Analyse Startvorgang CMM Module Modular Server

Aus Thomas-Krenn-Wiki
Zur Navigation springen Zur Suche springen
Hinweis: Bitte beachten Sie, dass dieser Artikel / diese Kategorie sich entweder auf ältere Software/Hardware Komponenten bezieht oder aus sonstigen Gründen nicht mehr gewartet wird.
Diese Seite wird nicht mehr aktualisiert und ist rein zu Referenzzwecken noch hier im Archiv abrufbar.

Der Startvorgang des CMM Modules beim Modular Server kann durch eine serielle Verbindung ausgelesen werden. Dieser Artikel beschreibt die Einstellungen die dazu erforderlich sind.

PuTTY Einstellungen

Nehmen Sie folgende Einstellungen im PuTTY vor:

Session Einstellungen

Bildbeschreibung

Serial Einstellungen

Folgende Einstellungen sind für die Verbindung zum CMM erforderlich:[1]

  • Speed (Baud): 115200
  • Date Bits: 8
  • Stop Bits: 1
  • Parity: None
  • Flow control: None
Bildbeschreibung

Logging Einstellungen

Bildbeschreibung

PuTTYlog

Dies ist der Inhalt einer PuTTY-Log Datei, nach dem erfolgreichen Reset des CMM-Modules.

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2010.09.02 13:26:24 =~=~=~=~=~=~=~=~=~=~=~=
  
Modular Server Chassis Management Module Build 20225


IP:10.10.10.175 Mask:255.255.255.0 MAC:00:15:17:AA:BB:43


cbcmm login: admin
Password: 
Last login: Thu Sep  2 13:33:09 2010 on ttyS1
[: 22: unknown operand

Modular Server Chassis Management Module Build 20225


IP:10.10.10.175 Mask:255.255.255.0 MAC:00:15:17:AA:BB:43


cbcmm login: =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2010.09.02 13:46:33 =~=~=~=~=~=~=~=~=~=~=~=

Modular Server Chassis Management Module Build 20225


IP:10.10.10.175 Mask:255.255.255.0 MAC:00:15:17:AA:BB:43


cbcmm login: (Ê*Š¥�šÝ¥Ñ¡¥¹Ñ½ÉÕ¹±•Ù•±éÙ5)5%9%QéM•¹‘¥¹Áɽ•Í͕́ѡ•Q�I5ÿSaving system logs to flash 
Harvesting BMC logs from server 1: complete in 1.0876250267029 sec.
Harvesting BMC logs from server 2: complete in 0.98253297805786 sec.
 
done.
Shutting down web server for event handling, pid 1354
Shutting down web server for the UI 1657
Stopping Simple Network Time Protocol: /usr/bin/sntp
No /usr/bin/sntp found running; none killed.
Stopping periodic command scheduler: cron. 
Stopping all BMC instances
Stopping CoreSvc SNMP Trap Event Listener daemon
Stopping CoreSvc Event Manager daemon
Stopping CoreSvc IPMB RX Demux Thread daemon
Stopping network services... 
done
Stopping network management services: snmpd snmptrapd.
Stopping FWUM support daemon: /usr/sbin/in.tftpd 
Initializing random number generator...: done. 
Stopping pm: portmap. 
Stopping system log daemon: klogd syslogd.
Backing up database ... OK
Sending all processes the TERM signal... done.
Sending all processes the KILL signal... done.
Deactivating swap...done.
Unmounting local filesystems...done.
Starting reboot command: reboot
Rebooting...
Restarting system.



BL v1.14


Intel Clear Bay Chassis Management Module
Version: 1.37
Build date: Nov 11 2009 13:00:13

Network initialization
FPGA Loaded. Version 0.20
Eth Port:0 Address: 1.1.1.254 (Static),
           Netmask: 255.255.255.0,
           Gateway: 0.0.0.0,
           MAC:     00:15:17:aa:bb:42
Eth Port:1 Address: 10.10.10.175 (Static),
           Netmask: 255.255.255.0,
           Gateway: 10.10.10.1,
           MAC:     00:15:17:aa:bb:43
CLI Initialization


Press [ENTER] within 5 seconds for CLI, or wait for normal boot: �
Press [ENTER] within 4 seconds for CLI, or wait for normal boot: �
Press [ENTER] within 3 seconds for CLI, or wait for normal boot: �
Press [ENTER] within 2 seconds for CLI, or wait for normal boot: �
Press [ENTER] within 1 second for CLI, or wait for normal boot: �
JFFS2 version 2.2. (SUMMARY)  (C) 2001-2006 Red Hat, Inc.

Mount 0% complete...
Mount 1% complete...
Mount 2% complete...
Mount 3% complete...
Mount 4% complete...
Mount 5% complete...
Mount 6% complete...
Mount 7% complete...
Mount 8% complete...
Mount 9% complete...
Mount 10% complete...
Mount 11% complete...
Mount 12% complete...
Mount 13% complete...
Mount 14% complete...
Mount 15% complete...
Mount 16% complete...
Mount 17% complete...
Mount 18% complete...
Mount 19% complete...
Mount 20% complete...
Mount 21% complete...
Mount 22% complete...
Mount 23% complete...
Mount 24% complete...
Mount 25% complete...
Mount 26% complete...
Mount 27% complete...
Mount 28% complete...
Mount 29% complete...
Mount 30% complete...
Mount 31% complete...
Mount 32% complete...
Mount 33% complete...
Mount 34% complete...
Mount 35% complete...
Mount 36% complete...
Mount 37% complete...
Mount 38% complete...
Mount 39% complete...
Mount 40% complete...
Mount 41% complete...
Mount 42% complete...
Mount 43% complete...
Mount 44% complete...
Mount 45% complete...
Mount 46% complete...
Mount 47% complete...
Mount 48% complete...
Mount 49% complete...
Mount 50% complete...
Mount 51% complete...
Mount 52% complete...
Mount 53% complete...
Mount 54% complete...
Mount 55% complete...
Mount 56% complete...
Mount 57% complete...
Mount 58% complete...
Mount 59% complete...
Mount 60% complete...
Mount 61% complete...
Mount 62% complete...
Mount 63% complete...
Mount 64% complete...
Mount 65% complete...
Mount 66% complete...
Mount 67% complete...
Mount 68% complete...
Mount 69% complete...
Mount 70% complete...
Mount 71% complete...
Mount 72% complete...
Mount 73% complete...
Mount 74% complete...
Mount 75% complete...
Mount 76% complete...
Mount 77% complete...
Mount 78% complete...
Mount 79% complete...
Mount 80% complete...
Mount 81% complete...
Mount 82% complete...
Mount 83% complete...
Mount 84% complete...
Mount 85% complete...
Mount 86% complete...
Mount 87% complete...
Mount 88% complete...
Mount 89% complete...
Mount 90% complete...
Mount 91% complete...
Mount 92% complete...
Mount 93% complete...
Mount 94% complete...
Mount 95% complete...
Mount 96% complete...
Mount 97% complete...
Mount 98% complete...
Mount 99% complete...
Mount 100% complete...
Mounting local storage: OK!
Searching for firmware bundle...
ùProcessing firmware bundle: CMM_Core.zip
ùFilesystem name: "ramdisk.gz"
Command Line name: "cmdline"
Kernel name: "linux425-eth-rd"
-CMM firmware bundle validated.
Booting CMM Firmware...
Linux version 2.6.10_mvl401p1334-ixdp42x-arm_xscale_be (build@cleardev) (gcc version 3.4.3 (MontaVista 3.4.3-25.0.135.0702900 2007-04-01)) #2 Mon Apr 19 20:48:00 PDT 2010

CPU: XScale-IXP42x Family [690541c2] revision 2 (ARMv5TE)

CPU0: D VIVT undefined 5 cache

CPU0: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets

CPU0: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets

Machine: Intel IXDP425 Development Platform

Memory policy: ECC disabled, Data cache writeback

Built 1 zonelists

Kernel command line: console=ttyS1,115200 ip=bootp root=/dev/ram initrd=0x09c8e1c8,27M ixp0=00:15:17:aa:bb:42 ixp1=00:15:17:aa:bb:43 ip0=1.1.1.254 nm0=255.255.255.0 dhcp0=off ip1=10.10.10.175 nm1=255.255.255.0 dhcp1=off gw=10.10.10.1 hostname=cbcmm 

PID hash table entries: 2048 (order: 11, 32768 bytes)

Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)

Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)

Memory: 256MB = 256MB total

Memory: 228656KB available (2243K code, 655K data, 132K init)

Mount-cache hash table entries: 512 (order: 0, 4096 bytes)

CPU: Testing write buffer coherency: ok

spawn_desched_task(00000000)

desched cpu_callback 3/00000000

ksoftirqd started up.

desched cpu_callback 2/00000000

desched thread 0 started up.

checking if image is initramfs...it isn't (no cpio magic); looks like an initrd

Freeing initrd memory: 27648K

NET: Registered protocol family 16

IXP4xx: Using 0MiB expansion bus window size

Registering platform device 'IXP4XX-I2C.0'. Parent at platform

Registering platform device 'IXP4XX-Flash.0'. Parent at platform

PCI: IXP4xx is host

PCI: IXP4xx Using direct access for memory space

PCI: bus0: Fast back to back transfers enabled

NetWinder Floating Point Emulator V0.97 (double precision)

JFFS2 version 2.2. (NAND) (SUMMARY)  © 2001-2006 Red Hat, Inc.

IXP4xx Watchdog Timer: heartbeat 60 sec

Serial: 8250/16550 driver $Revision: 1.90 $ 2 ports, IRQ sharing disabled

Registering platform device 'serial8250'. Parent at platform

ttyS0 at MMIO 0xc8000000 (irq = 15) is a XScale

ttyS1 at MMIO 0xc8001000 (irq = 13) is a XScale

io scheduler noop registered

io scheduler anticipatory registered

io scheduler deadline registered

io scheduler cfq registered

RAMDISK driver initialized: 2 RAM disks of 80896K size 1024 blocksize

loop: loaded (max 8 devices)

i2c /dev entries driver

Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2

ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx

elevator: using anticipatory as default io scheduler

IXP4XX-Flash.0: Found 1 x16 devices at 0x0 in 16-bit bank

 Intel/Sharp Extended Query Table at 0x0035

cfi_cmdset_0001: Erase suspend on write enabled

Searching for RedBoot partition table in IXP4XX-Flash.0 at offset 0x1f0000

No RedBoot partition table detected in IXP4XX-Flash.0

cmdlinepart partition parsing not available

mice: PS/2 mouse device common for all mice

NET: Registered protocol family 2

IP: routing cache hash table of 2048 buckets, 16Kbytes

TCP: Hash tables configured (established 16384 bind 32768)

NET: Registered protocol family 1

NET: Registered protocol family 17

NET: Registered protocol family 8

NET: Registered protocol family 20

IP-Config: No network devices available.

RAMDISK: Compressed image found at block 0

VFS: Mounted root (ext2 filesystem).

Freeing init memory: 132K


INIT: version 2.85 booting

Calculating module dependencies
Loading modules: 
/proc/gpiofpga created

gpio-cb_cmm			OK
i2c-cb_cmm			OK
rtc_st41t81			OK
Registering platform device 'sd-cb_cmm'. Parent at platform

mmc0: host does not support reading read-only switch. assuming write-enable.

mmcblk0: mmc0:e624 SU01G 992000KiB 

 mmcblk0: unknown partition table

sd-cb_cmm			OK
ixp400_eth: Initializing IXP400 NPE Ethernet driver software v. 1.7 

ixp400_eth: CPU clock speed (approx) = 532 MHz

ixp400_eth: Using static configuration

ixp400_eth:   PHY 0 not present

ixp400_eth:   PHY 1 not present

ixp400_eth: Restarting autonegotion on PHY1 (28)

ixp400_eth: ixp0 is using NPEB

ixp400_eth: ixp1 is using NPEC and the PHY at address 28

Registering platform device 'ixp400_eth.0'. Parent at platform

ixp400_eth: Use default MAC address 00:02:b3:01:01:01 for port 0

Registering platform device 'ixp400_eth.1'. Parent at platform

ixp400_eth: Use default MAC address 00:02:b3:02:02:02 for port 1

ixp400_eth			OK
blkmtd: version $Revision: 1.25 $

blkmtd: mtd0: [/dev/mmcblk0] erase_size = 128KiB 

blkmtd			OK
Installing FPGA Driver...
Installing I2C Driver...
Installing GPIO Driver...
Mounting local filesystems: mount UZ]Hª���’�R�“Š’ÒŠš�’‚Š‚��j‚rŠš’Âʲ�š•½¹‘Íé
±•…¹¥¹½Í‘Á½ÑÉ…Í¡¹¹¹5)ÿThu Sep  2 14:12:14 2010  -0.779731 seconds: Checking bundle type...
UZ]Hª���’�R�“ŠšÒ‚Â�’‚Š‚��j‚rš¢šÂŠº�š•½¹‘Íé�áÑÉ…Ñ¥¹Ñ¡•µ…¹¥™•Íѹ5)ÿ..done
Thu Sep  2 14:13:09 2010  -0.940581 seconds: Evaluating manifest...
H,¬5µµ}Í‘}É•ÅÕ•ÍÑ¡¥éÁ½ÍÑ}µ½Õ¹Ñ}…¡•}ͥ镁õÅÉá-	)5ÿThu Sep  2 14:14:28 2010  -0.132040 seconds: Extracting OEM Files
..done
Thu Sep  2 14:14:32 2010  -0.440988 seconds: Unpacking OEM Files
............done
Thu Sep  2 14:14:51 2010  -0.202324 seconds: Updating help links...
Thu Sep  2 14:14:54 2010  -0.455101 seconds: Current FW Versions...
Package: 2.20224
FAN: 1.02
PSB: 1.02
CBM: 1.36.6
BIOS[0]: SB5000.86B.10.00.0050.083120090939
CBM-VI: 1.19.2
BIOS[0]: S5500.86B.01.30.0048.041920101141
ESM: 1.0.0.27
SCM: 3.5.140.11
CMM: 6.1.100.20100419.20225
Thu Sep  2 14:14:53 UTC 2010 Validating Settings Database
Checking database integrity... OK
Backing up database ...DONE
Setting up networking (ifupdown) ..
Cleaning: /etc/network/run/ifstate done.
Setting up filters: done.
Disable ntfy: done.
Starting network interfaces: done.
EBF Hostname is "cbcmm"
DB  Hostname is "cbcmm"
Using hostname "cbcmm"
Getting configuration for NPE Device ixp0... done
Configuring ixp0 for static IP 1.1.1.254... done
Configuring MAC address 00:15:17:aa:bb:42 for ixp0... done
Starting device ixp0... done
Getting configuration for NPE Device ixp1... done
Configuring ixp1 for static IP 10.10.10.175... done
Configuring MAC address 00:15:17:aa:bb:43 for ixp1... done
Starting device ixp1... done
Saving network settings for UI... done
pm ok. 
Configuring timezone Europe/Berlin
Getting date/time from RTC Thu Sep  2 14:15:09 CEST 2010
Network Info:
Configuring firewall...ip_tables: (C) 2000-2002 Netfilter core team

ip_conntrack version 2.1 (2048 buckets, 16384 max) - 304 bytes per conntrack

done
Cleaning: /tmp /var/lock /var/run done.
Initializing random number generator...: done. 

INIT: Entering runlevel: 3

Starting FWUM support daemon:  
Writing Ldap Config....OK
Writing Snmp Config....OK
Simple Network Time Protocol is not configured.
Starting system log daemon: syslogd klogd.
Starting web server for event handling
Starting CoreSvc IPMB RX Demux Thread... ok
Starting CoreSvc Event Manager... ok
Starting CoreSvc SNMP Trap Event Listener... ok
Starting CoreSvc Chassis BMC IPMI Stack... ok
Starting Network Services...  done
Starting network management services: snmptrapd snmpd.
Thu Sep  2 14:16:00 CEST 2010: Seeding settings DB...............................done
Checking HTTPS Certificate...(certificate has not expired)
Waiting for management stack to initialize (done)
Starting web server for UI
?W–�WËë�	ɽµ½¹5)ÿStarting periodic command scheduler: cron. 
Harvesting BMC logs from server 1: complete in 1.1756930351257 sec.
Harvesting BMC logs from server 2: complete in 1.0168437957764 sec.
 

Modular Server Chassis Management Module Build 20225


IP:10.10.10.175 Mask:255.255.255.0 MAC:00:15:17:AA:BB:43


cbcmm login: 

Einzelnachweise

Das könnte Sie auch interessieren

Interner Aufbau des Intel Modular Servers
Kleine Festplatten im laufenden Betrieb durch größere ersetzen
Restore System Settings beim Modular Server