Nuvoton WPCM450R IPMI Chip with ATEN-Software

From Thomas-Krenn-Wiki
(Redirected from Nuvoton-ATEN)
Jump to: navigation, search
Nuvoton WPCM450R IPMI Chip of a X9DRi-F motherboard.
The Nuvoton WPCM450R IPMI chip with the ATEN software has been built onto certain X7-, H8-, X8- and X9-series Supermicro motherboards. It provides both a web interface for remote server maintenance, including KVM-over-IP, as well as IPMI functionality. See Full Remote Management Supermicro.

Motherboards

The Nuvoton WPCM450R IPMI chip with the ATEN software has been built onto the following motherboards, among others:

Documentation

The current documentation is available for downloading from here:

Network Configuration

The following network modes are available:

  • dedicate – The web interface & IPMI systems can be accessed through the dedicated IPMI NIC port (located above the USB ports)
  • share – The web interface & IPMI systems can be accessed through NIC Port 1. The MAC address for the web interface & IPMI systems is activated as a secondary MAC address parallel to NIC Port 1.
  • failover – If a link is available on the dedicated IPMI NIC port, that port will be used. Otherwise, NIC Port 1 will be used.

Firmware Update

See IPMI Firmware Update for Supermicro Motherboards with ATEN IPMI Software for instructions on how to update the firmware.

IPMI Screenshots Web Interface Menus

The following screenshots were created using a X9SCM-F Motherboard with IPMI Firmware 3.40.

System

Server Health

Configuration

Remote Control

Virtual Media

Maintenance

Miscellaneous

Related articles

IPMI Security Updates
Nuvoton WPCM450R IPMI Chip with AMI-Software
Supermicro IPMI Security Updates July 2014