Supermicro X7SPE-HF-D525 Motherboard

From Thomas-Krenn-Wiki
Jump to navigation Jump to search

This article will provide details on the Supermicro X7SPE-HF-D525 Motherboard.

Motherboard Data

Supermicro X7SPE-HF-D525 Motherboard

Features

  • Motherboard form factor: FlexATX (19.05cm x 17.15cm)
  • CPU socket: Micro-FCBGA - Intel® Atom™ D525 (Pineview-D / DMI / Dual Core, 1.8GHz, 13W)
  • RAM:
    • Number of DIMM slots: 2
    • Memory type: DDR3 800MHz unbuffered, non-ECC, 204-Pin SO-DIMM
    • Possible sizes of Memory Modules: 256 MB, 512 MB, 1 GiB, 2GiB
    • Maximum Memory Capacity: 4 GiB (unbuffered, non-ECC DDR3 800MHz SO-DIMM (Single Channel))
  • SATA chip: Intel ICH9R SATA 3.0Gbps Controller
  • Intel or Adaptec RAID stack supported
  • RAID 0, 1, 5, 10 (Windows)
  • 6x SATA (3.0Gbps) Ports
  • Expansion slots:
    • 1 (x4) PCI-E Slot (in x16 Slot)
  • Graphics chip: Matrox G200eW

Hardware Revisions

  • Version 1.00

BIOS

BIOS Versions

Recommendation: After a BIOS update load the default settings of the BIOS, and adjust the configuration as suggested below at BIOS Configuration.

  • Version 1.2
  • Version 1.1b
    • Signed off for general usage by our QA department: 08.11.2011.
  • Version 1.1a
    • Signed off for general usage by our QA department: 01.07.2011.

BIOS Settings

At Thomas Krenn, after loading the default settings the following BIOS configuration adjustments are applied before a server with this motherboard gets its test installation and gets shipped:

Menu item Advanced

Advanced    > Boot Feature                  > Quick Boot                       > Disabled
                                            > Quiet Boot                       > Disabled
            > PCI/PnP Configuration         > Load Onboard LAN 1 Option ROM    > PXE
                                            > Load Onboard LAN 2 Option ROM    > PXE
            > Hardware Health Configuration > Fan Speed Control Modes          > Balanced/BL

Depending on the server configuration, the following boot options will be configured:

Menu item Boot

Boot        > Boot Device Priority       > Floppy
                                         > CD/DVD
                                         > Festplatte
                                         > Netzwerk

IPMI

IPMI Versions

IPMI has no dedicated NIC, it is only accessible via LAN port 1 (shared with LAN1).

  • Version 2.66
    • Signed off for general usage by our QA department: 11.05.2012.
  • Version 2.58
    • Signed off for general usage by our QA department: 27.10.2011.
  • Version 2.27
    • Signed off for general usage by our QA department: 06.04.2011.
  • Version 2.24

Servers with Supermicro X7SPE-HF-D525

 

Related articles

BIOS security updates LGA 4189 - 3rd Gen Intel Xeon Scalable processors
Supermicro H8DG6-F Motherboard
Supermicro X9SCA-F Motherboard