technical
data

2U Intel Dual-CPU SR2500 VMware Server

Close
Print preview
1
PRODUCT KEY-FEATURES


  • Optimal performance due to the latest Intel Xeon-processor-technology. Dual- or Quad-Core processors possible
  • High-quality memory modules of well-known manufacturers. Up to 32GB, based on FB-DIMM technology possible 
  • High storage capacity due to SAS/SATA server hard disks, currently up to 6TB possible. Easy exchange of the server hard disks due to Hot-Swap-technology
  • High flexibility due to 3 Full-Profile and 2 Low-Profile extension slots
  • Saving of costs and time due to hardware monitoring via Remote-Management-cards
  • High reliability thanks to redundant Hot-Swap power supplies
  • Low cost price due to hardware-supported virtualization (VT technology)
2
PRODUCT SPECIFICATION

CPU » max. 2x Xeon Quad-Core
» max. FSB 1333
» max. L2 8192KB
RAM » only Registered Memory
» ECC Function
» Max. 32768 MB
» Dual Channel Memory Bus
» DDR2- Fully Buffered DIMM 533/667 MHz
Mainboard » Intel® Server Board S5000PAL
Hard disks » SAS/SATA
» max. number 6
» Hot-Swap
Backplane 5+1 Backplane
Chipset Intel® 5000P (Blackford)
Servermanagement Intel Server Management Software v10.x
Slots » 5 extension slots:
Full Profile 2xPCI-Express and 1xPCI-X plus Low Profile 2xPCI-Express
or
Full Profile 3xPCI-X plus Low Profile 2xPCI-Express
LAN onboard » 2x Gigabit LAN onboard
External ports » 2 VGA (1x Front, 1x Back)
» 1 serial interface (asynchronous RS-232C)
8-pin RJ45 port mit einem 10-pin internal header)
» 1 P/S Maus
» 1 P/S keyboard
» 3x USB interfaces (1xFront, 2x Back)
Fans » 2x 80mm + 1x 60mm
» optionally: 4x 80mm + 2x 60mm redundant
» Fans monitoring
Dimensions 2U x 430 x 672 mm (HxWxD)
Weight 15 kg (Standard configuration)
Volume 60 dBA (in 1.0 m distance, idling)
70 dBA (in 1.0 m distance, booting/full load)

3
PRODUCT DETAILS


Processor

Description Tact Cores Cache Architecture FSB TDP Features
Intel Quad Core Xeon E5405 2 GHz 4 12 MB 45 nm 1333 MHz 80 W Intel EM64T, Intel I/OAT, Intel VT
Intel Quad Core Xeon E5420 2.5 GHz 4 12 MB 45 nm 1333 MHz 80 W Intel EM64T, Intel I/OAT, Intel VT
Intel Quad Core Xeon X5460 3.16 GHz 4 12 MB 45 nm 1333 MHz 120 W Intel EM64T, Intel I/OAT, Intel VT

Main memory

Description Memory type Operating Voltage Latency period
2048 MB DDR2 667-RAM (1x 2048 MB) ATP FB - Dimm FB-DIMM 667 1.8 V 3 ns
1024 MB DDR2 667-RAM (1x 1024 MB) ATP FB - Dimm FB-DIMM 667 1.8 V 3 ns
4096 MB DDR2 667-RAM (1x 4096 MB) ATP FB - Dimm FB-DIMM 667 1.8 V 3 ns

Backplanes

Th advantage of a Backplane: Quick exchange of hard disks

When using a Backplane, the hard disks are not connected to the system by cables as customary,
but are connected via plug connections. Due to this reason, hard disks can be exchanged without the need of opening the server chassis. This is particularly suitable for systems where hard disks have to be exchanged in short intervals, e.g. for backups.

Hints for the assembly of Backplanes
At all Thomas-Krenn Server, belatedly needed hard disks can be easily and quickly retrofitted.
At servers where the backplane connectors are difficult to access, all cables (connection between Backplane and controller) will be mounted by us. At servers where the Backplane connectors are easily to access, the Backplane cables are attached to the consignment. 

Please make use of the "remarks"-field during the orderin process to let us know how many hard disks shall be connected to an available Onboard controller.

Hot-Swap operation (requires additionally a RAID controller)
With Hot-Swap hard disks can be exchanged while the server is operating. So the Downtime of your server minimises considerably .

Selection of the matching Backplane
Interface
Which Backplane matches?
Particularities
Serial ATA
(SATA)
The connection is enabled by 4-pole connectors. There is a seperate connection for power supply.
- LED for access on and status of the hard disks is supported*
Serial Attached SCSI
(SAS)
The connection is enabled by 7-pole connectors. There is a seperate connection for power supply.
- LED for access on and status of the hard disks is supported
SCA
The hard disks are connected to the Backplane via a 80-pole connector.
- The scheduling of the hard disks is executed by the Backplane. An external terminator is not required.
* With a SATA RAID controller (e.g. from 3Ware), and the corresponding management software, the SATA hard disks can be managed.

Hard disks SAS

Description Capacity Interface Form factor Performance Revolutions per minute Cache Latency period
36 GB SAS Fujitsu 15000 rpm 36 GB SAS 3,5 " 3 Gb/s 15000 rpm 16 MB 2 ms
74 GB SAS Fujitsu 15000 rpm 74 GB SAS 3,5 " 3 Gb/s 15000 rpm 16 MB 2 ms
147 GB SAS Fujitsu 15000 rpm 147 GB SAS 3,5 " 3 Gb/s 15000 rpm 16 MB 2 ms
300 GB SAS Fujitsu 15000 rpm 300 GB SAS 3,5 " 3 Gb/s 15000 rpm   2 ms

Risercard FP

In this server, max. five cards (3x FP, 2x LP) can be assembled.
By using various riser cards, the following constellations are possible:

Variant 1: with riser card FP 2xPCI-Express and 1xPCI-X plus riser card LP 2xPCI-Express
                

SAS RAID Controller

Description Ports internal Cache Raid-level Bus Interface Height BBU support
Adaptec ASR5405 4x SAS (0,1,1E,5,5EE,6,10,50,60) 4 256 MB 0, 1, 10, 1E, 5, 50, 6, 60, JBOD, Single Disk PCI-E 8x SAS, SATA LP, FP ja
Adaptec ASR5805 8x SAS (0,1,1E,5,5EE,6,10,50,60) 8 512 MB 0, 1, 10, 1E, 5, 50, 6, 60, JBOD, Single Disk PCI-E 8x SAS, SATA LP, FP ja

Add-on card 3

Description Ports Bus Category Medium Height
Intel PRO/1000 PT Single Port server network card 1 PCI-E 1x 1 GBit Kupfer LP, FP
Intel PRO/1000 PT Dual Port Server network card 2 PCI-E 4x 1 GBit Kupfer LP, FP
Intel PRO/1000 PT Quad Port Server network card 4 PCI-E 4x 1 GBit Kupfer LP, FP

Description Ports internal Bus Interface Height
Qlogic QLE2460 Single Port Fibre Channel HBA 1 PCI-E 4x Fibre LP, FP
Qlogic QLE2462 Dual Port Fibre Channel HBA 2 PCI-E 4x Fibre LP, FP

Add-on card 4

Description Ports Bus Category Medium Height
Intel PRO/1000 PT Single Port server network card 1 PCI-E 1x 1 GBit Kupfer LP, FP
Intel PRO/1000 PT Dual Port Server network card 2 PCI-E 4x 1 GBit Kupfer LP, FP
Intel PRO/1000 PT Quad Port Server network card 4 PCI-E 4x 1 GBit Kupfer LP, FP

Description Ports internal Bus Interface Height
Qlogic QLE2460 Single Port Fibre Channel HBA 1 PCI-E 4x Fibre LP, FP
Qlogic QLE2462 Dual Port Fibre Channel HBA 2 PCI-E 4x Fibre LP, FP

Add-on card 5

Description Ports external Bus Interface Height
Qlogic QLA4052 I-SCSI HBA 2 PCI-X 64Bit 133MHz iSCSI LP, FP

Remote Management

Description Key features
Intel Management Module 2 for SR2500 IPMI with KVM Over LAN, Serial Over LAN (SOL), Virtual Media Over LAN (Virtual USB Floppy/CD and Drive Redirection), Event Log, OS Independent, Hardware Health Monitor, Remote Power Control

With Peppercon`s eRIC X you are able to telecommand your server in every operating status (Boot moment, BIOS, Blue Screens). You are able to turn it on and off from afar. So you can lower TCO. 

  

Mounting articles

Description Distance between assembly flanges Total length server front to end of assembly rail Max. extraction length
Extractable assembly rails SR14xx/24xx/25xx 620-750 mm 900 mm 750 mm

  1U SC811
 SR14xx/SR24xx/
SR25xx/RM217		 SC53xx 2-4 U SMCI-5015 Lower shelf
Distance between assembly flanges (A) 630-780 mm 340-730
 620-750 650-750 500-820 650-850 660-900
Total length server front to end of assembly rail (B) 630 630
 900 800 700 690 -
Maximal extraction length
out of server cabinet (C)		 650 500
 750 750 650 370 - 695
695 mm only with an adapter (contained in the accessory)		 -

All information in mm.
If the standard assembly rails do not match into your rack cabinet,
please contact us. We are looking forward to help you.

Service & Support

Service-Leistung Business Premium
Laufzeit des Service & Support Vertrages in Monaten 24 36
Vor-Ort-Service (Next Business Day)
Die Servicepreise richten sich nach dem Standort des Servers
(Deutschland, Österreich oder Polen), bei Standortveränderung
ist der Kunde verpflichtet, dies der Thomas-Krenn.AG mitzuteilen.		  
Pickup & Return Service
Technischer Support (E-Mail)
Treiber-Support
Zugriff auf my.thomas-krenn.com
Knowledgebase
Online Schulungen
Express-Vorabaustausch
30 Tage Installations-Support
Telefonischer Technischer Support (9 bis 17 Uhr)
Telefonischer Technischer Support (6 bis 22.30 Uhr)  
Zugriff auf Linux Expert-Center  
Zugriff auf Microsoft Expert-Center  
Weitere Informationen zu unserem Service & Support finden Sie unter my.thomas-krenn.com

 Druckversion als pdf-Datei [300 kB]

VI Foundation Package + Support

  • ESX 3.5
  • VMFS
  • Virtual SMP
  • Virtual Center Agent
  • Update Manager
  • Consolidated Backup

 

VI Standard Package + Support

  • ESX 3.5
  • VMFS
  • Virtual SMP
  • Virtual Center Agent
  • Update Manager
  • Consolidated Backup
    additionally contained:
  • High Availability

 

VI Enterprise Package + Support

  • ESX 3.5
  • VMFS
  • Virtual SMP
  • Virtual Center Agent
  • Update Manager
  • Consolidated Backup
  • High Availability
    additionally contained:
  • DRS/DPM
  • VMotion™
  • Storage VMotion

 

Spare parts

Description Capacity Interface Form factor Performance Revolutions per minute Cache Latency period
36 GB SAS Fujitsu 15000 rpm 36 GB SAS 3,5 " 3 Gb/s 15000 rpm 16 MB 2 ms
74 GB SAS Fujitsu 15000 rpm 74 GB SAS 3,5 " 3 Gb/s 15000 rpm 16 MB 2 ms
147 GB SAS Fujitsu 15000 rpm 147 GB SAS 3,5 " 3 Gb/s 15000 rpm 16 MB 2 ms
300 GB SAS Fujitsu 15000 rpm 300 GB SAS 3,5 " 3 Gb/s 15000 rpm   2 ms


© 2002-2008 Thomas-Krenn.AG
EU: +49 8551 9150-0
AUT: +43 7282 20797-3600
CH: +41 848-207970
 
Speltenbach-Steinäcker 1
94078 Freyung - Germany
info@thomas-krenn.com