------------------------------

Server 4 is not present.

There are no events for Server 4.

No Virtual Drives have been assigned to this server.

Available Actions
Action
Server Failover
Power On/Off Multiple Servers

Component Data - Blade 5
----------------------------------------

Server 5 is not present.

There are no events for Server 5.

No Virtual Drives have been assigned to this server.

Available Actions
Action
Server Failover
Power On/Off Multiple Servers

Component Data - Blade 6
----------------------------------------

Server 6 is not present.

There are no events for Server 6.

No Virtual Drives have been assigned to this server.

Available Actions
Action
Server Failover
Power On/Off Multiple Servers

top

Switch 1
----------------------------------------

Product Data
Property	Value
Status	OK
Product Name	Gigabit Ethernet Switch
Manufacturer	Intel Corporation
Manufacture Date	2009-02-26 12:53:43 AM
Part Number	D70739-405
Serial Number	BZTC90900024
Asset Tag
Up Time	36 days 23:37:38
Product ID	INTEL_SM
HW Version	D70739-405
Boot Version	1.0.0.6
SW Version	1.0.0.27
Base MAC	00:15:17:AA:A8:84

Last 40 non-Closed Events for Switch 1
Id	Date	Severity	Description
502	2011-01-14 17:25:47	Info	Spanning Tree Port State Forwarding: {port}
501	2011-01-14 17:25:45	Info	Spanning Tree Port State Forwarding: {port}
500	2011-01-14 17:25:43	Info	Link Up: Server 1: Port 2 has link and should now be active
498	2011-01-14 17:25:39	Info	Link Up: Server 1: Port 1 has link and should now be active
496	2011-01-14 17:25:06	Info	Link Down: Server 1: Port 2
495	2011-01-14 17:25:03	Info	Link Down: Server 1: Port 1
239	2010-12-26 10:08:37	Info	Spanning Tree Port State Forwarding: {port}
238	2010-12-26 10:08:35	Info	Link Up: External: Port 1 has link and should now be active

Port Table
Port	VLAN ID	Enabled	Link	Set Speed	Cur Speed	Vlan Mode	Span Tree
External: Port 1	1	Yes	Up	Auto	1G-FDX	General	Enabled
External: Port 2	1	Yes	Down	Auto	N/A	General	Enabled
External: Port 3	1	Yes	Down	Auto	N/A	General	Enabled
External: Port 4	1	Yes	Down	Auto	N/A	General	Enabled
External: Port 5	1	Yes	Down	Auto	N/A	General	Enabled
External: Port 6	1	Yes	Down	Auto	N/A	General	Enabled
External: Port 7	1	Yes	Down	Auto	N/A	General	Enabled
External: Port 8	1	Yes	Down	Auto	N/A	General	Enabled
External: Port 9	1	Yes	Down	Auto	N/A	General	Enabled
External: Port 10	1	Yes	Down	Auto	N/A	General	Enabled
Server 1: Port 1	1	Yes	Up	1G-FDX	1G-FDX	General	Enabled
Server 1: Port 2	1	Yes	Up	1G-FDX	1G-FDX	General	Enabled
Server 2: Port 1	1	Yes	Up	1G-FDX	1G-FDX	General	Enabled
Server 2: Port 2	1	Yes	Up	1G-FDX	1G-FDX	General	Enabled
Server 3: Port 1	1	Yes	Up	1G-FDX	1G-FDX	General	Enabled
Server 3: Port 2	1	Yes	Up	1G-FDX	1G-FDX	General	Enabled
Server 4: Port 1	1	Yes	Down	1G-FDX	N/A	General	Enabled
Server 4: Port 2	1	Yes	Down	1G-FDX	N/A	General	Enabled
Server 5: Port 1	1	Yes	Down	1G-FDX	N/A	General	Enabled
Server 5: Port 2	1	Yes	Down	1G-FDX	N/A	General	Enabled
Server 6: Port 1	1	Yes	Down	1G-FDX	N/A	General	Enabled
Server 6: Port 2	1	Yes	Down	1G-FDX	N/A	General	Enabled

Statistics Table
Port ID	Input	Output
External: Port 1	3770983999	37477404
External: Port 2	0	0
External: Port 3	0	0
External: Port 4	0	0
External: Port 5	0	0
External: Port 6	0	0
External: Port 7	0	0
External: Port 8	0	0
External: Port 9	0	0
External: Port 10	0	0
Server 1: Port 1	2327510314	1734919769
Server 1: Port 2	4210	3985455055
Server 2: Port 1	2545324356	1826122274
Server 2: Port 2	1996	3985492057
Server 3: Port 1	3299322725	1493446931
Server 3: Port 2	120125653	493717275
Server 4: Port 1	0	0
Server 4: Port 2	0	0
Server 5: Port 1	0	0
Server 5: Port 2	0	0
Server 6: Port 1	0	0
Server 6: Port 2	0	0

VLAN Table
VLAN	Name	Ports Assigned to this VLAN
1	Default VLAN	External: Port 1 External: Port 2 External: Port 3 External: Port 4 External: Port 5 External: Port 6 External: Port 7 External: Port 8 External: Port 9 External: Port 10 Server 1: Port 1 Server 1: Port 2 Server 2: Port 1 Server 2: Port 2 Server 3: Port 1 Server 3: Port 2 Server 4: Port 1 Server 4: Port 2 Server 5: Port 1 Server 5: Port 2 Server 6: Port 1 Server 6: Port 2

Available Actions
Action
Configure Ports
Reset
Advanced Configuration

Switch 2
----------------------------------------

Switch 2 is not present.

There are no events for Switch 2.

Available Actions
Action
No Actions Available

top

Storage Controller 1
----------------------------------------

Storage Controller Properties
Property	Value
Status	OK (Primary)
Controller	1
Product Name	Server Storage Module
Manufacturer	Intel Corporation
Manufacture Date	2009-03-03 06:13:48 AM
Part Number	D70737-408
Serial Number	PRTW90100198
Asset Tag
Network Address (MAC)	00 15 17 9F 29 BD
Redundancy Check	Enabled
Firmware Version	3.07.0140.06
Software Version	3.07.0140.06
Expander Version	1.03.0140.71

Last 40 non-Closed Events for SCM 1
Id	Date	Severity	Description
113	2010-12-26 08:39:36	Info	Fault Indication: SCM 1 Fault LED Off

Expansion Port To Server Access
Server	Permission
1	NO
2	NO
3	YES
4	NO
5	NO
6	NO

Battery Data
Property	Value
Product Name	SCM Battery
Manufacturer	Intel Corporation
Manufacture Date	2008-10-30 01:05:03 PM
Part Number	G32800011004103
Serial Number	HLX0839O0563000
Asset Tag
ID	1
Current Temperature	37C/98.6F
Cycle Count	7
Voltage	4120mV
Current	0mA (steady state)
Number of Cells	2

Active Background Tasks Status
Active Task	Status
Background Task(s) are not active	N/A

Available Actions
Action
Reset
Expansion Port

Storage Controller 2
----------------------------------------

Storage Controller Properties
Property	Value
Status	OK (Secondary)
Controller	2
Product Name	Server Storage Module
Manufacturer	Intel Corporation
Manufacture Date	2008-05-12 06:25:06 PM
Part Number	D70737-404
Serial Number	PRTW81900030
Asset Tag
Network Address (MAC)	00 15 17 77 99 A0
Redundancy Check	Enabled
Firmware Version	3.07.0140.06
Software Version	3.07.0140.06
Expander Version	1.03.0140.71

Last 40 non-Closed Events for SCM 2
Id	Date	Severity	Description
127	2010-12-26 08:40:07	Info	Storage Controller Operational
120	2010-12-26 08:39:50	Info	Battery capacity is normal
119	2010-12-26 08:39:49	Info	Battery detected
110	2010-12-26 08:38:07	Info	Storage Controller '2' detected

Expansion Port To Server Access
Server	Permission
1	NO
2	NO
3	NO
4	NO
5	NO
6	NO

Battery Data
Property	Value
Product Name	SCM Battery
Manufacturer	Intel Corporation
Manufacture Date	2008-02-27 08:13:10 PM
Part Number	G32800011003712
Serial Number	ETI0808O1079000
Asset Tag
ID	2
Current Temperature	45C/113F
Cycle Count	7
Voltage	4098mV
Current	0mA (steady state)
Number of Cells	2

Active Background Tasks Status
Active Task	Status
Background Task(s) are not active	N/A

Available Actions
Action
Reset
Expansion Port

top

CMM
----------------------------------------

Product Data
Property	Value
Status	OK
Product Name	Chassis Management Module
Manufacturer	Intel Corporation
Manufacture Date	2009-03-03 11:36:22 AM
Part Number	D70735-405
Serial Number	BZBC91000040
Asset Tag
External Network Address (MAC)	00:15:17:AA:BB:43
Internal Network Address (MAC)	00:15:17:AA:BB:42
Boot Firmware Revision	1.41
Software Revision	6.6.100.20101015.23953

Last 40 non-Closed Events for Management Module
Id	Date	Severity	Description
548	2011-01-16 13:05:16	Info	User 'ADMIN' authentication failure from host '192.168.21.24'
349	2010-12-30 06:25:16	Info	Feature Key Trial Ended
348	2010-12-30 06:25:15	Info	Feature Key Trial Ended
1	2010-12-25 13:33:16	Info	All Records Deleted from EventLog

Product Data
Property	Value
Product Name	System Midplane
Manufacturer	Intel Corporation
Manufacture Date	2009-02-25 03:11:04 AM
Part Number	D70484-407
Serial Number	BZMD90800153
Asset Tag

Available Actions
Action
Reset
Prepare for CMM Hardware Upgrade

top

System Fan 1
----------------------------------------

Product Data
Property	Value
Status	OK
Product Name	Fan Control Board
Manufacturer	Intel Corporation
Manufacture Date	2009-03-04 01:53:14 PM
Part Number	D70745-404
Serial Number	BZRW90980971
Asset Tag

There are no events for Upper Rear System Fan.

Sensor Values
Sensor	Value	Units	Min. Expected	Max. Expected
Temperature	27	deg C	0.000000	90.000000
Tachometer #1	2600	RPM	1000.000000	7000.000000
Tachometer #2	2600	RPM	1000.000000	7000.000000

Available Actions
Action
No Actions Available

System Fan 2
----------------------------------------

Product Data
Property	Value
Status	OK
Product Name	Fan Control Board
Manufacturer	Intel Corporation
Manufacture Date	2009-03-03 06:34:14 AM
Part Number	D70745-404
Serial Number	BZRW90981287
Asset Tag

There are no events for Lower Rear System Fan.

Sensor Values
Sensor	Value	Units	Min. Expected	Max. Expected
Temperature	25	deg C	0.000000	80.000000
Tachometer #1	2300	RPM	1000.000000	7000.000000
Tachometer #2	2300	RPM	1000.000000	7000.000000

Available Actions
Action
No Actions Available

IO Fan
----------------------------------------

Product Data
Property	Value
Status	OK
Product Name	Fan Control Board
Manufacturer	Intel Corporation
Manufacture Date	2009-03-03 03:11:06 AM
Part Number	D70745-404
Serial Number	BZRW85180146
Asset Tag

There are no events for Front IO Fan.

Sensor Values
Sensor	Value	Units	Min. Expected	Max. Expected
Temperature	22	deg C	0.000000	70.000000
Tachometer #1	8400	RPM	1000.000000	19000.000000
Tachometer #2	6600	RPM	1000.000000	19000.000000
Tachometer #3	8200	RPM	1000.000000	19000.000000
Tachometer #4	6700	RPM	1000.000000	19000.000000
Tachometer #5	8300	RPM	1000.000000	19000.000000
Tachometer #6	6800	RPM	1000.000000	19000.000000

Available Actions
Action
No Actions Available

top

Power Supply 1
----------------------------------------

Product Data
Property	Value
Status	OK , Powered
Product Name	Power Supply
Manufacturer	Intel Corporation
Manufacture Date	2009-02-16 07:27:26 PM
Part Number	D73299-005
Serial Number	DLD0907000673
Asset Tag

There are no events for Power Supply 1.

Sensor Values
Sensor	Value	Units	Min. Expected	Max. Expected
Output Voltage	12.46	Volts	10.974001	12.927001
Output Amps	16.5	Amps	0.000000	84.000000
Fan-1 Tach.	6000	RPM	2000.000000	19000.000000
Fan-2 Tach.	6000	RPM	2000.000000	19000.000000
Inlet Temp.	32	deg C	0.000000	70.000000

Available Actions
Action
No Actions Available

Power Supply 2
----------------------------------------

Product Data
Property	Value
Status	OK , Powered
Product Name	Power Supply
Manufacturer	Intel Corporation
Manufacture Date	2009-02-16 07:23:00 PM
Part Number	D73299-005
Serial Number	DLD0907000764
Asset Tag

There are no events for Power Supply 2.

Sensor Values
Sensor	Value	Units	Min. Expected	Max. Expected
Output Voltage	12.09	Volts	10.974001	12.927001
Output Amps	15.5	Amps	0.000000	84.000000
Fan-1 Tach.	5900	RPM	2000.000000	19000.000000
Fan-2 Tach.	6000	RPM	2000.000000	19000.000000
Inlet Temp.	33	deg C	0.000000	70.000000

Available Actions
Action
No Actions Available

Power Supply 3
----------------------------------------

Product Data
Property	Value
Status	OK
Product Name	Fan Control Board
Manufacturer	Intel Corporation
Manufacture Date	2009-10-16 08:55:46 PM
Part Number	D70745-404
Serial Number	BZRW94280875
Asset Tag

There are no events for Fan Blank 3.

Sensor Values
Sensor	Value	Units	Min. Expected	Max. Expected
Temperature	31	deg C	0.000000	80.000000
Tachometer #1	3900	RPM	2000.000000	19000.000000
Tachometer #2	4700	RPM	2000.000000	19000.000000
Tachometer #3	3600	RPM	2000.000000	19000.000000
Tachometer #4	4500	RPM	2000.000000	19000.000000

Available Actions
Action
No Actions Available

Power Supply 4
----------------------------------------

Product Data
Property	Value
Status	OK
Product Name	Fan Control Board
Manufacturer	Intel Corporation
Manufacture Date	2009-10-16 06:10:23 PM
Part Number	D70745-404
Serial Number	BZRW94280607
Asset Tag

There are no events for Fan Blank 4.

Sensor Values
Sensor	Value	Units	Min. Expected	Max. Expected
Temperature	26	deg C	0.000000	80.000000
Tachometer #1	3700	RPM	2000.000000	19000.000000
Tachometer #2	4600	RPM	2000.000000	19000.000000
Tachometer #3	3800	RPM	2000.000000	19000.000000
Tachometer #4	4600	RPM	2000.000000	19000.000000

Available Actions
Action
No Actions Available

top

Storage - Layout
----------------------------------------

Drives

Storage Pools

Virtual Drives

Drive #1
—
136.98 GB
Drive #2
—
136.98 GB
Drive #6
(Global Hot Spare)

ESX

271.94 GB

Virtual Drive	Affinity	Mapped Servers
Server1 —45.00 GB RAID1	SCM 1	Server 1 Drive 0
Server2 —45.00 GB RAID1	SCM 1	Server 2 Drive 0
Server3 —45.00 GB RAID1	SCM 1	Server 3 Drive 0

Drive #3
—
136.98 GB
Drive #4
—
136.98 GB
Drive #5
—
136.98 GB
Drive #6
(Global Hot Spare)

VMs

407.91 GB

Virtual Drive	Affinity	Mapped Servers
Daten —100.00 GB RAID5	SCM 2	Server 1 Drive 1 Server 2 Drive 1 Server 3 Drive 1

Drive #6
—
136.98 GB

GLOBAL HOT SPARES

Drive #7
Drive #8
Drive #9
Drive #10
Drive #11
Drive #12
Drive #13
Drive #14

NOT PRESENT

top

Storage - Physical Drives
----------------------------------------

Slot	Manufacturer	Model	SerialNumber	Firmware Revision	Size (GB)	Configurable Size (GB)	Spare
1	Fujitsu	MBB2147RC	BS00P91029YB	0105	136.98	135.97
2	Fujitsu	MBB2147RC	BS00P8C024KP	0105	136.98	135.97
3	Fujitsu	MBB2147RC	BS00P8A020VE	0105	136.98	135.97
4	Fujitsu	MBB2147RC	BS00P8C024KJ	0105	136.98	135.97
5	Fujitsu	MBB2147RC	BS00P8A01YA2	0105	136.98	135.97
6	Fujitsu	MBD2147RC	D0A0PA201SMH	0102	136.98	135.97	1

top

Storage - Virtual Drives
----------------------------------------

Name	Size (GB)	Raid Level	Mapping
Server1	45.00	RAID1	Server 1 Drive 0
Server2	45.00	RAID1	Server 2 Drive 0
Server3	45.00	RAID1	Server 3 Drive 0
Daten	100.00	RAID5	Server 1 Drive 1

top

Storage - Pools
----------------------------------------

Name	Size (GB)	Unused Size (GB)	# Physical Drives	# Logical Drives
ESX	271.94	1.94	2	3
VMs	407.91	257.91	3	1

top

IP Configuration

CMM External IP Configuration

IP Configuration

Specify the IP settings used to communicate with the CMM from your network.

Saving changes on this page requres a CMM reset which may take several minutes.

Host Name: cbcmm

MAC Address: 00:15:17:AA:BB:43

Method: Static-Address

IP Address: 10.10.10.175

Netmask: 255.255.255.0

Gateway: 10.10.10.1

DNS 1:

DNS 2:

CMM Internal IP Configuration

IP Configuration

This subnet is used by the management module to communicate with chassis components such as servers, switches, and storage modules. Do not connect the CMM's external network interface to the same subnet.

MAC Address: 00:15:17:AA:BB:42

Netmask: 255.255.255.0

Subnet IP (XX.XX.XX): 1.1.1

top

Notification

Mail

Optionally specify an SMTP email server address and email sender (from) address for distribution of event notifications.

SMTP Mail Server Address:

Mail Sender Address:

Sys Log

SysLog

Optionally specifiy a syslog server configuration to enable logging of system events to an external server. The server must support syslogd or syslog-ng logging over UDP or TCP. Specify the address, protocol and port number.

Syslog Server Address:

SysLog server port number: 514

Protocol used by the Syslog Server: UDP

Message Format: {description} - {component}; Policy {policy}; {detailed} {action}

System Message Facility: local0

Application Message Facility: local0

Switch Message Facility: local0

Storage Message Facility: local0

Chassis Message Facility: local0

top

SNMP

Agent

SNMPv2 Support: enabled

Public Community: public

Sys Location: Office

Admin Contact: Admin

Sys Description: Intel Modular Server System

SNMP Trap Destination

SNMP Settings

Optionally forward SNMP traps for specific communities to external agents.

E.g. IP: 10.0.0.1:111, Community: public

Community string may not contain spaces or special characters other than dashes ("-") and underscores ("_").

SNMP 1- IP:

Community:

SNMP 2- IP:

Community:

SNMP 3- IP:

Community:

SNMP 4- IP:

Community:

top

Time

top

DIAGNOSTIC INFORMATION

Drive #1

136.98 GB

Drive #2

136.98 GB

Drive #6

Server1

—45.00 GB

Server2

—45.00 GB

Server3

—45.00 GB

Drive #3

136.98 GB

Drive #4

136.98 GB

Drive #5

136.98 GB

Drive #6

Daten

—100.00 GB

Drive #6

136.98 GB

Drive #7

Drive #8

Drive #9

Drive #10

Drive #11

Drive #12

Drive #13

Drive #14

IP Configuration

IP Configuration

IP Configuration

Notification

Mail

SysLog

SNMP

SNMP Settings

Time

CMM Date/Time