Supermicro X8DTT-F Motherboard

From Thomas-Krenn-Wiki
Jump to: navigation, search

In this article you will find detailed information about the Supermicro X8DTT-F Motherboard. The motherboard was sold off and is no longer available at Thomas-Krenn.

Motherboard Data

Supermicro X8DTT-F Motherboard

Features

  • Motherboard form factor: 16.64" x 6.5 " (42.26cm x 16.51cm)
  • CPU socket: LGA 1366
  • RAM:
    • Number of DIMM slots: 12
    • Memory type: 1333 / 1066 / 800MHz ECC Registered / ECC or Non ECC Unbuffered DDR3 SDRAM, 72-bit, 240-pin DIMMs
    • Possible sizes of Memory Modules: 1GB, 2GB, 4GB , 8GB , 16GB
    • Maximum Memory Capacity: 192 GB (ECC Registered memory) oder 48 GB (ECC / Non ECC Unbuffered memory)
  • SATA chip: Intel ICH10R
    • 6x SATA Ports
    • The motherboard supports the following RAID´s: 0, 1, 10 and 5 (RAID 5 only with Windows)
  • LAN-Chip: Intel 82576
  • Expansion slots:
    • 1x PCI-E x16
  • Internal I/O ports:
    • 6x SATA 2.0 Ports
    • 4x USB 2.0 (2x Rear / 2x Front Headers)
  • External I/O ports:
    • dedicated IPMI 2.0
    • 1x COM Port
    • 1x VGA
    • 2x LAN Ports
  • Graphics chip: Matrox G200eW
    • Graphic interfaces:
      • 1x VGA
  • IPMI chip: Nuvoton WPCM450R IPMI Chip with AMI-Software

BIOS

BIOS Versions

Recommendation: After a BIOS update load the default settings of the BIOS, and adjust the configuration as suggested below at BIOS Configuration.

  • Version 2.0c
    • The quality assurance update version release date: 3/18/11.

BIOS Settings

At Thomas Krenn, after loading the default settings the following BIOS configuration adjustments are applied before a server with this motherboard gets its test installation and gets shipped:

Advanced          > Boot Feature                    > Quiet Boot                    > Disable
                  > PCIe/PCI/PnP Configuration      > Load Onboard LAN1 Option ROM  > Enabled
                                                    > Load Onboard LAN2 Option ROM  > Enabled

Optionally the configuration of the Settings of the SATA Raids follows depending on the server configuration.

Boot              > Set Boot Priority               > Floppy
                                                    > CD/DVD
                                                    > Festplatte
                                                    > Netzwerk

IPMI

IPMI Versions

  • Version 1.38
    • The quality assurance update version release date: 9/7/10.

Software Tools

Servers with Supermicro X8DTT-F

The following servers have been sold off and are no longer available at Thomas-Krenn:

  

Related articles

Intel DH67GD Desktop Motherboard
Intel S5000PAL and S5000PALR Motherboards
Supermicro X9DBL-iF Motherboard