• high quality power strips for horizontal and vertical installation in the network racks
• 19" montable becouse of the included mounting bracket
• Schuko outlets in 35°-configuration with nicel-plated protection contacts
  
• practical stainless steel brackets for mounting in 4 positions, each 90°
• torsion profile through the use of high-quality anodized aluminium
• Cable: 2,0 m H05VV-F3G1,5qmm with molded protective contact angle plug with dual earthing contact system
  
• 16 A / 3600 Watt
• with overvoltage protection 6,45 kA
• with network and frequency filter
• visual function and failure mode

• For the Exit Expansions of the UPS

• For the steady assembly of servers in server racks 

• For all 19 " distribution cabinets
• 5 x cable bracket (45 x 45)

Delivery Contents:

• Installation Instructions
• 2x Telescopic Rails
• 1x Equipment Shelf
• 1x Equipment Shelt Extension (depth: 100 mm; width: 430 mm)
• Screws (14 screws, 14 nuts, 6 washers, 2 grey screw head covers)
• 4x Hinges

• Mounting instructions
• 2x telescopic rails
• 1x lower shelf
• 1x lower shelf extension (depth: 100 mm; width: 430 mm)
• Screws (14 screws, 14 nuts, 6 washers, 2 gray screw heads)
• 4x angle
• 1x cable joint carrier

• Brush strip for all the lids with cable entry
• for a dustproof and flexible cable entry
• instead of the movable covers in the lid
• for rack width 600 mm

• with integrated cable clamping
• with brush strip for the cable routing
• material: steel sheet, powder-coated structure 

• to mount devices that are not standardized
• to bunch cables

• Height: 50 mm
• Capacity: 400N/roll; 1200N max. static overall laod/ rack

• Fan unit for vertical cooling of modules in 19 "racks
• Fan function (ON / OFF) thermostat-controlled adjustable 0 ° C to 60 ° C

• allows fast positioning of internal components to the right U-position
• standard length 46U, can be cut if necessary
• width: 1 cm

• for flexible and orderly cable management
• Installation position and installation position freely selectable
• open design, no thread

• for flexible and orderly cable management
• Installation position and installation position freely selectable
• open design, no thread

• open version, no thread
• fixture at the outside of the 19" profile
• mounting position freely selectable
• for big amounts of cable

• ideal for the vertical lead and exoneration of cables
• open variation, no thread
• assembly at the outside T groove of the 19" profile
• assembly position freely selectable
• from rack width 600 mm

• for the assembly in both laterals and in front and back door
• for the protecition against unauthorized access
• assembly also possible afterwards

• stationary
• cable entry possible fromm all sides
• panel has louvers at the front and at the back side and an installation option for a filter

• Material: steel sheet, powder-coated structure

• On- and offswitching by the user over the webinterface
• Protocols: http, dhcp, snmp* (* for IPS version)
• Logging function (Syslog server, SNMP Trap*)
• Integrated user administration for 8 users
• The freely definable plug name
• Switchable single IEC sockets
• Switching state will receive in case of power failure
• LED Status Indicator
• LED link and traffic display
• Freely configurable password protection
• Switch with time delay (pulse function)
• PM821-IP for incorporation into prepared 19 inch rack (1U)