Thomas-Krenn.AG [2U Intel Single-CPU SC823 Server ] Server distribution - Server, 1U server, 2U server, Rack server, server chassis

technical
data

2U Intel Single-CPU SC823 Server

PRODUCT KEY-FEATURES

		Optimal performance due to the latest Intel Core 2 Duo technology High-quality memory modules of well-known manufacturers. Up to 8GB, based on DDR2-technology possible High storage capacity due to SAS/SATA server hard disks, currently up to 4.5TB possible. Easy exchange of the server hard disks due to Hot-Swap-technology High flexibility due to 6 Low-Profile extension slots Saving of costs and time due to hardware monitoring via Remote-Management-cards High reliability thanks to redundant Hot-Swap power supplies (optionally)

PRODUCT SPECIFICATION

CPU	» Intel® Xeon® 3000 Sequence and Core™ 2 Quad / Duo Series in LGA775 » FSB 1333/1066/800 MHz » L2 2048 KB
RAM	max. 8GB unbuffered ECC / non-ECC DDR2 800/667 SDRAM
Mainboard	» Supermicro X7SBE » Intel® 3210 + ICH9R Chipset » no IDE Controller onboard » 6x SATA (3 Gbps) onboard (RAID 0,1,5,10 only Windows)
Hard disks	» SATA/SAS » max. number 6 » Hot-Swap
Backplane	6x Backplane ( 6x Backplanes SATA)
Chipset	Intel® 3210 + ICH9R Chipset
Free slots	» 1 (x4) PCI-Express, 1 (x8) PCI-Express » 2x 64-bit 133MHz PCI-X » 1x 64-bit 100MHz PCI-X
LAN	» 2x RJ45 LAN ports » 2x Single-port Gigabit PCI-Express Ethernet Controllers » Intel® 82573V + Intel® 82573L » Supports 10BASE-T, 100BASE-T, 1000BASE-T, RJ45 output » IPMI 2.0 (with 3rd LAN optionally)
On-Board Peripherals	» 1x VGA On-board ATI ES1000 (32MB) graphics » 1x Fast UART 16550 serial port » Six Serial ATA ports (3 Gbps performance) » 1 Floppy controller; 1.44 MB » PS/2 mouse and keyboard » Up to 7x USB 2.0 / 1.1 compliant ports, 2 rear ports, 2 internal heades for 4 USB 2.0/1.1 ports + 1 on-board
Servermanagement	» Super Doctor III » web-based tool (independent from time and place) » no additional hardware required » allows monitoring of critical system statuses (CPU temperature, system voltage, fans status etc.) » cost-saving solution » automatic e-mail notification » supports SNMP
SATA RAID onboard	» 6 Ports; RAID 0, 1, 5, 10 support (Windows Only) Thomas-Krenn technicians recommend the use of an external RAID controller for best performance and stability.
Fans	4x 80x80x20mm
Dimensions	2Ux426x650 mm (HxWxD)
Weight	24 kg (standard configuration)
Volume	68 dBA (full load) 62 dBA (idling)

PRODUCT DETAILS

Basis

Description	Form factor	U	Height	Width	Depth	HDD Slots	Backplane type	USB-Ports (front)	USB-Ports (rear)	Power supply Single	Power supply redundant	Extension-slots (LP)	Fans Hotswap	Fans Non-Hotswap	Silent-Lüfterkit Option	Airshroud	(Empty)weight	Assembly rails	Distance between assembly flanges	Total length server front to end of assembly rail	Max. extraction length
2U Supermicro Chassis SC823TQ	19' Rack	2 U	89 mm (H)	426 mm (W)	650 mm (D)	6 x HDDs	SATA/SAS Backplane	0 x USB (front)	2 x USB (rear)	500 Watt	2x 500 Watt	7 x Low Profile	4x 80mm 6300 RPM fans	-	nein	ja	24 kg	im Lieferumfang enthalten	470-870 mm	750 mm	720 mm

Description	Chipset	CPU	Socket	max. RAM	RAM-type	Banks	System Bus	Extension-slot PCI-E (x4)	Extension-slot PCI-E (x8)	Extension-slot PCI-X 64-Bit 100MHz	Extension-slot PCI-X 64-Bit 133MHz	Form factor	Onboard SATA Ports	Onboard SATA Chipset	Onboard SATA RAID	NIC-Ports	NIC-Chipset	Onboard peripherals	USB-Ports (rear)	USB headers	USB on board	IPMI Support	Remote management	Management software
Supermicro Mainboard X7SBE	Intel 3210 (Bigby-P)	Celeron S, Intel Xeon 3xxx	LGA-775 (Single CPU)	8 GB	DDR2-667 ECC	4 DIMMs	800 MHz, 1066 MHz, 1333 MHz	1 x PCI-E (x4)	1 x PCI-E (x8)	2 x PCI-X 64-Bit 100MHz	2 x PCI-X 64-Bit 133MHz	ATX	6 x SATA	Intel ICH9R	Intel Codeset (RAID 0, 1, 5, 10 Windows), Adaptec Codeset (RAID RAID 0, 1, 10 Linux)	2 x RJ45	Intel 82573V, Intel 82573L	1x Floppy-Controller, 1x VGA (ATI ES1000, 32MB), PS2 Keyboard und Mouse-Port, 1x Fast UART 16550 serial port, 1x internal serial header	2 x USB (rear)	2 x USB headers	1 x USB on Board	ja	Supermicro IPMI 2.0;Dedizierte NIC;KVM over LAN;Virtual-Media over LAN	Supermicro SuperDoctor

Processor

Description	Tact	Cores	Cache	Socket	Architecture	FSB	TDP	Features
Intel Celeron S 430 1.8 GHz	1.8 GHz	1	512 kB	LGA-775 (Single CPU)	65 nm	800 MHz	35 W	Intel EM64T
Intel Xeon Dual Core E3110 3.00GHz 6MB FSB1333	3 GHz	2	6 MB	LGA-775 (Single CPU)	45 nm	1333 MHz	65 W	Intel EM64T, Intel I/OAT, Intel VT
Intel Xeon Quad Core 3320 2.50 GHz 6MB FSB1333	2.5 GHz	4	6 MB	LGA-775 (Single CPU)	45 nm	1333 MHz	95 W	Intel EM64T, Intel I/OAT, Intel VT
Intel Xeon Quad Core 3350 2.66GHz 12MB FSB1333	2.66 GHz	4	12 MB	LGA-775 (Single CPU)	45 nm	1333 MHz	95 W	Intel EM64T, Intel I/OAT, Intel VT
Intel Xeon Quad Core 3360 2.83GHz 12MB FSB1333	2.83 GHz	4	12 MB	LGA-775 (Single CPU)	45 nm	1333 MHz	95 W	Intel EM64T, Intel I/OAT, Intel VT

Main memory

Description	Memory size	Memory type	Operating Voltage	Latency period
512 MB ECC DDR2 667-RAM (1x 512 MB) ATP	512 MB	DDR2-667 ECC	1.8 V	3 ns
1024 MB ECC DDR2 667-RAM (1x 1024 MB) ATP	1 GB	DDR2-667 ECC	1.8 V	3 ns
2048 MB ECC DDR2 667-RAM (1x 2048 MB) ATP	2 GB	DDR2-667 ECC	1.8 V	3 ns

Hard disks SAS

Description	Capacity	Interface	Form factor	Performance	Revolutions per minute	Cache	Latency period	MTBF
36 GB SAS Fujitsu 15000 rpm	36 GB	SAS	3,5 "	3 Gb/s	15000 rpm	16 MB	2 ms	1.2 Mio h
74 GB SAS Fujitsu 15000 rpm	74 GB	SAS	3,5 "	3 Gb/s	15000 rpm	16 MB	2 ms	1.4 Mio h
147 GB SAS Fujitsu 15000 rpm	147 GB	SAS	3,5 "	3 Gb/s	15000 rpm	16 MB	2 ms	1.4 Mio h
300 GB SAS Fujitsu 15000 rpm	300 GB	SAS	3,5 "	3 Gb/s	15000 rpm	16 MB	2 ms	1.4 Mio h

Hard disks SATA

Description	Capacity	Interface	Form factor	Performance	Revolutions per minute	Cache	Latency period	MTBF	Features
160 GB SATA II WD Raid Edition II	160 GB	SATA	3,5 "	3 Gb/s	7200 rpm	16 MB	4.2 ms	1.2 Mio h	TLER, RAFF, NCQ
320 GB SATA II WD Raid Edition III	320 GB	SATA	3,5 "	3 Gb/s	7200 rpm	16 MB	4.2 ms	1.2 Mio h	TLER, RAFF, PMR
500 GB SATA II Seagate Barracuda ES II	500 GB	SATA	3,5 "	3 Gb/s	7200 rpm	32 MB	4.16 ms	1.2 Mio h
750 GB SATA II WD Raid Edition III	750 GB	SATA	3,5 "	3 Gb/s	7200 rpm	32 MB	4.2 ms		TLER, RAFF, PMR
1000 GB SATA II WD Raid Edition III	1 TB	SATA	3,5 "	3 Gb/s	7200 rpm	32 MB	4.2 ms	1.2 Mio h	TLER, RAFF, PMR

SATA Raid Controller

Description	Ports internal	Cache	Raid-level	Bus	Interface	Height	BBU support
3Ware 9650 2x SATA (0,1)	2	128 MB	0, 1, JBOD, Single Disk	PCI-E 1x	SATA2	LP, FP	nein
3Ware 9650 4x SATA (0,1,10,5)	4	256 MB	0, 1, 10, 5, JBOD, Single Disk	PCI-E 4x	SATA	LP, FP	ja
3Ware 9650 8x SATA (0,1,5,6,10,50)	8	256 MB	0, 1, 10, 5, 50, 6, JBOD, Single Disk	PCI-E 4x	SATA	LP, FP	ja

SAS/SATA Raid Controller

Description	Ports internal	Ports external	Cache	Raid-level	Bus	Interface	Height	BBU support
3Ware 9690 8x SAS (0,1,10,5,50,6)	8	0	512 MB	0, 1, 5, 50, 6, JBOD, Single Disk	PCI-E 8x	SAS, SATA2	LP, FP	ja
Adaptec ASR5805 8x SAS (0,1,1E,5,5EE,6,10,50,60)	8	0	512 MB	0, 1, 10, 1E, 5, 50, 6, 60, JBOD, Single Disk	PCI-E 8x	SAS, SATA	LP, FP	ja

Configuration

Vorinstalliertes Test-Raid:
Für die einwandfreie Funktionalität Ihres Serversystems wird eine spezielle Thomas-Krenn Raidkonfiguration erstellt.
Es wird angeraten, dass das Raid nach der Lieferung neu erstellt und initialisiert wird!

Ihr Individuelles Raid:
Bitte geben Sie auf der Zusammenfassungsseite unter „Konfigurationswünsche“ Ihre individuellen Raidwünsche ein (Beispiel: HDD1-3 RAID 5 / HDD4 Hotspare). Bitte teilen Sie uns auch mit, ob das Raid nur erstellt oder auch initialisiert werden soll, da die Initialisierung bis zu 3 Tage dauern kann und die Lieferung des Servers verzögert.

Add-on card 2

Description	Ports	Bus	Category	Medium	Height
Intel PRO/1000 PT Single Port server network card	1	PCI-E 1x	1 GBit	Kupfer	LP, FP
Intel PRO/1000 PT Dual Port Server network card	2	PCI-E 4x	1 GBit	Kupfer	LP, FP
Intel PRO/1000 PT Quad Port Server network card	4	PCI-E 4x	1 GBit	Kupfer	LP, FP

Description	Ports internal	Bus	Interface	Height
Qlogic QLE2460 Single Port Fibre Channel HBA	1	PCI-E 4x	Fibre	LP, FP
Qlogic QLE2462 Dual Port Fibre Channel HBA	2	PCI-E 4x	Fibre	LP, FP

Add-on card 3

Description	Ports	Bus	Category	Medium	Height
Intel PRO/1000 MT Dual Port Server network card	2	PCI-X 64Bit 133MHz	1 GBit	Kupfer	LP, FP

Description	Ports internal	Ports external	Channels	Bus	Interface	Height
Adaptec ASC-29320 SCSI Controller	1	1	1	PCI-X 64Bit 133MHz	SCSI	LP, FP

Add-on card 4

Description	Ports	Bus	Category	Medium	Height
Intel PRO/1000 MT Dual Port Server network card	2	PCI-X 64Bit 133MHz	1 GBit	Kupfer	LP, FP

Description	Ports internal	Ports external	Channels	Bus	Interface	Height
Adaptec ASC-29320 SCSI Controller	1	1	1	PCI-X 64Bit 133MHz	SCSI	LP, FP

External drive

Description	Interface	Transfer rate (native/comp.)	MTBF	Power (operating)
Tandberg RDX USB drive external	USB	25-45 MB/s	500000 h	6.6 W

Backup

Description	Interface	Transfer rate (native/comp.)	MTBF	Power (operating)
Tandberg RDX Kit internal with 160 GB Cartridge (removable hard disk)	SATA 1	25-45 MB/s	500000 h	7.5 W
Tandberg RDX Kit internal with 320 GB Cartridge (removable hard disk)	SATA 1	150 MB/s	500000 h	7.5 W
Tandberg RDX Kit internal with 500 GB Cartridge (removable hard disk)	SATA 1	150 MB/s	500000 h	7.5 W

Power supply unit

Ausfallsicher:
Vorbereitet für redundantes Netzteil

Bisher konnte man sich nur zwischen redundantem oder Single-Netzteil entscheiden. Ein nachträgliches Aufrüsten war nur durch einen erheblichen Kostenaufwand möglich. Der SC823 ist von Anfang an für ein redundantes Netzteil vorbereitet. Damit ist ein Upgrade kostengünstig und sehr schnell durchführbar.

Service & Support

Service Leistung	Basic	PEA	24/7 NBD	24/7 SBD	24/7/4
Maximale Laufzeit in Monaten	12	60	60	60	60
Vor-Ort-Service 7 Tage pro Woche innerhalb von 4 Std
Montag bis Freitag Vor-Ort-Service am selben Arbeitstag
Montag bis Freitag Vor-Ort-Service am nächsten Arbeitstag
Montag bis Freitag Serverrückholung und -bringservice
Technischer Support via E-Mail mit direktem Ansprechpartner
Treiber-Support für Ihren Server
Zugriff auf unseren OnlineServiceCenter
Zugriff auf unsere Knowledgebase
Express-Vorab-Austausch defekter Hardeware
30 Tage Installations-Support
Telefonischer technischer Support von 6.00 bis 22.30 Uhr
Telefonischer technischer Support - 24 Stunden

Choose your service package

The service packages at a glance

Service	Basic	Premium	24/7 NBD	24/7 SBD	24/7/4
Max. duration of the Service & Support contract in months	12	60	60	60	60
On-site service (Same Business Day - the service technician will be on-site within four hours)
On-site service (Same Business Day)
On-site service (Next Business Day)
Pickup & Return service
Technical support (E-Mail)
Drivers-support
Access on my.thomas-krenn.com
Knowledgebase
Express-pre-exchange
30 days installation support
Technical support via phone (9 am to 5 pm)
Technical support via phone (6 am to 10.30 pm)

EU: +49 8551 9150-0
AUT: +43 7282 20797-3600
CH: +41 848-207970

Speltenbach-Steinäcker 1
94078 Freyung - Germany
info@thomas-krenn.com