Activate OnBoard SATA RAID on Supermicro Motherboards
(Redirected from Settings of the SATA Raids)
Jump to navigation
Jump to search
This article describes how to activate the onboard RAID controller on a Supermicro motherboard.
You have the option for each motherboard to select between Intel and Adaptec (X8 Motherboards) or Intel and LSI (X9 Motherboards).
X10SLH-F
Advanced -> SATA Configuration -> SATA Mode Selection -> RAID
X8SIL
Advanced -> SATA/Floppy Configuration -> SATA#1 Configuration -> Configure SATA as
X8DT3-F
Advanced -> IDE/SATA Configuration -> SATA#1 Configuration -> Configure SATA#1 as
X8DTL-3F
Advanced -> IDE/SATA Configuration -> SATA#1 Configuration -> Configure SATA#1 as
X7SLA-H
Advanced -> IDE Configuration -> ATA/IDE Configuration -> Configure SATA as
X7SBE
Main -> SATA Raid Enable
X7SPA-HF / X7SPE-HF
Advanced -> IDE/SATA Configuration -> SATA#1 Configuration -> Configure SATA# as
H8DME-2
Advanced -> Floppy/IDE/SATA Configuration -> Onboard IDE Controller
H8SCM-F
Advanced -> IDE Configuration -> OnChip SATA Type > RAID
X9SCM(-F)
Advanced -> IDE/SATA Configuration -> SATA Mode > RAID Mode
X9DRI-F
Advanced -> SATA Configuration -> SATA Mode > RAID Mode (only Intel Mode possible)
X9DR7-LN4F
Advanced -> SATA Configuration -> SATA Mode > RAID Mode (only Intel Mode possible)
X9DBL-iF
Advanced -> SATA Configuration -> SATA Mode > RAID Mode (only Intel Mode possible)
X9DRW-3LN4F
Advanced -> SATA Configuration -> SATA Mode > RAID Mode (only Intel Mode possible)
Related articles
CHS and LBA Hard Disk Addresses
PortSmash Side-Channel Vulnerability CVE-2018-5407 information
Read out mainboard name